Bugatti Type 35 1/20 Revival

YouTube · Post by **Kingdan** » Sun Feb 07, 2016 4:21 pm

Wow Scott dude your going all out on this one loving all the little touches I'll be watching this one closely

Dan

Post by **wappynutter** » Sun Feb 07, 2016 4:37 pm

Twokidsnosleep wrote:
wappynutter wrote: WOW dude!....

Awesome stuff so far, love the reworked hubs and discs. All these various skills required to build a model kit eh?
When you starting on the Garage front dio ? lol..
Continued success Scott..

Hi Andy
This is the most challenging model I have ever built. It has kicked my but something seriously
I cannot count my chickens yet and start thinking diorama yet, but I do like those images in front of the garage
Thanks for taking the time to stop in, I really need the motivation

Well i think you have done a fantastic job taming the build and showing it who's boss mate..

Looking forward to the next update...
All the best bud..

Post by **Twokidsnosleep** » Mon Feb 08, 2016 5:20 pm

Making parts...at 4:20 in the AM, little bit of insomnia I suppose so just got up and did something
This is the starter crank
Brass and aluminum tubes bent to match the kit part.

Then painted up

Post by **Twokidsnosleep** » Tue Feb 09, 2016 9:22 pm

Thanks Dan and Andy
My two favourite supporters

This kit is a complete B, but we are getting along and I am dealing with her temperamental nature

Post by **planemaker** » Wed Feb 10, 2016 6:37 pm

Awesome work Scott. Looks like this will become something great. Love these old racing cars.
There was a guy on the finnish modelling forum Pienoismallit.net who scratchbuilt a Bugatti 35 in 1/6 scale!

Check it out, you might find some inspiration. http://www.pienoismallit.net/galleria/malli_13031/
Good luck with the build!

PS: I know you might ask, I will join this group build with something too... hmmm...

Post by **Twokidsnosleep** » Wed Feb 10, 2016 7:02 pm

Hi Sebastian,
Thanks for looking in and the kind comments.
I think I would have trashed this kit at the start if I didn't have some weird love for this era of open wheeled racing cars.
I have seen that 1/6 build on another site and may have talked with the builder...he is amazingly skilled
Looking forward to see what you come up with project wise for the GB

Scott

Post by **pg265** » Wed Feb 10, 2016 8:45 pm

Hi,

Grreeeaaat build!
I love the car and need this kit!
Can't wait to see more.

Pascal

Post by **Twokidsnosleep** » Wed Feb 10, 2016 9:13 pm

pg265 wrote:Hi,

Grreeeaaat build!
I love the car and need this kit!
Can't wait to see more.

Pascal

Hey Pascal,
If I were you, I would save up and buy a MFH kit....that Japanese engineering and attention to detail is better than the Revival
kit's. The Bugatti kits are a rare bird that I love however, so I jumped at the chance to buy one.

Post by **Twokidsnosleep** » Thu Feb 11, 2016 4:58 am

Off sick today, nothing accomplished
Test fitting body, seat and front grill. I will shorten the engine crank as we get to the final buildup...better long than short they say

I was planning on covering the seat in black leather, but it is a rubbery material and my glues won't hold during testing.
I actually like the look and feel so will use seat as is.
Feeling groovy

Post by **TheTroyster** » Fri Feb 12, 2016 2:10 am

Geez Scott I didn't even know this car brand had been around longer than five years. I guess you like cars cause this is looking epic!

Post by **Twokidsnosleep** » Fri Feb 12, 2016 4:37 am

TheTroyster wrote:Geez Scott I didn't even know this car brand had been around longer than five years. I guess you like cars cause this is looking epic!

Thanks bud

This is a car that haunts me since my childhood. I built a Monogram or something like that and never forgot it.
For some reason I just love these open wheel racers of this era

Post by **Twokidsnosleep** » Thu Feb 18, 2016 9:39 pm

Re-doing the copper on the firewall...going less shiny this time, more burnished like the floor pan

Post by **pg265** » Thu Feb 18, 2016 10:21 pm

Hi,

Stunning!!

Pascal

Post by **wappynutter** » Thu Feb 18, 2016 10:32 pm

Fantastic bit of copper working Scott.. Your putting your heart and soul into this little beauty..

Continued success mate... I'm still slacking here but i have built a couple of trees.. lol..
All the best bud.

Post by **Twokidsnosleep** » Thu Feb 18, 2016 11:36 pm

Thanks guys

I love working with copper, it is a beautiful material that is malleable, polishable and just gorgeous when finished.
Just not extremely strong, so you have to be careful with it.
Pondering doing the dashboard with a copper overlay as well...we shall see

Post by **MikeyKb** » Fri Feb 19, 2016 2:05 am

DUDE - WTF?!?! I JUST FOUND THIS THREAD! YOU'RE INSANE!

that's quite an epic build, buddy! I can't believe you decided to just thread your own tubing LOL
you found that stuff at a LHS?! which one?

I have a couple car kits that you're inspiring me to take a look at....
I haven't built a car kit for 25 years

I'm just gonna sit here with

and watch you work

Hope no more unwanted visitors!

Post by **Homerlovesbeer** » Fri Feb 19, 2016 4:06 am

Fabulous work Scott....just amazing! The copper looks fantastic

Post by **Twokidsnosleep** » Fri Feb 19, 2016 6:31 am

Hey thanks guys, it isn't that big of a deal....bit of thin copper from the garden store and some thick CA glue
So, do I cover the dash with copper, redo all the rivets and make new bezels for the dials
Ya, probably

Post by **TheSmoo** » Sat Feb 20, 2016 9:53 am

loving the metal bashing and scratch building, looking fab

YouTube · Post by **Skullfish** » Sat Feb 20, 2016 1:31 pm

Dude, thats a great build. your showing some great skills and a great amount of determination.
Jase

Post by **Twokidsnosleep** » Sat Feb 20, 2016 3:27 pm

Thank you kind gentlemen, very kind words

"Metal Bashing Determination" is my new motto for this build as that is exactly what it takes to put this beast together
I hope I can make something out of it, and find some time to do it

Post by **Twokidsnosleep** » Mon Feb 22, 2016 2:04 am

K, this kit just kills me, it is freaking hilarious
Photo of instructions step 5

I am not really there, but I am painting the spark plug side of the engine block and wanted to see the wiring. Good reference photo here of what I am trying to replicate

This era of cars often had braided fabric leads usual white with a black, yellow or red striated pattern running through. So I go looking in the kit and find.....solid brass wire of very thin guage. Ok no worries, I will use tubing and make it ok. I take the metal tube that is the support harness for the wires and it freaking bends like a soggy noodle in my fingers!!!! It isn't even made the same as the diagram where the most distal wire comes out the end. Unreal. If I bend it back it will snap, called work hardening metal.

So now I will make an aluminum harness pipe with seven holes and one coming out the flipping end and a copper connector to mate with my copper fire wall

Look at that limp noodle harness pipe, what a joke
A smarter man would throw this kit in the fire

Post by **Lysus** » Mon Feb 22, 2016 5:52 pm

Twokidsnosleep wrote: Look at that limp noodle harness pipe, what a joke
A smarter man would throw this kit in the fire

Considering the fight it's put up so far I'd wager it would burn your house down and that pipe would still be wonky. I bet it will look amazing once you're done, keep at it!

Post by **Twokidsnosleep** » Wed Feb 24, 2016 11:30 am

Working on some more parts:
The tubular wiring harness with 8 wires
the interior radiator grill...was shown on instructions but not supplied mesh in the kit
RHS cooling hose to the upper radiator
The kit parts are either not present or of a very basic nature so need to be upgraded

I left everything longer than needed so I can adjust at final assembly

Post by **wappynutter** » Wed Feb 24, 2016 5:34 pm

Still enjoying watching you build this fantastic kit Scott...

You make it look easy though I'm guessing it's not.
Love all the extra detail and all the reworked brass and kit parts... Your making it shine dude!..

Continued success mate..

Post by **Twokidsnosleep** » Wed Feb 24, 2016 5:44 pm

Thank you kind sir
Someday I might actually have a completed part to show rather than bits and pieces.....it is a different way for me to build with all this test fitting, but it should pay off with easier re-assembly and lower frustration
It sure ain't a Tamiya
I think I will disappear from posting for a bit and plug away at the engine block
Have a good one

Post by **pg265** » Wed Feb 24, 2016 10:38 pm

Hi,

Beautiful!
Great progress!!

Pascal

Post by **Twokidsnosleep** » Wed Feb 24, 2016 11:17 pm

pg265 wrote:Hi,

Beautiful!
Great progress!!

Pascal

Thank you so much Pascal
I am still envious of all those beautiful hoses and attachments on your Ferrari...your stuff is stunning my friend

YouTube · Post by **Kingdan** » Thu Feb 25, 2016 12:18 am

Yep love the determination not liking that you have to keep fixing everything before you can go forward that said your doing a belting job mate top marks

Dan

Post by **Twokidsnosleep** » Thu Feb 25, 2016 12:48 am

Thanks Dan, I am trying
Try to get the block more assembled so I am not showing ratty piecemeal pictures

Post by **Twokidsnosleep** » Sat Feb 27, 2016 6:37 pm

Some beautiful,art work (not mine) to entertain whilst I am wrestling engine details

Post by **Lysus** » Sun Feb 28, 2016 5:36 pm

Twokidsnosleep wrote:Some beautiful,art work (not mine) to entertain whilst I am wrestling engine details

Post by **Twokidsnosleep** » Mon Feb 29, 2016 12:44 am

Ya, it is a beautiful bit of art work
I am making this fuel line

Took about eight tries to silver solder the brass tube 'T', but I eventually got it. Fuel line is a metal thread

Setting up and soldered

Finally got it together, testing for size and alignment

Trimmed and test fitting

This took all my morning modelling time

Post by **wappynutter** » Mon Feb 29, 2016 12:15 pm

WOW!!

I'm guessing this thing will actually run by the time you finished Scott?? lol..

The attention to the details is just "out of this world!" dude..
All the best....

" munch... munch... munch...!"
Just gonna camp out here eating popcorn and wait for the next amazing update..

YouTube · Post by **Kingdan** » Mon Feb 29, 2016 7:18 pm

awesome work dude makes mine look like a trd

really nice work Scott

Dan

Post by **Lysus** » Mon Feb 29, 2016 7:23 pm

Kingdan wrote: awesome work dude makes mine look like a trd really nice work Scott

Dan

Not all trd is bad:

Post by **pg265** » Mon Feb 29, 2016 11:29 pm

Hi,

Beautiful job!
Well done!

Pascal

Post by **Twokidsnosleep** » Wed Mar 02, 2016 1:24 am

Thanks to all four of you gentlemen

I have started the tear down and am working on the painting and detailing as it goes back together
Just a quick pic to see her undressed

, my rambling drawing of engine details and the rear knock off hubs screwed on...I like those

Thanks for all the support guys, will get the photo booth cleaned out and do some better pics as the details roll along

Post by **Twokidsnosleep** » Wed Mar 02, 2016 3:54 pm

Fitting an engine stand to avoid painting

Post by **pg265** » Wed Mar 02, 2016 4:10 pm

Hi,

Waow!
Cool!!
I really like the stand for the engine: well done!

Pascal

Post by **Twokidsnosleep** » Wed Mar 02, 2016 4:18 pm

pg265 wrote:Hi,

Waow!
Cool!!
I really like the stand for the engine: well done!

Pascal

Thanks Pascal

Now I have to get it either soldered or bolted together...or a bit of both
And some feet, it needs some feet. I might display the car with the engine out

Post by **Twokidsnosleep** » Fri Mar 04, 2016 6:37 am

Thursday night soldering. Making the L bracket that attaches to rear engine mount.
Made a rivet out of the brass rod and pinned the two parts together with it, then soldered it all

YouTube · Post by **Kingdan** » Fri Mar 04, 2016 8:37 am

That's not cool at all dude

that's going to look awesome can't wait for the finished look nice work Scott

Dan

Post by **wappynutter** » Fri Mar 04, 2016 3:29 pm

Next you'll be building a "Working" Mig welder and little goggles.. lol..

Maybe a full wiring loom?? Just stoking the imagination for ya here Scott!.. lol.
This is just too awesome, soldering skills are spot on for such scale. Any welding next service i'm bringing my car round to yours..
At least i'd get an " in person" look at some of your builds..

Continued success mate..

Post by **Twokidsnosleep** » Fri Mar 04, 2016 3:58 pm

Thanks to my two English mates

Doing this is relatively simple and need not be expensive. More complicated multipart soldering gets interesting.
I forgot to bring the parts out to work this morning, so sand blast clean up will have to be on weekend
I think blasting the brass will leave a cool textured surface and eliminate the black and copper colours that come with heat soldering...with less sanding

Post by **pg265** » Sat Mar 05, 2016 11:37 pm

Hi,

Top Job!!
Welding session for me too yesterday

Pascal

Post by **Twokidsnosleep** » Sun Mar 06, 2016 12:52 am

pg265 wrote:Hi,

Top Job!!
Welding session for me too yesterday

Pascal

Hi Pascal
If you are doing it , then you know how easy and hard soldering can be all in the same breath
One time I am a star and everything goes together first try, others it is many tries
The little brass "T" for the fuel line was EIGHT tries before I got it correct

Hoping for some solder time tonight for the engine stand

Post by **PrivateMansoor** » Sun Mar 06, 2016 10:39 am

Coming along nicely twokids!

Post by **Twokidsnosleep** » Sun Mar 06, 2016 3:01 pm

PrivateMansoor wrote:Coming along nicely twokids!

Thank you my friend

Post by **Twokidsnosleep** » Mon Mar 07, 2016 5:26 am

Couple of hours of model time Sunday, otherwise busy with house and office.
Got the engine stand cross supports soldered and then the box pinned and relatively squared up, ready for soldering.

Sad that was my whole weekend of modelling