Revell Eurofighter Typhon Twin seater 1:48

[Nevbo]

I thought I'd have a go at a larger and more challenging model, I've only done four or five 1:72 planets so far, I liked the look of the Eurofighter so I bought it from Hobbycraft ( it was either this or several bags of little coloured rubber bands!!).

So, I've started with the two seats and I have my first dilemma, should I assemble them prime and paint or prime and paint then assemble.

I'll try and keep this builds progress logged as I go along.

[Johni044]

If asked that question a few months ago then I would have said paint and assemble but now I tend to assemble then paint.

I've found that some of the new CAD developed kits have such fine tolerances that a couple of layers of paint can affect the alignment of the parts. You also tend to get a much more secure structure as well.

It doesn't have to be all of one of course, you could always paint parts that would be difficult to access after assembly first and do the rest post assembly.

[UKguyInUSA]

That looks like it could be a nice kit to build. How old is the kit?
Regarding your question, personally, I'd assemble then prime

[Nevbo]

Thanks for the advice, I'll assemble then prime.

How do I check how old this model is?

[Nige201980]

Hi mate I've recently built but not primed the single seater of this kit here is the link
http://intscalemodeller.com/viewtopic.php?f=35&t=6224
Watch out for the intake area as it can be a bit of a problem and in my opinion and a bit over engineered
As to your question build then prime/paint
But best of luck buddy I hope you enjoy it.

Martin it's was released in about 2001

[Nevbo]

I've partly assembled the seats and some of the cockpits and primed them with humbrol white matt primer ( rattle can).



I've painted inside the back of the seats and the back before i've glued them together.


so that there are no white bits showing that I can not get at.


This seems to have worked fine.

[Gav0909]

Looking good. I tend to build as much as I can before painting, this saves on the number of sub assemblies to paint, and plus I hate gluing together already painted parts.

I have this kit in the stash, so will be looking forward to seeing you build yours.

[Johni044]

Certainly are looking good.

In reply to how old the kit is, this might help.

http://www.scalemates.com/products/prod ... ?id=111798

It's a good sight for history of kits and reviews of potential buys.

[robertw]

Definitely assemble then paint.

[Nevbo]

Painted and dry brushed the seats, I'm very happy with how they look.

[vyper1]

You've made a good start Nevbo I'll be watching this one closely as I have the single seater in my stash waiting for me to start.

[Nevbo]

I've made a start on the cockpits. Mixed up Revells little Grey ( 75% grey 25% white )


I made a bit of a cockup of the cockpits to start off with.


But I hope I've sorted them out and they look much better now

[Nevbo]

Started put the fuselage together and the first thing a found was the pilots display screens were too upright and didn't fit up against the front of the cockpit opening, so I had to snap it off and reposition it correctly.


Then I nearly missed this little piece at the back


Got the two halves together easily and gave the cockpit rim a coat of revell anthracite. It'll need another one tomorrow.

[EasyEight96]

Great job love the paint job so far. Looks neater than an airbrush paint job

[Nevbo]

I've put a few more parts together


I've started to assemble the air intakes, they are over engineered ( as you saidNige201980 ) and nothing fits together very well

And there's a flipping hole in the side of me plane !!!!!!


Not Happy

[Nevbo]

Hole sorted

fit this part at the correct stage and you don't have a hole.

[Nevbo]

Put the wing on now and they done fit at all well



It doesn't show on the picture, but there is a big gap between the wing and fuselage of the plane.

This is getting worse as I go along.

[Nevbo]

Done a bit more on the Eurofighter. I've decided to have a closed canopy

[EagleOnyx]

It looks great so far!

What are those blue boxes the jet is sitting on?

[Nevbo]

Revell paints, mate.

[vyper1]

Coming along nicely

[UKguyInUSA]

Looking good so far, mate!

[Nevbo]

Finally got some time to do a bit more.

[vyper1]

Landing gears is another part I hate doing especially if the instructions aren't clear

[Nevbo]

Finished the main part of the build, primed in white.


Painted and glossed ready for the hundreds of decals!

[UKguyInUSA]

Sweet! Looking forward to seeing her with her decals on now mate!

[Nevbo]

Decals! Decals! Decals!

There are one or two decals on this plane!


You may also see at the bottom of the last photo a gap has appeared at the back of the canopy

[Nevbo]

Finished.


I'm sort of happy with this build. From certain angles it looks good, just don't look to close!


What do I think about this kit and how to build went?

1. Apart from me not following the instructions and thinking I had a hole in my plane and the decals numbers being wrong for the screens in the instrument panels, they were easy to follow and relatively easy to work out what to paint which colour.

2. Some parts of the model were too elaborate and some didn't fit together at all well, leaving me with gaps all over

3. The decal placement instruction were not to clear leading me to guess where a decal should go and also a colour instruction sheet would have made it easier to see what colours went where.

4. The canopy had so much flash on it you could have made a 1:72 scale model out of it, so when I finally go all that off it didn't fit properly ( should have take a photo of it )

These build and fit problems did put me off a bit, so I'm glad it's finished.

So, If you are good at fixing and filling build problems, this is the model for you.

[josepedro]

Hi!

It looks fine!
from here, it seems you had quite a learning curve with this model, and you are to be commended!
Looking forward for your next build!

José Pedro

[Nevbo]

Cheers Jose.

[Nige201980]

It looks great to me mate. I was disappointed with mine it why it took so long to build and I had all the same problem buddy.

And you have done a top job on a so so kit.

[Nevbo]

Cheers, Nige.

[UKguyInUSA]

Apart from the issues you point out, you stuck with it and turned it around...great job and commendable effort!

[purplejarvy]

Hi.
Great job! A great guide for me as I have just started this kit (a christmas present from my wife). Hope it turns out as nice as yours!

[amsvkng]

Very nice model, I was looking at this one in the store and makes me regret not just getting it

Amsvkng

[m0rce]

Great result. Surely will look great in your display cabinet/shelf.
Well done.
Regards
Sergio