Weekend Goals and Accomplishments

Post by **Twokidsnosleep** » Fri Apr 15, 2016 11:22 pm

flundstrom2 wrote:Friday! Just got home from AW, but hey - I've got the whole weekend left! Unfortunately hockey finals season is here. Skellefteå AIK made it to the finals for the 6th consecutive year - quite impressive! Anyway, hockey tomorrow and Sunday, but I guess I'll get some time for modelling anyway:

* Total exterior paint of a cheap stunt double scrap model (Hawker Sea Fury T-20) for paint practice.
* External priming the next stunt double (a Boulton Paul Defiant NF. 1) for the same purpose. But I really intend to finish this one.

None of my Canadian teams are in Stanley Cup run so no watching for me
I forgot, we are going to Paul McCartney concert next week...going to be up past my bedtime

Post by **Jagdpanzer** » Sat Apr 16, 2016 8:17 am

I plan to get my modelling work area properly tidied today. Saps my mojo when the place is upside down!

Hope to start a kit tomorrow once the place is in order. (251 or a Puma)

New (to me) car yesterday so I want to get a proper drive in it to make sure all is as it should be.

Post by **Avgas** » Sat Apr 16, 2016 8:20 am

Got snow here this morning! Roads aren't too bad though.

Can't beat the good old English weather, it was 17C and sunshine here on Thursday, it's 2C at the moment.

Post by **Stokesy44** » Sat Apr 16, 2016 9:40 am

Avgas wrote:Got snow here this morning! Roads aren't too bad though.

Can't beat the good old English weather, it was 17C and sunshine here on Thursday, it's 2C at the moment.

If we're not talking about the weather we're not Englishmen!

Had a contractor here yesterday working in the bathroom. He was here all day so I turned down the heating (massive rad in the bathroom, didn't want to cook him), got up this morning - bloody cold

Get the coffee on!!!!!!!!!!!!!1

Post by **Jagdpanzer** » Sat Apr 16, 2016 10:28 am

Just back from watching my boy play football. Heavy frost on car and bloody cold standing about for an hour!

Post by **Smiffy** » Sat Apr 16, 2016 10:35 am

First weekend goal achieved, get Dad out from under Mum's feet and get him drunk, check. Next goal is to get the Stug to a stage where its ready to be primed. Also really must do some study towards the CCNA I decided to do because I wasn't busy enough already

Then if I get time after all the chores I might even crack open a fresh kit to make a start on

Post by **digger303** » Sat Apr 16, 2016 1:08 pm

Avgas wrote:'Tis indeed sir. Apparently the old ticker is now trying to sort itself out on it's own; the cable that goes into the lower ventricle has hardly fired for the last two weeks. The tech in those things is amazing, it actually records every single firing. The pacemaker tech was telling me that on such and such a date and time it did this that and the other.

good to hear it has been so successful for you....

YouTube · Post by **Skullfish** » Sat Apr 16, 2016 4:23 pm

Finish my Egg!
J

Post by **Avgas** » Sat Apr 16, 2016 5:17 pm

Thanks Digger.

Post by **MikeyBugs95** » Sat Apr 16, 2016 7:42 pm

My weekend goal isn't so much plastic m model related, but still related a bit.

Hopefully I'll get an AN/VIC-3(V) intercom set 3D model finished that I'm almost done with. Then I have a set of stowage box handles to start and complete. Oh yeah, all while having a load of homework to do...

Post by **RustyWarrior** » Sun Apr 17, 2016 10:33 am

RustyWarrior wrote:Well this weekend for me is all about my youngest grandsons 4th birthday party on Saturday and I really must crack on with digging out a few more tree stumps in readiness for some decking to be installed. If I make any progress with them I may just get round to getting the tail and engines built for the Airfix Lancaster BIII that I'm currently forcing into shape.

Not holding my breath though... SWMBO will be cracking the whip

Well, part one went OK - the little sprog had a great time but my enjoyment was slightly spoiled by work getting in the way of life again. Cue mad dash back up the A1 to sort out server problems. Got everyone working again but I'm now running way behind my loose schedule and as it isn't raining in the PRNY (Peoples Republic of North Yorkshire) it looks like I'm going to have to prioritise the tree stumps - grrrrr

Post by **Smiffy** » Sun Apr 17, 2016 3:57 pm

Smiffy wrote:First weekend goal achieved, get Dad out from under Mum's feet and get him drunk, check. Next goal is to get the Stug to a stage where its ready to be primed. Also really must do some study towards the CCNA I decided to do because I wasn't busy enough already

Then if I get time after all the chores I might even crack open a fresh kit to make a start on

Sunday update, Stug is Primed so result! Sunday evening will be devoted to Study maybe with a few beers too

Post by **digger303** » Mon Apr 18, 2016 12:39 am

wasted half a sunday playing bf4.....on the plus side I went up 2 levels. Only 500,000pts left to get to 140 level. I'll be a general then...hahaha

Post by **Twokidsnosleep** » Mon Apr 18, 2016 2:12 am

Another w/e gone and I did basically zero modelling. Oh I sat there for a few minutes fiddling around, but nothing accomplished
Most energy was at house staining hemlock boards for the soffits...about 56 done. Two more sawhorses made and couple hundred holes drilled and screws placed into plywood subfloor. I am wiped out

Post by **flundstrom2** » Mon Apr 18, 2016 7:05 am

flundstrom2 wrote: * Total exterior paint of a cheap stunt double scrap model (Hawker Sea Fury T-20) for paint practice.
* External priming the next stunt double (a Boulton Paul Defiant NF. 1) for the same purpose. But I really intend to finish this one.

Parly sucess; I've completely painted the stunt double, and glued the fuselage and wings, so now It's ready for some touch-up and gluing the details. I haven't started priming the Defiant at all, but hey; I succeeded in watching two hockey finals instead!

Skellefteå AIK lost the first, but won the second big-time, so now it's 1-1 in best of 7 games! Hopefully, that'll be enough to snatch the 3rd gold medal in 4 years, all 4 of which they won the series as well! 10 years ago (almost to the day), they weren't even playning in SHL, and now the've played the finals for 6 consequtive years, so that's quite an advancement, especially for a team that has been built from the ground up with local talents!

Post by **Lysus** » Mon Apr 18, 2016 8:12 am

Lysus wrote: I'm hoping to get my egg planes painted, glossed, and decalled. Time allowing I can get the horrible hatch fit sorted out on the GTi. Like last weekend...

Well...painted eggs, but not glossed. Frown. Hopefully I can catch up during the week a little, only one good weekend left for the SiG...

Amazing how a weekend can run away from you.

Twokidsnosleep wrote:

Exactly.

Post by **Nev** » Mon Apr 18, 2016 8:16 am

Weekend update. All friul tracks completed and started the rust tones. Also managed to start on the base and that is now ready for some paint

Post by **Stokesy44** » Mon Apr 18, 2016 8:28 am

Got some masking work done on my P51 Mustang in the shiny things SIG

That was after a false start where the masking tape ripped up the metal colour paint

Got three quarters of the way through putting the link and length tracks together on my Jagdtiger

Tigers beat Saints in the local derby

2.5 hours till my Force Awakens Blu-ray arrives

Post by **Lysus** » Mon Apr 18, 2016 8:16 pm

Avgas wrote:I'll give you guys one thing though; we've just sat through the whole lot of Breaking Bad for the second time (not all in one sitting I might add). Best thing that's ever been on telly IMO. Bryan Cranston, what an actor. Seven days younger than me and just like me he doesn't look a day over 40... American TV used to be a joke. Not anymore.

Seriously. One of the things I always appreciated about Brit TV was the idea that a season (or series) can be 3-10 episodes with a beginning, middle, and end. For so long US TV just churned out 25 episodes every year as long as it would turn a profit, which meant nothing could ever really happen to the characters since they would have to return year after year after year....

Early shows like Deadwood, Sopranos, BSG, showed us a better way, and then along comes Breaking Bad and proves that the shorter arcs are better...

Post by **Twokidsnosleep** » Thu Apr 21, 2016 4:20 pm

A small bucket list item accomplished, saw a Beatle perform.....he was a amazing, 3 hrs solid!!

Post by **Richp1969** » Thu Apr 21, 2016 5:43 pm

Hello all,

I am going to try a complete my Tamiya 1/48 Corsair this weekend. I hope to have good weather since currently I do all my modeling on the back porch. I will keep everyone posted to my progress via FB.

Sincerely,

Richard

Post by **Twokidsnosleep** » Thu Apr 21, 2016 10:16 pm

This weekend starts soon

Post by **Vleugelmoer** » Thu Apr 21, 2016 10:42 pm

Sir Paul was taken off my bucket list back in 2009. This year I'm going to see him again performing at a festival this time. The Pink Pop Festival is only a 20 min car ride away from where I life and managed to get me some free backstage passes

But back to the topic at hand: I'm going away for a short trip for some R&R and managed to sneak in some Verlinden and CMK figures in the bag with the required painting supplies without the better half seeing it. So with a bit of luck I will have those little guy's done and dusted by next weekend..

Post by **Twokidsnosleep** » Thu Apr 21, 2016 10:56 pm

Ok yes on topic..hey that was my last w/e topic for PM's concert. It was awesome btw, you are gonna love it!!
Modelling topic: finish GD Bugatti before I melt the sucker for scrap metal
Build new house with my own bare hands as everyone else seems to be an unreliable idiot and can't just do their job
Stain more soffit wood without starting any spontaneous rag fires
Get dragged around re-picking interior finishes that we already have picked but suddenly are out of production

Post by **Vleugelmoer** » Thu Apr 21, 2016 11:10 pm

I hear and feel for ya Bro, don't you just "love" aka hate a woman's prerogative to "change" Her mind

. I had the same thing with my "Ex Mrs Design" by the time I had the kitchen fronts finished I had made fronts for almost any style she had seen her Modern Living Hipster Magazine... Do what I did

Oké, Yes Dearest

your wish will be taken in consideration and just build it with what you have

Or If you actually like the change go for it and install them before she wind shifts or the moon changes its orbit, because she just might have another "change of mind"

Post by **Twokidsnosleep** » Thu Apr 21, 2016 11:16 pm

My girl and I are pretty much on the same wavelength wrt style and stuff.
Plus I know when to compromise and let her have her way if it doesn't mean jackshite to me.
The big problem is companies having samples of stuff that is short supply, out of stock or out of production.
Doors, pendant lights, wood floors, tiles...on an on. We make a decsion and then a few weeks later they cannot get it.
Pain in the butt!!!
So now more stores, more samples, more shopping for the w/e....HATE that

Post by **Vleugelmoer** » Thu Apr 21, 2016 11:24 pm

That would also send me flying off the wall and direct at the throat of the sales person and go bat crap crazy right there. Lucky for me on this side of the Atlantic and living so close to Germany only 3,5 from my front door. If the local big Home Depot doesn't have it I just cross the border and get an almost identical model from its competitor across the border..

Post by **flundstrom2** » Fri Apr 22, 2016 6:43 am

Vleugelmoer wrote: Lucky for me on this side of the Atlantic and living so close to Germany only 3,5 from my front door. If the local big Home Depot doesn't have it I just cross the border and get an almost identical model from its competitor across the border..

EU and Schengen rules!

Anyway, on topic: I think I will add some exterial details to my Hawker Sea Fury. I don't think I will manage to add all of them, though.

Post by **Lysus** » Fri Apr 22, 2016 6:46 am

Well, I am entering this weekend already behind on work, but I only have gloss coats, decals, and some extra bits to go on my eggs so I'm setting that as my goal.

After I finish my pages. And then fix my door knob (thing came off in my hand leaving the house this morning...awesome). And then take the kiddos to the zoo or something. And then somehow clean the house. And then there's the baseboard under the sink to mend. And then...

Best of luck, everyone! Happy Friday!

Post by **Avgas** » Fri Apr 22, 2016 7:21 am

Having a camera up the bum today as you do, nothing untoward, it's a genetic check as bum cancer runs in the family. Deep joy. (Or a pain in the a***...

) I'll be doing some weeding in the front garden as its getting to be weed city and I'll get a bit done on my NMF. I'll also find an excuse to go on the train somewhere being as I got my senior railcard last month. Haven't used the train for years and I'm loving it. It's actually cheaper to go to my local station and get the train into town than it is to drive in and pay for parking.

Post by **Smiffy** » Fri Apr 22, 2016 7:40 am

Avgas wrote:Having a camera up the bum today as you do, nothing untoward, it's a genetic check as bum cancer runs in the family. Deep joy. (Or a pain in the a***... )

I had the same done last year, but also had an Endoscopy at the same time as a Colonoscopy. Nothing quite like being spit roast by Endoscopes

I took the easy option and requested the roofie

My weekend, I'm off to see Jeff Lynn's ELO tonight at the O2. Hopefully I will get at least some of the paintwork done on the Stug this weekend.

Post by **Avgas** » Fri Apr 22, 2016 8:00 am

Never had an endoscope, had the bum camera before, it's not a big deal but I've heard endoscopy can be a bit uncomfortable.

Post by **Willem** » Fri Apr 22, 2016 10:10 am

[quote="Willem"]Short one for me too as I'm teaching in Brum tomorrow, 8:30-1-30.
Then down to Ampthill to see the other half (she works in London and I work in Midlands). Might get some modelling done as she has suggested I bring down a kit to work on. She's a musician and teacher like myself but she has a sideline making jewellery.
Can't take full airbrush and compressor down though so I've put aside an Airfix 1/72 Tiger Moth and some old Humbrol enamels just to keep my eye in at brush painting.
Trouble is she lives opposite a fantastic real ale pub (I mean opposite, we can sit in the pub's front room and still be on her wifi) so I may get distracted.

Take 2 this weekend (Spent too much time in the pub last Saturday).
Other half has a gig on Saturday night so won't be back until late. This means one of two things: a) I make a start on the Tiger Moth or b) I spend the evening in the pub..........

Post by **Avgas** » Fri Apr 22, 2016 11:23 am

Is there really any doubt in your mind?

Post by **Twokidsnosleep** » Fri Apr 22, 2016 2:57 pm

I am sensing a pattern there Will.
What is your girl's gig? I take it she is a musician as well
Have a good weekend

Post by **Klargplutte** » Fri Apr 22, 2016 3:09 pm

Cut a lot of wood , spring shutdown is imminent. And maybe finish my PR.XIX , just maybe close the fuselage on Eduard 109E-4.

Post by **Willem** » Fri Apr 22, 2016 3:29 pm

Twokidsnosleep wrote:I am sensing a pattern there Will.
What is your girl's gig? I take it she is a musician as well
Have a good weekend

She is an oboist. Posh end of woodwind section. What she's doing with a bass trombone player beats me but not complaining.

Have a cool weekend, Scott. Get that house built.

Post by **Richp1969** » Fri Apr 22, 2016 5:53 pm

I am working on two builds currently a Tamiya 1/48 F4U Corsair and a 1/72 Battlestar Gallactica Colonial Viper.
As I said before I hope to finish the Corsair this weekend decals and all if things work out. I do not expect to get the Viper done where I just started it. Well good luck everyone I hope to hear about your success.

Sincerely,

Richard

Post by **MrFlix** » Fri Apr 22, 2016 6:09 pm

I'll be working on my first kit this weekend, i'll start assembling hopefully tomorrow.

Post by **Richp1969** » Fri Apr 22, 2016 6:34 pm

Good luck Mr. Fix. What are you going to work on?

Post by **Richp1969** » Sat Apr 23, 2016 7:42 pm

Well here I go. Sitting down finally to start Modelling. I am really hoping to get this corsair complete this weekend.

We will see how I make out I will post pics to FB.

Good luck everyone and have a wonder safe day.

Post by **digger303** » Sun Apr 24, 2016 1:23 am

This is a no goal Sunday, but I'll get something done. Realistically though no modeling just chores and some cave modifications.

Post by **e4rly1982** » Sun Apr 24, 2016 8:25 am

After a long break I'm eager to get back to the bench, and what a way with entering my first GB (Pacific, I know it's next week it starts) my goals this week are to re stock paints and research decal options and aftermarket... Or be lazy and keep it simple and oob.. In the mean time I'm gonna take on 1 or 2 items on the shelf of doom!

Post by **Richp1969** » Sun Apr 24, 2016 3:15 pm

Shelf of doom? I have visions of a grave yard of half cobbled together airplane models that have been dropped on the floor and stepped on one too many times to repair.
I hope that isn't the case.

I hope you do well in the competition. I look forward to seeing everyone's work.

Sincerely,

Richard

Post by **Avgas** » Sun Apr 24, 2016 3:25 pm

Well I managed to get the undercarriage sprayed aluminium this afternoon on my NMF sig. Got the mob coming round for sunday dinner later so don't think I'll get much more done. Went into town yesterday with the missus ostensibly just to get one or two bits. Finished up going in a pub and coming out very much later. I remember watching Match of the Day last night but little else.

Post by **liamconnor15** » Sun Apr 24, 2016 3:35 pm

My weekend accomplishments were getting back into the hobby and it was a great success.

Post by **flundstrom2** » Sun Apr 24, 2016 8:02 pm

flundstrom2 wrote:I think I will add some exterial details to my Hawker Sea Fury. I don't think I will manage to add all of them, though.

Yie-haaa! Weekend came and passed! Not only did I add some details, I actually completed the kit fully! Now it's on the shelves, and I've even unwrapped and primed the next one; Yakolev Yak-9D. Same purpose; practice brush-painting of large areas.

Unfortunately, Skellefteå AIK didn't win the gold-medal in SHL this year. But next ... On the other hand, earlier today, I went to the Swedbank Stadion and watched Malmö FF beat Djurgården in football. (I.e. soccer for you guys across the pond).

Post by **Richp1969** » Mon Apr 25, 2016 12:07 am

Well looks like I am close but not going to get it done this weekend. Started the decals but haven't finished them yet.

Oh well I will try to complete during the week if I can.
Darn life getting in the way of my hobbies.

Oh well at least it looks decent.

Post by **Twokidsnosleep** » Mon Apr 25, 2016 7:14 am

Twokidsnosleep wrote:Ok yes on topic..hey that was my last w/e topic for PM's concert. It was awesome btw, you are gonna love it!!
Modelling topic: finish GD Bugatti before I melt the sucker for scrap metal
Build new house with my own bare hands as everyone else seems to be an unreliable idiot and can't just do their job
Stain more soffit wood without starting any spontaneous rag fires
Get dragged around re-picking interior finishes that we already have picked but suddenly are out of production

I have one more day of weekend, but Monday involves taking kids to appointments and doing paperwork etc at the office.
For the Bugatti I made the hand oil pump out of brass and a manual choke handle out of aluminum. So,got so me interior details done.
I will update my house stuff in its thread

guys have a good week

Post by **Lysus** » Mon Apr 25, 2016 7:24 am

Lysus wrote:Well, I am entering this weekend already behind on work, but I only have gloss coats, decals, and some extra bits to go on my eggs so I'm setting that as my goal.

After I finish my pages. And then fix my door knob (thing came off in my hand leaving the house this morning...awesome). And then take the kiddos to the zoo or something. And then somehow clean the house. And then there's the baseboard under the sink to mend. And then...

Best of luck, everyone! Happy Friday!

Well, a zoo was visited, a doorknob was fixed, and *some* cleaning was done. I did get a couple hours to sit down and spray my egg planes, but not long after starting my airbrush was just spitting and drooling, leaving a nice, milky slime instead of a dry coat of paint. Turns out the last time I cleaned it I must not have tightened up the spring housing and the needle was just, you know, hanging out as it pleased. So yay. Time lost to a strip down and clean, but I'm glad it was me being a dope two weeks ago and not a cracked seal. No gloss coat, but I'm hoping to squeeze that in Tuesday night somehow so I can decal like a madman before this weekend and the deadline

flundstrom2 wrote:
Unfortunately, Skellefteå AIK didn't win the gold-medal in SHL this year. But next ... On the other hand, earlier today, I went to the Swedbank Stadion and watched Malmö FF beat Djurgården in football. (I.e. soccer for you guys across the pond).

Well, if you can't win on the ice, it's good to win on the pitch, yes?

Avgas wrote:Well I managed to get the undercarriage sprayed aluminium this afternoon on my NMF sig.

Nice! I need to get these eggies off my bench, that P-51 is taunting me....