Lets see your modelling work areas

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
Lysion
Sergeant
Sergeant
Posts: 136
Joined: Sun Jul 07, 2013 10:32 am
Location: Sweden

Re: My improvised mini man cave/corner/coffee table thingy

Post by Lysion »

Mcleod, looks nice but perhaps a little low for longer building sessions. I use my pc desk as build station, and you are right it is not good because you have to clean the desk free from gadgets before building. And then clean the desk of model-building stuff after building and install your gadgets again. But since I have no other option at the moment, it will do.

Do you always have such a clean work area, or just cleaned and arranged it for the picture? :ugeek:
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: My improvised mini man cave/corner/coffee table thingy

Post by McLeod »

I just sorted it out today, preparation for my first build since about 2000, so that's why it looks so clean and tidy, a new cutting mat too so that helps it look clean lol.
I've got a improvised beanbag to sit on, actually helps posture because I have to sit properly to be comfortable.
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Maketci
Corporal
Corporal
Posts: 93
Joined: Mon Jul 29, 2013 7:53 pm
Location: Istanbul/TURKEY

Re: Lets see your modelling work areas

Post by Maketci »

Thanks guys :pop:

Regards,
Maketci.
Also I member of The Modelling Man Cave http://z9.invisionfree.com/Classic_Brit ... /index.php
User avatar
wappynutter
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2256
Joined: Mon Jun 17, 2013 11:39 pm
Location: Sutton in Ashfield, Nottinghamshire. UK
Great Britain

Re: Lets see your modelling work areas

Post by wappynutter »

Here it is guys my super work area....... :eeek:
Image

and of course with the added lighting ... :lol:
Image

* please note the modelling refreshment*
Strongbow Dark fruits.
If any of you haven't tried this *Pop* then you need to ASAP... :cheers2:
Regards Andy...Image
YouTube Channel..... http://www.youtube.com/channel/UCRdZFBjr6oO-T-2ydSB4HIg
User avatar
Scruffy
Sergeant
Sergeant
Posts: 139
Joined: Sun Jul 14, 2013 5:37 pm
Location: New Hampshire
United States of America

Re: Lets see your modelling work areas

Post by Scruffy »

Here is mine, fairly simple which is good, since some of my builds seem to be over complicated :wall:. It dose the job though and I like it :thumb2:

Image
Image
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

Is that a piece of marble tile?
User avatar
Scruffy
Sergeant
Sergeant
Posts: 139
Joined: Sun Jul 14, 2013 5:37 pm
Location: New Hampshire
United States of America

Re: Lets see your modelling work areas

Post by Scruffy »

Coen wrote:Is that a piece of marble tile?
Yes it is, just on off cut piece I picked up. I use it when I soldier and also when putting assemblies together as it is flat and true, helps make sure all the wheels are touching the ground etc.
Image
User avatar
Lysion
Sergeant
Sergeant
Posts: 136
Joined: Sun Jul 07, 2013 10:32 am
Location: Sweden

Re: Lets see your modelling work areas

Post by Lysion »

Scruffy wrote:Here is mine, fairly simple which is good, since some of my builds seem to be over complicated :wall:. It dose the job though and I like it :thumb2:
Really nice! :thumb2: You need more shelves tho ;)
User avatar
Scruffy
Sergeant
Sergeant
Posts: 139
Joined: Sun Jul 14, 2013 5:37 pm
Location: New Hampshire
United States of America

Re: Lets see your modelling work areas

Post by Scruffy »

Lysion wrote:
Scruffy wrote:Here is mine, fairly simple which is good, since some of my builds seem to be over complicated :wall:. It dose the job though and I like it :thumb2:
Really nice! :thumb2: You need more shelves tho ;)
I know, but I hesitate to build a bigger paint rack as the end of the table is against one wall and the front of the table (where the paint rack is) is aginst another and the white walls help reflect what light I have, I really need to add more lighting though.
Image
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

Cool idea with that tile, the simplest things sometimes make the best tools.
I like that paint shelf too. I wouldn't mind having something like that for all my paints.
Mine are so disorganized.
User avatar
Scruffy
Sergeant
Sergeant
Posts: 139
Joined: Sun Jul 14, 2013 5:37 pm
Location: New Hampshire
United States of America

Re: Lets see your modelling work areas

Post by Scruffy »

Coen wrote:Cool idea with that tile, the simplest things sometimes make the best tools.
I like that paint shelf too. I wouldn't mind having something like that for all my paints.
Mine are so disorganized.

Mine are too!!! I can't fit them all on the shelf :wall: I made that paint rack, Home Depot has these strips of Ash, 1/4"" thick, and about 2" wide. I cut the dividers between the shelves based on the height of several different paint bottles and put it together with wood glue and brads. Only took probably no more than an hour and a half.
Image
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

I may have to take a trip over to Home depot this weekend and see what I find.
Cool, thanks.
User avatar
Scruffy
Sergeant
Sergeant
Posts: 139
Joined: Sun Jul 14, 2013 5:37 pm
Location: New Hampshire
United States of America

Re: Lets see your modelling work areas

Post by Scruffy »

Coen wrote:I may have to take a trip over to Home depot this weekend and see what I find.
Cool, thanks.
:thumb2:
Image
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

I wish we had a home depot type place over here.
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol :banana:
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Lets see your modelling work areas

Post by Gav0909 »

Paul wrote:
McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol :banana:
You tell him Paul!

The issue I have with being able to make things like that is the desk I have. Its a PC desk, which is quite good for modelling, until a certain point. And I have reached the space limitations of it now.
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

Gav0909 wrote:
Paul wrote:
McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol :banana:
You tell him Paul!

The issue I have with being able to make things like that is the desk I have. Its a PC desk, which is quite good for modelling, until a certain point. And I have reached the space limitations of it now.
If I were to make a modelling workspace I would do it just as I have it in my workshop, go to wickes and for less than £80would get you 2m kitchen work top and two kitchen drawer units, I know it s £80 but a decent pc desk can cost that and won't last half as long
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

Paul wrote:
McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol :banana:
Home depot seem to do loads of stuff more tailored to the hobbyist though.

if I go into a B&Q near me for a craft knife they try and sell me a kitchen lol
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

McLeod wrote:
Paul wrote:
McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol :banana:
Home depot seem to do loads of stuff more tailored to the hobbyist though.

if I go into a B&Q near me for a craft knife they try and sell me a kitchen lol
Have you been in shops called "the range" there quite good too.
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

Not yet, just checked and there is one in Canterbury, which is fairly close, will check it out at some point.
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
5Craven
Sergeant Major
Sergeant Major
Posts: 652
Joined: Sun May 26, 2013 6:51 pm
Location: Weymouth, Dorset, UK

Re: Lets see your modelling work areas

Post by 5Craven »

I have recently relocated my work area as how we have the house organised is still changing after we moved in just over a year ago. As you can see I am still sorting it out whilst trying to get my group build finished for the looming deadline. The Microwings build is being done by my daughter who has been inspired by the 'Medieval Cottage' scratch-build she did for school.

Image
On the Bench

1/48 Revell SH-60B Seahawk (on hold)
1/72 Matchbox Supermarine Walrus II (Decalling)
1/48 Hasegawa Idolm@ster F-16C (Decals complete)
1/35 Hobbyboss ZSL-92 IFV (Building)
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

Great stuff, nice to see your daughter involved too :thumb2:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

Most awesome.
I can only hope that I can inspire my two little ones to hobby up.
My oldest gave it a whirl but girls and beer......
Maybe he'll come back.
It's so rewarding to be able to share like that with your kids Dude.
I'm envious.
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Lets see your modelling work areas

Post by Gav0909 »

My gf painted part of a Harrier pink last night.....

Looks like a good wee area you have there mate.
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

Pink?
Oh dear.
Was it the dog, bird, or the plane?
If it was the former... I think you have a lot of cleaning and explaining to do to someone.
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

Here's my little island of sanity in the shed after years of destroying my room's floor with paint and glue its one of the rare photos of it tidy :p

Image[/URL]
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

You know... I think that we keep Lazy Susan in business. I see so many of them one our benches.
Nice pipe Shane.
I used to smoke one years ago but I quite smoking so its a decoration now.
Excellent work space... it looks very well loved and used.
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

thanks coen, got a small collection of pipes, tend to get a lot of funny looks on the street when people see me smoking it but i enjoy it funny though i don't smoke cigarettes
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

mmmm pipes, that brings back some memories, I used to love Clan Aromatic tobacco, thinking about ditching ciggies and going to a pipe again, so much more civilised :cheers2:
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

I've always hated the smell of cigarettes and I hate the sight of all the butts on the ground.:pistols:
Since I quit I've become a bit of a that geezer from down the road about out sometimes. :bash:
I've always loved the smell of a good pipe though. That's why I smoked one I guess.
People give me funny looks cause I'm ugly and my mum dresses me funny. :lol:
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

McLeod - funny you should mention Clan its my pack of choice its the nicest smoke of the tobaccos I have available here, tried condor too but always found it very rough and after a while of smoking it you'd almost have a smoke screen made ahaha

Coen - Im well used to the funny looks from being the "that group" in school, the hairy guys dressed in black, chains and listen to metal, though my metal head days are behind me, I find the pipe still brings the character without having dress head to toe in black ;)
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: Lets see your modelling work areas

Post by Lee »

I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban :D
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

Lee wrote:I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban :D
Used to buy my old man those mate, quality cigar and not too expensive either. I used to hate the smell of cigars i used to stink of stale cigar smoke everyday working with him, lost him to cancer 4 years ago and love the smell when i catch it in the air now.

Weird thing is every now and then when im alone and i know for a fact no-one is around, i get a unmistakably faint smell of cigars around me.......
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

most I can afford cigar wise are Hamlets hahaha
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
alextheblue
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2679
Joined: Mon Jul 15, 2013 11:30 am
Location: Slough, United Kingdom
Contact:
Scotland

Re: Lets see your modelling work areas

Post by alextheblue »

Paul wrote:
Lee wrote:I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban :D
Used to buy my old man those mate, quality cigar and not too expensive either. I used to hate the smell of cigars i used to stink of stale cigar smoke everyday working with him, lost him to cancer 4 years ago and love the smell when i catch it in the air now.

Weird thing is every now and then when im alone and i know for a fact no-one is around, i get a unmistakably faint smell of cigars around me.......
I hear what you're saying Paul. Lost my mum recently and swear blind I can smell her perfume at times. Our sense of smell is our strongest cognitive sense to the point when we are born we recognise our mothers by her smell apparently.
"Courage is feeling fear and acting anyway."

www.alextheblue.com
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

longlance67 wrote:McLeod - funny you should mention Clan its my pack of choice its the nicest smoke of the tobaccos I have available here, tried condor too but always found it very rough and after a while of smoking it you'd almost have a smoke screen made ahaha
Yeah its weird I tried loads of different baccy's, used to order taster packs online where you'd get a variety of different little samples, some of them were realy good, but I always went back to Clan, I think its becasue I grew up around it so the smell was imprinted on my brain lol
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

it does have a lovely air to it, and also i found when out in the countryside with mates it keeps the miggies away ;)
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

The only reason that I even smoked my pipe is because it was my Grandfather's.
He was my best friend and personal hero when I was a kid, and I wouldn't be who I am today if it weren't for him.
So the smell of pipe smoke... Irish Mead is what he smoked or Sail once in a while, is very special to me.
I can understand your sudden fondness of cigar smoke Paul, and your Mum's perfume clinging to you Alex.

It's also good for keeping the miggies away like the man said. haha.
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

Coen - that is very touching about your grandfather, I think often we owe a great deal to our family members for becoming the people we are now, speaking of family keep safes I was recently given an old pipe rack by my uncle (the person who got me into the hobby) with an array of very old pipes that he collected over the years and one that belonged to my great grandfather :)

I dont dare to smoke from it
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
NovYank
Sergeant First Class
Sergeant First Class
Posts: 331
Joined: Sun Jun 09, 2013 5:40 pm
Location: New York

Re: Lets see your modelling work areas

Post by NovYank »

Hate to be a party pooper but...

Hope someone gets the reference.
You do not have the required permissions to view the files attached to this post.
Proper Preparation Prevents Poor Performance
User avatar
SiDennis
Sergeant
Sergeant
Posts: 118
Joined: Sat Aug 17, 2013 11:56 am
Location: Telford, Shropshire
Great Britain

Re: Lets see your modelling work areas

Post by SiDennis »

Here is my modest man cave, I live in forces accommodation, so am lucky enough to have a garage . This is my small piece of heaven!!
Image
Image
Simon
User avatar
T3hGuppy
Second Lieutenant
Second Lieutenant
Posts: 3467
Joined: Wed Jun 12, 2013 11:20 pm
Location: Bournemouth, UK
Contact:
Great Britain

Re: Lets see your modelling work areas

Post by T3hGuppy »

Nice space you've got their.
On the bench

Too much to list. !!


Youtube channel:https://www.youtube.com/user/bnealuk
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Lets see your modelling work areas

Post by Paul »

Yeah nice tidy work area, thanks for sharing
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

So clean!
My eyes.... They ca't take it... Ahhh

Sweet work area dude, it's so organised.
longlance67
Warrant Officer
Warrant Officer
Posts: 1371
Joined: Fri Aug 16, 2013 5:22 pm
Location: Galway, Ireland

Re: Lets see your modelling work areas

Post by longlance67 »

really neat and shinny !


cool workspace :)


Shane.
On the Bench:
Trumpeter Stryker ESV
Hobby Boss 1/48 F18 Hornet
1/72 Dragon King Tiger with Zimm
28mm Napoleonic project
28mm Norman Conquest of Ireland painting project

My Channel:
http://www.youtube.com/user/longlance67
User avatar
coladito1
First Sergeant
First Sergeant
Posts: 517
Joined: Sat May 25, 2013 4:22 am
Location: Palmdale, CA. USA.

Re: Lets see your modelling work areas

Post by coladito1 »

now that is one nice and clean area!! :clap: :clap:
Luis Toledo.
User avatar
SiDennis
Sergeant
Sergeant
Posts: 118
Joined: Sat Aug 17, 2013 11:56 am
Location: Telford, Shropshire
Great Britain

Re: Lets see your modelling work areas

Post by SiDennis »

She who must be obeyed ordered me to tidy up the garage :scratch::
It's not normally that clean and tidy.
Simon
User avatar
NorthernSwede
Sergeant First Class
Sergeant First Class
Posts: 296
Joined: Mon Jul 22, 2013 8:26 am
Location: Sweden

Re: Lets see your modelling work areas

Post by NorthernSwede »

Well here is my retreat from the world.

First area is really for heavier stuff than a model but sometimes it´s nice to just stand up and build a little while.

Image

Second is where i´ll be painting and weathering etc.

Image

And last is where i´m building the stuff

Image

Everything is not finished yet, i´m missing shelves for paint and more toolholders on my building desk but it´s getting there.
On the Bench

1:35 Trumpeter T-64A : Stage - Build
1:35 Academy M1A2 Abrams TUSK II : Stage - Starting Soon

My Youtube Channel
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Lets see your modelling work areas

Post by McLeod »

Impressive looking man cave you got there - the A-Team could drive a car in there and then drive a tank out lol :th:
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Lets see your modelling work areas

Post by Coen »

Hahahahahahahaaaa

Good one !!!!
Post Reply

Return to “Modelling Chat”