Lets see your modelling work areas

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

I reckon the closet needs a shelf redesign. It would make a heap more space so you could neaten it up more easily.
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
Twokidsnosleep
General
General
Posts: 18481
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: Lets see your modelling work areas

Post by Twokidsnosleep »

digger303 wrote: Mon Jan 23, 2023 4:30 am I reckon the closet needs a shelf redesign. It would make a heap more space so you could neaten it up more easily.
:cheers2:
Yes!
I am thinking of some shelf boards across the back
I didn’t expect to have quite so many kits :think:
Perhaps not buying so many and slimming down the stash might be a wise option as well :whistle:
The other elephant in the room is the display of finished models. I need more shelving for that mess too
Scott

On, Under or near the desk
Mr Tamiya Memorial build...Alfa Romeo Bt-46
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

Yep that's what I was thinking and I also am needing some more space for displays and that project is slowly underway.....way slow :)
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
cor
Warrant Officer
Warrant Officer
Posts: 1532
Joined: Sun May 23, 2021 10:34 am
Location: Sydney, Australia
Australia

Re: Lets see your modelling work areas

Post by cor »

Twokidsnosleep wrote: Mon Jan 23, 2023 1:06 am So we allude a lot about low mojo and mental stuff on here.
I am battling an all time low of modelling…like the sell it all and F it all kinda low
Can’t seem to get going new on or finishing old projects and not as much interest
“The problem isn’t the problem; your attitude about the problem is the problem”

Reminds me of the saying, There is no you and the problem; there is only you, which is the problem.

You have a nice looking selection of F1 machines. Surely a long slow deliberate build of one of those beauties will do something for your mojo. Good luck, whatever direction you choose to go in.
User avatar
KalebB
Command Sergeant Major
Command Sergeant Major
Posts: 934
Joined: Thu Feb 06, 2014 6:01 am
Location: Southern Indiana, USA
United States of America

Re: Lets see your modelling work areas

Post by KalebB »

Well this is the current setup for now, I regret daily selling my entire setup back when I went through some hard times but I'll slowly build it back to what it once was. Definitely need more tools and paints stat :lol:

Image
"This is Jack Burton in the Pork Chop Express, and I’m talkin’ to whoever’s listenin’ out there" ~ Jack Burton

On the Bench
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

You won't need a lot of paint for those little guys so all's good and take your time to buy the good tools.
Your bench has potential it could be anything the sky's the limit.
Thanks for sharing.
:th: :th: :th:
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
BigWall
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2961
Joined: Sun Mar 15, 2020 11:44 pm
Location: Denver, Colorado
United States of America

Re: Lets see your modelling work areas

Post by BigWall »

It looks perfect! You can create more space just by moving the books to a bookshelf and buying a cheap set of plastic filing drawers to go under the table. Buy the tools and paints as you need them.
Joe

Image
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

Been a while since I posted in this thread.
Rest assured apart from a couple of extra shelves it hasn't changed much even with this year being my most productive I haven't caught up.... :lol:
Image
Image

:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
bfrd
Site Admin
Site Admin
Posts: 1993
Joined: Tue Aug 01, 2017 11:43 am
Location: Carrollton, TX
Contact:
United States of America

Re: Lets see your modelling work areas

Post by bfrd »

Would that be your picture over the door? You look much different than your avatar.
Matthew (or Bifford if you prefer)
Stash
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

bfrd wrote: Sun Jul 30, 2023 5:11 pm Would that be your picture over the door? You look much different than your avatar.
It's the Mo I shaved it off, it was getting that way I couldn't move around in public without a fuss.... ;)

It's My daughter and I.

:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

One more pic...the work area.....10 x10 inches

Image

:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
Rayjac
New Recruit
Posts: 2
Joined: Tue Apr 05, 2022 1:15 pm
Belgium

Re: Lets see your modelling work areas

Post by Rayjac »

Here is my sanctuary, no wife and/or children
allowed.
Image
Image
Image
User avatar
aur0ra145
Second Lieutenant
Second Lieutenant
Posts: 3161
Joined: Thu Jan 14, 2016 9:44 am
Location: TX
Contact:
United States of America

Re: Lets see your modelling work areas

Post by aur0ra145 »

Rayjac wrote: Sat Sep 23, 2023 3:55 pm Here is my sanctuary, no wife and/or children
allowed.
Image
Image
Image
That is amazing!
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

Rayjac wrote: Sat Sep 23, 2023 3:55 pm Here is my sanctuary, no wife and/or children
allowed.
Image
Image
Image
The pic's aren't showing for me ?
Do I need a drop box account ?
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
BigWall
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2961
Joined: Sun Mar 15, 2020 11:44 pm
Location: Denver, Colorado
United States of America

Re: Lets see your modelling work areas

Post by BigWall »

digger303 wrote: Sun Sep 24, 2023 12:51 am The pic's aren't showing for me ?
Do I need a drop box account ?
:cheers2:
I right clicked them and opened in a new window to get them to show
Joe

Image
User avatar
Twokidsnosleep
General
General
Posts: 18481
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: Lets see your modelling work areas

Post by Twokidsnosleep »

BigWall wrote: Sun Sep 24, 2023 2:35 am
digger303 wrote: Sun Sep 24, 2023 12:51 am The pic's aren't showing for me ?
Do I need a drop box account ?
:cheers2:
I right clicked them and opened in a new window to get them to show
I get nothing :scratch:: :scratch::
Scott

On, Under or near the desk
Mr Tamiya Memorial build...Alfa Romeo Bt-46
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Lets see your modelling work areas

Post by digger303 »

BigWall wrote: Sun Sep 24, 2023 2:35 am
digger303 wrote: Sun Sep 24, 2023 12:51 am The pic's aren't showing for me ?
Do I need a drop box account ?
:cheers2:
I right clicked them and opened in a new window to get them to show

Yep works now ......right click....open in new tab
Thanks

Love a room like that, big, light and almost hermetically sealed.
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: Lets see your modelling work areas

Post by RangerNeil »

Twokidsnosleep wrote: Sun Sep 24, 2023 2:36 am
BigWall wrote: Sun Sep 24, 2023 2:35 am
digger303 wrote: Sun Sep 24, 2023 12:51 am The pic's aren't showing for me ?
Do I need a drop box account ?
:cheers2:
I right clicked them and opened in a new window to get them to show
I get nothing :scratch:: :scratch::
Same here - just place-holder icons and the word image. :( Using a smartphone if that makes a difference?
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Lets see your modelling work areas

    Post by digger303 »

    RangerNeil wrote: Sun Sep 24, 2023 10:57 am
    Twokidsnosleep wrote: Sun Sep 24, 2023 2:36 am
    BigWall wrote: Sun Sep 24, 2023 2:35 am

    I right clicked them and opened in a new window to get them to show
    I get nothing :scratch:: :scratch::
    Same here - just place-holder icons and the word image. :( Using a smartphone if that makes a difference?
    I'm using a desk top, it may make a difference..... :?

    I down then uploaded the pic's myself.
    Image
    Image
    Image

    Howsat !
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    User avatar
    RangerNeil
    Major
    Major
    Posts: 4745
    Joined: Fri Jul 12, 2019 9:42 pm
    Location: Dagenham
    Contact:
    Great Britain

    Re: Lets see your modelling work areas

    Post by RangerNeil »

    Thanks Digger - now THAT is a cracking work place!!! :)
      Neil (yet another one...)

      On the board now:

      Airfix 1/35 Alvis Stalwart Mk2 FV622
      Hasegawa 1/48 A8 Crusader

      Scalemates stash info
      =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
      Chines123
      Private
      Private
      Posts: 8
      Joined: Thu Oct 26, 2023 1:46 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by Chines123 »

      Here is my Hobby desk setup when I lived in Seoul, South Korea and the other is when I was getting ready to move.
      You do not have the required permissions to view the files attached to this post.
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      Wow very nice bench , love those 2 colour organisers.
      Can't help but notice the stash bias towards Trumpeter kits.
      Was that because the local hobby shop if you had one mainly stocked that brand ?
      I hope that move was relatively mishap free.
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      Chines123
      Private
      Private
      Posts: 8
      Joined: Thu Oct 26, 2023 1:46 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by Chines123 »

      digger303 wrote: Sun Oct 29, 2023 10:51 pm Wow very nice bench , love those 2 colour organisers.
      Can't help but notice the stash bias towards Trumpeter kits.
      Was that because the local hobby shop if you had one mainly stocked that brand ?
      I hope that move was relatively mishap free.
      :th: :th: :th:
      :cheers2:
      I had a Hobby shop near me that was mostly Trumpeter and was at a great price compared to the U.S. so I told meself I was stocking up :)
      User avatar
      DRUMS01
      Chief Warrant Officer 4
      Chief Warrant Officer 4
      Posts: 2352
      Joined: Wed Jun 08, 2016 1:48 am
      Location: Ohio, USA
      United States of America

      Re: Lets see your modelling work areas

      Post by DRUMS01 »

      It's been a very, very long time since I posted a photo of my modeling domain. I say domain because my modeling space takes up about 3/4 of a full basement of our ranch home (about 950 sq. ft. for my space). Well, here goes....

      MODEL BUILDING AREA:

      Image

      Image

      SOME DISPLAY AREAS:

      Image

      Image

      Image

      Image

      Image

      Image

      I guess I need to update more photos of the displays as they've improved. As for stash photos, I'll save them for another time.

      One of my next big projects will be changing some of the display space around and adding more enclosed shelving.
      On the table or recently completed:

      1/18 AV8-B Harrier - WIP
      1/35 Churchill AVRE with SBG Bridge Diorama - DONE
      75mm BMW R75 WW2 motorcycle with rider - DONE
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      DRUMS01 wrote: Mon Oct 30, 2023 11:40 pm It's been a very, very long time since I posted a photo of my modeling domain. I say domain because my modeling space takes up about 3/4 of a full basement of our ranch home (about 950 sq. ft. for my space). Well, here goes....

      MODEL BUILDING AREA:

      Image

      Image

      SOME DISPLAY AREAS:

      Image

      Image

      Image

      Image

      Image

      Image

      I guess I need to update more photos of the displays as they've improved. As for stash photos, I'll save them for another time.

      One of my next big projects will be changing some of the display space around and adding more enclosed shelving.
      Wonderful space. I always wanted a basement and to have my modelling area housed in it.
      IF I did have one the missus would be pushing me to get the walls painted and finished off........ :lol: I don't really laugh when she suggests such things. Only yesterday she wanted to organise my wood work area. I know the way she works her organising means chucking out a lot of stuff....useful stuff like timber, sand paper, paint and tools....offer was firmly refused thanks but NO. :lol:
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      Chines123
      Private
      Private
      Posts: 8
      Joined: Thu Oct 26, 2023 1:46 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by Chines123 »

      Here is my workshop/office in the United States
      You do not have the required permissions to view the files attached to this post.
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      Pretty sweet.
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      SNautRight
      Private
      Private
      Posts: 17
      Joined: Thu Sep 05, 2024 2:35 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by SNautRight »

      Pretty retro. The table predates me, circa ~1953.
      ImageImageImageImage
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      You've got a nice big space for everything even huge flying boats on display. I'm :mrgreen: :D
      :th: :th: :banana: :banana: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      SNautRight
      Private
      Private
      Posts: 17
      Joined: Thu Sep 05, 2024 2:35 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by SNautRight »

      digger303 wrote: Mon Sep 23, 2024 1:10 am You've got a nice big space for everything even huge flying boats on display. I'm :mrgreen: :D
      :th: :th: :banana: :banana: :th:
      :cheers2:
      Yes. It's the basement. Lots of room to hand the 1/32 models I'm getting into. The modern equivalent of a cave. A man cave. 1550 sq. ft. Mine! All Mine! Don't tell my Mrs.
      User avatar
      KalebB
      Command Sergeant Major
      Command Sergeant Major
      Posts: 934
      Joined: Thu Feb 06, 2014 6:01 am
      Location: Southern Indiana, USA
      United States of America

      Re: Lets see your modelling work areas

      Post by KalebB »

      Well, after a few years of being unable to model due to life forfeiting me of area/ space to do it in, I have finally gained a new area to start my hobby again.

      Most of my supplies and tools have been either lost, stolen, or gone bad so not starting out again with very much.

      But I will make it work! The new work desk is an old closet door with boxes of hand sanitizer as legs :lol:

      Ready to get back into it and get stuck in. :pistols:


      ImageImage
      "This is Jack Burton in the Pork Chop Express, and I’m talkin’ to whoever’s listenin’ out there" ~ Jack Burton

      On the Bench
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      Might not look much atm , but look at the potential and the fun plus satisfaction of building it up the way you want.
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      runnerUA
      Private First Class
      Private First Class
      Posts: 33
      Joined: Thu Jun 19, 2025 5:48 pm
      United States of America

      Re: Lets see your modelling work areas

      Post by runnerUA »

      love the setups! thank you for sharing
      User avatar
      Portman
      Staff Sergeant
      Staff Sergeant
      Posts: 165
      Joined: Wed Apr 29, 2026 1:31 pm
      Wales

      Re: Lets see your modelling work areas

      Post by Portman »

      I've been having a revamp of my area over the past week or so, so I could get my extraction booth in...

      Image

      And I had some cash for my birthday, with which I've bought a new light - 3,500 lumens mmmmwahahaha!!!

      Image
      Fortune Favours the Brave, whilst I favour hiding behind the sofa...
      User avatar
      cor
      Warrant Officer
      Warrant Officer
      Posts: 1532
      Joined: Sun May 23, 2021 10:34 am
      Location: Sydney, Australia
      Australia

      Re: Lets see your modelling work areas

      Post by cor »

      Nice space
      That light looks killer
      User avatar
      Portman
      Staff Sergeant
      Staff Sergeant
      Posts: 165
      Joined: Wed Apr 29, 2026 1:31 pm
      Wales

      Re: Lets see your modelling work areas

      Post by Portman »

      cor wrote: Sat Jun 06, 2026 1:44 pm Nice space
      That light looks killer
      Thanks Cor!

      It's brilliant - far far better than the crappy one I had before it - my poor eyes can actually see again now!
      Fortune Favours the Brave, whilst I favour hiding behind the sofa...
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Lets see your modelling work areas

      Post by Stokesy44 »

      Portman wrote: Sat Jun 06, 2026 6:34 pm
      cor wrote: Sat Jun 06, 2026 1:44 pm Nice space
      That light looks killer
      Thanks Cor!

      It's brilliant - far far better than the crappy one I had before it - my poor eyes can actually see again now!
      That's a very nice looking corner and I love the light too. I have something similar and its an absolute deal breaker as far as working inside goes.
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Lets see your modelling work areas

      Post by digger303 »

      Great decision buying that light, you'll never regret it.
      :clap: :clap: :clap:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      User avatar
      Portman
      Staff Sergeant
      Staff Sergeant
      Posts: 165
      Joined: Wed Apr 29, 2026 1:31 pm
      Wales

      Re: Lets see your modelling work areas

      Post by Portman »

      Stokesy44 wrote: Sat Jun 06, 2026 7:29 pm

      That's a very nice looking corner and I love the light too. I have something similar and its an absolute deal breaker as far as working inside goes.
      Thanks Stokesy - it's not a bad little space and it's been great to actually see stuff now!
      digger303 wrote: Sat Jun 06, 2026 11:57 pm Great decision buying that light, you'll never regret it.
      :clap: :clap: :clap:
      :cheers2:
      Thanks Digger :cheers2: I'm really pleased with it, it's so nice to actually see what you're doing!
      Fortune Favours the Brave, whilst I favour hiding behind the sofa...
      Post Reply

      Return to “Modelling Chat”