Coen's Chicken Walker.

Post Reply
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Coen's Chicken Walker.

Post by Coen »

I've been waiting to start this thing since it arrived about a month ago now.
But I've been holding off for two reasons... one I wanted to buddy build it with Paul... and two, I wanted to wait until the SIG started this month.
Well... I couldn't wait until Paul got his from Ebay... So I just built it.
I have a second one that I want to take more time and try and play with the articulation of the legs a bit and that one I will be buddy building with Paul when we both have the time to do it.

This thing to a grand total of 45 minutes to build. :eeek:
My daughter and I spent the early morning hours building her entry into the SIG and I started this right afterwards.
To say that I was a bit disappointed with the build is an understatement. I was hoping for a bit more complexity and for it to take a little longer.
It just clicks together and requires almost no glue. Just a few tiny pieces needed a touch of TET to hold them. The rest fit like a glove.
That being said, the fit and the ease of build is superb. Better than Tamiya any day, and priced so everyone can buy and build one.
Genius!!!

The plan is to have this one and the second one together on a diorama of Tatooine chasing a pair of Wookies across the desert. (only because I have the wookies. Why waste a good Wookie I say :th: )

[youtube]nhQg2xIQsX4[/youtube]

So here are the shots of the parts...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


And now the build...

The torso

Image

Image

Legs... A bit obvious I know...

Image

Clicked together with the neck added. The detail is freaking superb on this thing.

Image

Image

The head was a bit tricky to build, mostly because I was trying to see if I could get it apart later to paint...

Image

Image

And built with Wookie ... :) The Wookie figure isn't too bad but the two Imperial Drivers are really crappy figures.
I won't be gluing mine in place as I'm hoping that one day in the future someone will do resin ones or something.

Image

Image

Image

Image

Image

Image

Image

Image

Image

That's it for now... It's built. And no masking tape!!!!!

Next is the paint.
I'll be waiting until Paul gets his chicken walker and I can start the second one before I get some paint on them.
I have my falcon to keep me busy until then.

User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: Coen's Chicken Walker.

Post by Lee »

That cockpit looks like it has loads of detail :)
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
Hawkins6685
Sergeant
Sergeant
Posts: 114
Joined: Wed Apr 01, 2015 1:24 am

Re: Coen's Chicken Walker.

Post by Hawkins6685 »

Really nice looking bud. Can't wait to see it painted and weathered. :thumb1:
On the bench
Airfix 1/78 messerschmitt bf109e-4/n trop, eduard neumann North Africa 1941
Revell 1/78 Lockheed f22 raptor
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Re: Coen's Chicken Walker.

Post by Kingdan »

Awesome Mike :banana: :banana: :banana:
User avatar
fly1ngdutchm4n
First Lieutenant
First Lieutenant
Posts: 3554
Joined: Fri Aug 09, 2013 11:17 pm
Location: Hoogerheide The Netherlands
Netherlands

Re: Coen's Chicken Walker.

Post by fly1ngdutchm4n »

Love it!
Makes me want to do Sci-fi again...
Maybe my with dust covered enterprise :think:
Build what you love, Love what you build
User avatar
dave843
Sergeant
Sergeant
Posts: 157
Joined: Tue Jul 22, 2014 9:54 pm
Location: Bath, Somerset, UK
Great Britain

Re: Coen's Chicken Walker.

Post by dave843 »

You're Chewie has died!! :eeek: :crazy:
Dave M
On The Bench: Airfix Mini Countryman WRC (1:32); Airfix Volkswagen Beetle (1:32); Airfix RAF Red Arrows Hawk (1:72).
Completed Builds: viewtopic.php?f=69&t=11582 :banana:
User avatar
kiwigav
Warrant Officer
Warrant Officer
Posts: 1425
Joined: Tue Oct 01, 2013 8:38 am
Location: Nelson - New Zealand
New Zealand

Re: Coen's Chicken Walker.

Post by kiwigav »

nice quick build Mike :th:
Mine is probably going to progress a little slower. Like the chase scene idea :th:
Cheers Gav

On The Bench OK where do I start :wtf:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

I will take a little longer with the next one Gav. I want to damage them both up a bit and I'm thinking of adding some stowage. :eeek:
User avatar
Nige201980
Captain
Captain
Posts: 4095
Joined: Wed Jun 05, 2013 9:30 am
Location: Doncaster South Yorkshire UK
Contact:

Re: Coen's Chicken Walker.

Post by Nige201980 »

Quick work Mike love it.
http://www.youtube.com/channel/UCy-TGcs5u_ZXSZ9kObNfsPg


On the go at the Mo

Quite a few :banana:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

Paul and I both started out walkers today, as expected, very fast builds.
Not as fast at the first one, but just as enjoyable.
Again a supreme kit to be sure.

About three hours work this time. Near the same for Paul I think.
I will mock up the dio next then start the painting.


Image

Image

Image

Image


User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

Non-stop work today it seems.
Both walkers are built and now the dio base is built and ready for paint. I've also primed the walkers.
As part of the scene I scratchy kinda built from spare parts a weapon that the wookies are planning to use against the walkers.

Firstly... The Wookie weapon thingy

Image

Image

Image

Image

Then I primed the walkers and painted the cockpits.

Image

Image

Image


Next I'll paint the interior a bit more as well as the figure, then I'll prime the dio and start on that.
User avatar
kiwigav
Warrant Officer
Warrant Officer
Posts: 1425
Joined: Tue Oct 01, 2013 8:38 am
Location: Nelson - New Zealand
New Zealand

Re: Coen's Chicken Walker.

Post by kiwigav »

Superb work mike
looking forward to seeing base finished
:th:
Cheers Gav

On The Bench OK where do I start :wtf:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

Thanks Gav.
It's nearly done now
Im thinking of adding some vegetation.


Das on wood with a side of rocks and sand, coated in a lovely bath of watered down PVA.

Image


Pour apre, a dusting of Vallejo air hemp and light earth, then some dark earth. Followed by a brushing of sand coloured pigments ala crushed pastel chalks.

Image



Then some hairspray to hold it all together.

Image

Image



The ATSTs also got a base coat of dunklegelb.
Later I'll fade and hilight the panels then do the detail painting.

Image

Image

Image


User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

Decals! And details!

First some paint fading....

Image

Image

Image


Then on goes the decals and the little detail painting that there is.

Image

Image

Image

Image

Image

Image






User avatar
kiwigav
Warrant Officer
Warrant Officer
Posts: 1425
Joined: Tue Oct 01, 2013 8:38 am
Location: Nelson - New Zealand
New Zealand

Re: Coen's Chicken Walker.

Post by kiwigav »

:jd: Outstanding Mike .....very cool looking Chickens :th:
Cheers Gav

On The Bench OK where do I start :wtf:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

The last bit of work done now.

Some chipping, dot filter, and rust streaks added. Then the oil and grease stains.
Finally everything is installed on the diorama and pigments are added to blend them in.
Then ... Done :)


Chipping...
Life Colour Anthracite

Image

Image

Image

Then Dot Filter and Rust Streaks...

Image

Image

Image

Image

Installation of the ATSTs on the dio

Image

Image

Wookies are done

Image



Finally... It's finished. More in the reveal thread... http://www.intscalemodeller.com/viewtop ... 86&t=13468

Image





User avatar
kiwigav
Warrant Officer
Warrant Officer
Posts: 1425
Joined: Tue Oct 01, 2013 8:38 am
Location: Nelson - New Zealand
New Zealand

Re: Coen's Chicken Walker.

Post by kiwigav »

Very Awesome Dude. like it alot!! :jd: :banana: :th:
Cool running Wookie
Cheers Gav

On The Bench OK where do I start :wtf:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Coen's Chicken Walker.

Post by Coen »

Thanks Gav :)
Post Reply

Return to “Builds”