Model parts turned back by Border Force

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
ChrisSteadman
Corporal
Corporal
Posts: 82
Joined: Sun Oct 27, 2013 4:15 pm
Location: SE London, UK
Great Britain

Model parts turned back by Border Force

Post by ChrisSteadman »

I've been waiting for a small order to arrive from Poland, six metal gun barrels in 1/72. I ordered them from RB Models on the 8th April. The tracking information has shown that they have been stuck at the sorting centre at Heathrow since 12th April. After consulting RB, today I phoned Royal Mail. They have told me that the package was deemed to contain items that the Border Force did not want coming into the country and so it has been returned to Poland! I've emailed RB to let them know and it will be interesting to hear from them if this has happened to them before.

Anyone else had a similar experience?
ATB,

Chris
User avatar
Lysus
Captain
Captain
Posts: 4562
Joined: Fri Dec 18, 2015 11:37 pm
Location: Seattle, US
United States of America

Re: Model parts turned back by Border Force

Post by Lysus »

I've done my fair share of ordering from Japan, and though kits are no worries, paints and fillers are "flammable" and thus can't be airmailed and are not always properly sent through customs in a uniform manner.

In a funny twist, if you were to examine my orders, I seem to buy a lot of "skin cream" ;)
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
OneSmallStep1966
Command Sergeant Major
Command Sergeant Major
Posts: 935
Joined: Wed Nov 18, 2015 2:37 pm
Location: Herne Bay, Kent (UK)
England

Re: Model parts turned back by Border Force

Post by OneSmallStep1966 »

Good grief, no doubt some jobsworth taking his job to seriously.

I've ordered lots of modelling bits from Poland (mostly off eBay) and never had an issue with delivery to the UK. My last order was some 1/35 ammo that could look like (to an idiot) bullets :)
User avatar
ForbesHutton
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 1956
Joined: Mon Sep 02, 2013 9:10 am
Location: To,On,Ca
Scotland

Re: Model parts turned back by Border Force

Post by ForbesHutton »

The customs declaration probably said "gun barrels" and someone hit the big red button that sent off the strobe lights and klaxon siren.
Image
ChrisSteadman
Corporal
Corporal
Posts: 82
Joined: Sun Oct 27, 2013 4:15 pm
Location: SE London, UK
Great Britain

Re: Model parts turned back by Border Force

Post by ChrisSteadman »

ForbesHutton wrote:The customs declaration probably said "gun barrels" and someone hit the big red button that sent off the strobe lights and klaxon siren.
There would have been no customs declaration as both Poland and the UK are EU members. They would have had to x-ray or open the package to find what was inside.
ATB,

Chris
User avatar
Lysus
Captain
Captain
Posts: 4562
Joined: Fri Dec 18, 2015 11:37 pm
Location: Seattle, US
United States of America

Re: Model parts turned back by Border Force

Post by Lysus »

Border Force sounds like a cheesy 80s action drama. Is that really what they're called there?
Backlog Progress: |||||||||||||||-------|----------|----------| 26/80
On the bench: Hasegawa 1/72 Tatiana's Vanship
Last Completed: Bandai HGUC Geara Zulu // Hasegawa 1/48 J2M3Raiden Prisoner of War
ChrisSteadman
Corporal
Corporal
Posts: 82
Joined: Sun Oct 27, 2013 4:15 pm
Location: SE London, UK
Great Britain

Re: Model parts turned back by Border Force

Post by ChrisSteadman »

Lysus wrote:Border Force sounds like a cheesy 80s action drama. Is that really what they're called there?
Yep. It used to be 'UK Border Agency', but they came under a lot of criticism for inefficiency and after a damning report they were split up into three separate agencies, Border Force, Immigartion Enforcement and UK Visas and Immigration.
ATB,

Chris
User avatar
Vleugelmoer
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1011
Joined: Mon Mar 21, 2016 3:06 pm
Location: Geleen, Limburg, The Netherlands
Contact:

Re: Model parts turned back by Border Force

Post by Vleugelmoer »

Chris, what barrels where you after. I think most Aber, PM-Profi sets are available via Historex agents in the UK, if not Hannants would probably have them. I also have a couple of got to shops in Poland and I never experienced any problems, as goods are in free circulation with in the EU. I know it's not the "British Thing" to do but I would put in a claim with the Incompetent government agency for material loss due to there f-up...
Damm the glue is getting to me :crazy:

On the Bench:

1:35 Italeri Jeep Follow Me Jeep for the PTO GB
1:32 Revell F-4 Phantom for the Phantom Freaks SIG
ChrisSteadman
Corporal
Corporal
Posts: 82
Joined: Sun Oct 27, 2013 4:15 pm
Location: SE London, UK
Great Britain

Re: Model parts turned back by Border Force

Post by ChrisSteadman »

Vleugelmoer wrote:Chris, what barrels where you after. I think most Aber, PM-Profi sets are available via Historex agents in the UK, if not Hannants would probably have them. I also have a couple of got to shops in Poland and I never experienced any problems, as goods are in free circulation with in the EU. I know it's not the "British Thing" to do but I would put in a claim with the Incompetent government agency for material loss due to there f-up...
Thanks for the ideas, good of you to make them. I've had an email from Beata at RB who is as dumbfounded as the rest of us. This has never happened to them before. She is going to resend the order.

Once the package is back with RB, and we have any additional information as to why it was rejected, I am going to make a complaint. Their web site is a marvel of design; it really is impenetrable or circular in many places, so much so I can't believe it is incompetent design but deliberate. However, I have now found a route to complain along.
ATB,

Chris
User avatar
Kevthemodeller
Lieutenant Colonel
Lieutenant Colonel
Posts: 5825
Joined: Sat Mar 26, 2016 8:31 am
Location: Newton Abbot UK
England

Re: Model parts turned back by Border Force

Post by Kevthemodeller »

They stop everyone who should be here or let in but allow all those who might give them a bit of a problem a free pass, it's all about ticking boxes and quoter's, another case of agencies (private contractors really i.e. not civil servants) now running what was once government/civil service because it cheap bit like PCSO's half a policeman coz it's cheap :shhh: :shhh: :shhh: :shhh: we're not supposed to know that :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Kev

On the bench:
Martini Brabham BT44B
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Model parts turned back by Border Force

Post by digger303 »

perhaps they thought it was the components for a mini RC terminator vehicle intended to be assembled then sneaked up the the sewers of London to scare the crap out of the PM. :mrgreen: :mrgreen: :lol: :lol: :lol:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
ChrisSteadman
Corporal
Corporal
Posts: 82
Joined: Sun Oct 27, 2013 4:15 pm
Location: SE London, UK
Great Britain

Re: Model parts turned back by Border Force

Post by ChrisSteadman »

POSTSCRIPT: RB received the package back fairly quickly. There was no indication on it to indicate why it had been refused entry. They sent it out to me again and it arrived in three days, with no fuss.
ATB,

Chris
Post Reply

Return to “Modelling Chat”