Trumpeter 1/32nd F-100D 'Hun'

Post by **pmarshall** » Mon Apr 06, 2015 12:35 pm

Next project something little and simple - ok maybe not so small, and not so simple - a nice 1/32nd F-100 "Hun". Also has some Eduard PE extras, and a master Pitot tube.

Now as i've got the Eduard PE set for the Seat, the first work is chopping up some of the plastic parts ( and filling a couple of sink marks ).

Then assemble the base of the seat, with the PE parts for the head rest supports.

Coat of black primer over everything

Followed by a coat of Aircraft Grey ( Gunze H57 )

Finally base coats for the seat, and a coat of satin varnish over the top to prep for some filters, and prior to adding the PE belts.

Peter

Post by **pmarshall** » Sat Apr 11, 2015 3:07 pm

Today's work on the Hun - first phase, started adding the PE Belts - the F-100 seems to have a multitude of belts

Then after a few hours work, added the sides, leg guards, rest of the belts and the seat it finally done

Peter

Post by **UKguyInUSA** » Sat Apr 11, 2015 4:15 pm

Awesome ejector seat, those seat belts look fabulous!

Post by **TheWeasel** » Sat Apr 11, 2015 8:28 pm

Almost a shame to hide such a great and detailed bang seat inside another model. Great work!

Post by **pmarshall** » Sun Apr 12, 2015 4:53 pm

Today's work on the Hun.

First the Gunsight and the combing - first assemble the 3 parts, and mask off the clear reflector. Added some solder wiring to the gunsight as well.

Then sprayed matt black over the top, then a light dusting with Dark Slate Grey pigment. A blob of Ammo Green Clear in the projector.

Then picked out the segments on the gunsight adjuster

Next up assembled the main cockpit tub - as the Eduard set for the seat narrows the seat, this required removing the seat rails and replacing with plastic rod a couple of mm closer together.

Then sprayed the whole thing with Gunze H57 Aircraft grey, then blocked out the main colours within the cockpit.

Base dry brushing with a light grey

Finally picked out the details, oil washes to blend things together, matted down, and assembled to cockpit - happy with how it's turned out

Peter

Post by **Goose** » Sun Apr 12, 2015 5:49 pm

Ooooh my god!! Nice painting skills here!

Congrats!!

Bruno akaGoose

Post by **Navcom** » Sun Apr 12, 2015 11:24 pm

Great job! But I think you need more belts.

Love the detail. Great job bringing out the switches and dials. Looking forward to seeing the rest come together!

Post by **cesare** » Mon Apr 13, 2015 11:34 pm

the office looks great!!!1 fantasic

Post by **JET** » Tue Apr 14, 2015 12:54 am

Wow! That's some detail!

Post by **rwsmith14** » Tue Apr 14, 2015 2:55 am

Cockpit looks awesome. Well done!

Post by **MikeyKb** » Tue Apr 14, 2015 9:52 pm

incredible work! that is one b-utiful cockpit!!

Post by **pmarshall** » Sat Apr 18, 2015 4:11 pm

Today's work - the Big J57 engine. Only really bothered with the front and back, as they will be the only bits seen but still took all day to assemble and paint - Mixture of Alclads and oil washes to get to this stage

Front

Back

Peter

Post by **Nige201980** » Sat Apr 18, 2015 6:27 pm

Brill work mate

Post by **pmarshall** » Sun Apr 19, 2015 3:55 pm

Today's work - Wings. First assembled the wings, slotting the slats into place ( try saying that three times quickly

). Took quite a long time due to having to fill quite a lot of ejector marks on the slats.

Then removed the slats and primed the slats. Ready to try the AK Interactive Extreme Metal 'Duralumin'

Sprayed neat at 15psi - seems to work nicely

Compare very favourably with Alclad - though they are Enamel rather than Laquer - they smell less, but take longer to dry. They are supposed to be tougher as well - will be able to test that when I mask off the slats

Peter

Post by **shortCummins** » Sun Apr 19, 2015 4:39 pm

good test for the extreme metal, I'll be watching with interest

rgds
John(shortCummins)

Post by **pmarshall** » Mon Apr 20, 2015 3:42 pm

Week off this week, so more done today. First started by masking off the slats

Then the nasty bit - the intake trunking, which has quite a lot of ejector pin marks to fill

A coat of black primer once sanded back

Then assemble the trunking, and start squeezing everything in the fuselage

Finally added the rear fuselage section

Peter

Post by **UKguyInUSA** » Mon Apr 20, 2015 4:07 pm

Beautiful build so far! That tub looked amazing! Fabulous job making the instrument panel and console dials, buttons and switches pop!

Cheers

Martin

Post by **pmarshall** » Tue Apr 21, 2015 2:55 pm

Today's work - much of it a slog, but that's how these things go. Fitted all the panels for the gun bays, insets for the radar and gun channels. All of them needed blending in with Mr Surfacer 500 and in a couple of cases Squadron White. Lots of sanding back afterwards.

Then followed an epic rescribing session to restore rivets and panel lines. Followed by running along the panel lines with some Tamiya Extra Thin

Finally blasted some Aluminium down the intake after blending it - just to feel like I got something done

Peter

Post by **peaceduringwar** » Tue Apr 21, 2015 4:51 pm

Looking very good. I always liked that aircraft. I will keeping up with your progress.

Post by **pmarshall** » Wed Apr 22, 2015 2:35 pm

Today - Eduard's External PE Set. Annealed first so that the plates will bend easily over the fuselage.

Then added the wings - needed a small shim in the Port wing root, and then some Mr Surfacer 500 but nothing major.

Peter

Post by **pmarshall** » Thu Apr 23, 2015 4:18 pm

Today's work after painting the shed. First added the skid plate and the tail hook

Then added the details to the main landing gear bays, added a few wires to busy up the area

The photo's i've found show that the Vietnam era Hun's had white intakes, so out with the glossy white

Finally when that is drying started work on the pylon food - had to scavange those from a Harrier kit - 4 Snakeeyes and 2 Mk 117's. I've also ordered some MER racks from Flightpath to give the snakeeyes something to hang off. Still lots of work to do on these.

Peter

Post by **pmarshall** » Thu Apr 23, 2015 9:40 pm

Needed to correct the hook, which shouldn't have been straight so went to the shed again while I remembered. Fixed the hook, then decided to carry on and do a bit more. First cleaned up the bombs, and rescribed the panels

Then sprayed the yellow

Masked off the content stripes, then sprayed Olive Drab lightened with a little Buff on the bomb bodies

Then finally sprayed the bomb fins with Olive Drab with a little IJA Green, and sprayed a coat of Gloss Varnish over then ready for a couple of decals and some more weathering

Peter

Post by **rwsmith14** » Fri Apr 24, 2015 12:42 am

Looking Great !!

Overall, How do you like the Kit so far? I have in my stash....
What do you think of the AK Xtreme metal paints ??

Post by **pmarshall** » Fri Apr 24, 2015 3:41 pm

rwsmith14 wrote: Overall, How do you like the Kit so far? I have in my stash....

There's not been any major problems - typical trumpeter with Ejector pin marks in inconvenient places, like it so far.

rwsmith14 wrote: What do you think of the AK Xtreme metal paints ??

Seem to work nicely though they aren't massively different to Alclads - to me it will come down to price and availability.

Today's work - first finishing off the bombs. Started with decals followed by a Dot Filter on the main bomb unit

Then some pigments

Matted down, then added Flightpath PE fuses, and fusing wires

Sprayed the Gear bays with H54 Interiour Green, and fitted the airbrake in place.

Made up the main gear doors, and sprayed them while I had the airbrush out

Finally masked off the canopy rear section, and tacked in place with some Copydex. Masked the side panels of the front section with Parafilm, then sprayed the main section with Alclad Armoured Glass

Peter

Post by **Twokidsnosleep** » Fri Apr 24, 2015 3:47 pm

Wow

Best cockpit I have seen yet, and the bombs are The Bomb too
Great work

Post by **UKguyInUSA** » Fri Apr 24, 2015 3:58 pm

Wow, awesome work so far, she's going to be a killer when done! I've never dot filtered my ordnance, and I don't know why I haven't when I do it to the rest of the aircraft. It made the ordnance look way cool...so, the next ordnance adventure for me will definitely be filtered!

Cheers

Martin

Post by **rwsmith14** » Fri Apr 24, 2015 10:37 pm

THanks for the info..

those Bombs look GREAT with the dot filter, very realistic !!

Post by **pmarshall** » Sat Apr 25, 2015 2:45 pm

Work for today - First sprayed the wheel wells and gear doors with Alclad Aluminium

Then glued the canopy in place - needed some Mr Surfacer 500 to fill a small gap

Added the mount for the refuelling probe, complete with the light masked with Parafilm

Rubbed back the Mr Surfacer, and remasked a couple of places where i'd caught the parafilm on the canopy

Masked off the gear bays with Blu-tak, and tacked the main gear doors in place

Masked the intake with Blu-Tak

Sprayed the canopy black, added the PE wing fences, and masked off the nozzle

Then out with the primer spray can, shake, and apply

This needs to cure now - there's a couple of places that will need touching up but nothing major.

Peter

Post by **pmarshall** » Sun Apr 26, 2015 3:33 pm

Today's work on the Hun

Started by rubbing the primer back with Micromesh, and touching up a couple of places that needed it

Started pre-shading with black along the panel lines

Then along the rivet lines with some grey

Finally breaking up the panels with some Buff, gradually adding more and more white to the mix

Peter

Post by **Steve27** » Wed Apr 29, 2015 1:12 am

I am in total "awe" in how much detail you have in the flight panel and pilot seat. It's pretty rocking!! I'm currently working on a F5 and tried making my own seat belts useing masking tape but it looks awful. Any suggestions?

Post by **pmarshall** » Sat May 02, 2015 10:08 am

This mornings work - basically started early, as I know I will need to leave the hot end a while before masking it off. So this is the rear section of the fuselage.

Start by lining up the Alclads and Tamiya clear paints that will be used for this

So first lay down a nice even coat of Alclad Aluminium as a base

Mask off the Afterburner section, and spray with Dark Aluminium, then very fine Jet Exhaust and finally Burnt Iron. With the Burnt Iron start picking out the centers of the panels where the metal would have got hottest

Then a spray of Hotmetal blue - concentrate on the edges of the hot areas

Build up the effect with Hotmetal Sepia

Then Transparent Smoke

Finally very heavily thinned Tamiya clear orange ( 95% Mr Color Levelling thinner to paint )

This needs to completely cure before I start masking over it. The idea is to have a none uniform looking heated surface - it's close to how I want it, but it's close enough to mask over, as I know later on i've got to spray the 'flaking' cammo colour over the top so there will be more work to do.

Peter

Post by **pmarshall** » Sat May 02, 2015 4:15 pm

Right - more done, started by masking off the metal area

Sprayed the grey

Then the Tan

Then the Mid green

At this point I got a blockage in the nozzle of my Iwata Custom Micron CM-C Plus ( which is only 4 months old ), so for the first time I removed the nozzle - which sheared.

To say that I am annoyed is an understatement - this isn't a cheap airbrush, spares aren't cheap and you need to replace the entire head rather than simply the nozzle. When I looked at it under a magnifier there are cracks all along the threads, so it's definately a manufacturing defect. I've contacted The Airbrush Company who do the Warranty for the airbrush ( and with whom I registered the warranty with ), so we'll see what happens.

I then switched to my old airbrush, and sprayed the dark green

Peter (who's currently livid with Iwata)

Post by **pmarshall** » Sun May 03, 2015 2:40 pm

Today's work - started by unmasking the metal area

Then masked off the area again, and marked where the cammo area would be, ready to start adding in the heat affected cammo.

Start by spraying very heavily thinned Tamiya Buff ( 90% Mr Levelling thinners to 10% paint ), along the areas where there would be framing behind the panels (i.e. the areas that would stay cooler, and therefore the paint is more likely to remain ).

Then spray the Grey ( again 90% thinners ) on the bottom section, gradually covering over the buff and getting some overspray over the metal areas

Next up the Tan - same deal very thin paint, and low pressure building up gradually

Medium Green next

Finally the dark green

Happy with how it turned out, really does look like the paint has been coming off due to the heat. Added the stabilators and the slats

Finally sprayed a coat of Klear over the top of everything

Peter

Post by **Nige201980** » Sun May 03, 2015 8:15 pm

Wow stunning paint work buddy. Sorry about your needle nozzle hope you get it sorted soon.

Post by **martin57** » Sun May 03, 2015 9:25 pm

JUST read all this build and i must say its an exclent build you have done a great job well done

Post by **pmarshall** » Mon May 04, 2015 3:28 pm

Today's work - started by painting up the IFR probe, with some streaks of AK Kerosine

Masked the gun vents with Parafilm, and sprayed with Alclad Steel

Then masked off and resprayed the wheel bays with Interior Green

Making up the Flightpath TER-9's - fiddly but worth it

Blast of Alclad Grey Primer over them to even the metal and resin out

Out with the Dremel, and polished off the Metal landing gear legs - saves painting them

Made the outer pylons - needed to fill the mounting bracket , and cut a new one to allow the TER's to fit

Peter

Post by **shortCummins** » Mon May 04, 2015 7:47 pm

brilliant work so far

rgds
John(shortCummins)

Post by **jbellos1** » Tue May 05, 2015 3:29 am

Wow...I mean...WOW! Superlatives cannot say what should be said about this build. I mean...OMG! Love it! Excellent tale to follow about it as well, thanks.

Ever find resolution with Iwata? That's the brush I am saving up for, so I was interested to hear about the failure.

Really fine build - amazing.

Post by **billlarisa** » Tue May 05, 2015 10:31 pm

Wow!!!!!!!!!! Amazing build,, Amazing Painting Amazing aircraft..Great skills mate..

Post by **peppie** » Wed May 06, 2015 11:50 am

Incredible paintwork sir

Post by **JediBoer** » Wed May 06, 2015 12:42 pm

Mighty fine work there mate!

Post by **pmarshall** » Sat May 09, 2015 4:37 pm

Today's work - started by painting the wheel bays, adding the Eduard Placards, and weathering them down a bit

Then onwards with my "Decal Haters anonymous" homework - using the Eduard stencil templates left over from my Phantom. I really like these as a) I don't like decals and b) they look better. So in true Mr Miyagi fashion -

Mask On:

Mask off

And Repeat until all the No Step and Walkways are done

No decals were halmed at this stage

Then on with the Decals, and a coat of klear over the top

Peter

Post by **Nige201980** » Sat May 09, 2015 5:53 pm

Love those stencils great work all round.

Post by **rwsmith14** » Sat May 09, 2015 7:20 pm

OUTSTANDING !!!!!

Love it !!

Post by **shortCummins** » Sat May 09, 2015 7:48 pm

Peter

can you tell me about the stencil templates? were they part of a kit or did you get them as after market?

by the by they look really, really good

rgds
John(shortCummins)

Post by **pmarshall** » Sat May 09, 2015 9:10 pm

shortCummins wrote:Peter

can you tell me about the stencil templates? were they part of a kit or did you get them as after market?

by the by they look really, really good

rgds
John(shortCummins)

The stencils are the Eduard Stencil set for the Phantom - used em on the 1/32nd Phantom and kept them as you can re-use them easily.

Post by **jbellos1** » Sun May 10, 2015 2:45 am

Totally awesome!

Post by **pmarshall** » Sun May 10, 2015 4:06 pm

Today's work - First the U/C legs, added the sensor and brake lines with 0.3mm solder, then weathered with Oils and pastels to give some wear to the tyres. Also added the Eduard placards to the legs

Finally made up the big tanks - sanding and rescribing

Peter

Post by **pmarshall** » Mon May 11, 2015 12:23 pm

Digging around today hit something of an 'Oh b**gger' moment - the Hun never carried TER's on the outer pylons.It could carry TER's on the inner pylons but not with a full load of Mk 82's.

So the Flightpath TER's will be parked - go for a loadout of 2 Mk 117's on the inner pylons, and 2 mk 82 snakeyes on the Outer pylons - Saves some painting anyway, and I can use them on the F-105D when I get around to that

Peter

Post by **pmarshall** » Sat May 16, 2015 3:49 pm

Today's work - started by assembling the Undercarriage. This is fiddly getting all of the various actuators and rods in place, but does look nice once it's done.

Then started with the pylons and tanks - sprayed the tanks

Finally made the boarding ladder - sprayed with Alclad Aluminium, then Worn Effects, then the Yellow / Orange mix, then rub back with a wet brush, then oil weathering

Peter