Revell 1/8 ford 32 rod

Cars, trucks and bikes
Post Reply
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all well thanks to the generosity of michu (from another forum I am on) I have this kit to build. I will be doing it oob to try and regain some confidence. It is a massive kit (which again I thank him so very much for) my intention (assuming I don't ruin another kit) is when finished to take it apart and add more detail (given the size of this kit that should be more than possible) provided of course I don't ruin it.
So wish me luck mates.
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all well here's the start, I've put a 1/24 car (a big one in real life next to the engine just to give an idea of size)
Image
Image
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Oh well I wish I'd done a bit of research before I painted the engine it's a 61 series pontiac v8 and revells call out for engine colour is yellow(which as we all know is one of the weakest pigments) so after struggling to get a solid colour, I've discovered it should be light blue, now I have to strip it and re do it light blue (not too upset as I didn't like the yellow anyway.
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all well i like this colour better than the yellow.
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all, enjoying this engine, sticking strictly to oob but there is so much potential for detailing up.
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all here's the next update.
Image
Image
Image
I've put a large 1/24 car along side it for comparison
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all tonight's bit, according to the instructions the engine is finished and there are no missing gaps in the spures, and the list of parts dosent list it but I'm sure there should be a fan blade ? I no nothing about these big American engines but every other car engine I've seen has one, also I've chosen the chrome exhausts, I wonder do they go blue like bike exhausts.
Image
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all I've decided, as I used to customise bikes in my youth I would do a custom paint job on this I've started the background sky, I'm intending to do dragons and stuff on it, I've done it matt so I can draw and paint on it then in the end I will gloss it.
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all made a start on the paint.
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

HI all here is the next dragon going on.
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all another little update.

Image

Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all another update, my customising days are obviously behind me, I used to be good at this, still the advantage is I can always respray with another job, and I'm already thinking of something

 Involving black and gold.

Image

Image

Image

Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all here is the next update, I really am enjoying this (I know the paint job ain't the greatest but I've not ruined the kit, the way I've painted it, it's easily over sprayed and none of it will show) this is a great kit, I was going to build this oob but I'm sorely tempted to add lots of detail, I'm just worried if I do i may end up ruining another one, I seem to be in a catch 22 at the moment, I want to do more but I'm worried if I do i will ruin it.
Image
Image
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all here is the next update, this has working steering, it's a very nice kit to put together.
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all another update on this one.
Image
Image
Image
Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all here is tonight's bit.

Image

Image

Image

Image

Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi not much of an update but I've been very busy of late.

Image

Image

Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all, well I thought I was getting there(I always knew the paintwork was rubbish but I can and will be spraying over that) this is turning out to be another failure the instructions show the door latch pointing down (don't, point it upwards, it won't clear the gap in the inner door skin) admittedly that's not down to me, that's the instructions, however I cannot get the doors to open (whatever glue I use shutting the doors puts stress on the hinges and forces them off, also the gap around the door is horrendous( I wish I hadn't cut them out) all in all another ruined kit, the kit it's self is great, it's the idiot putting it together. When I respray it, it will be one colour, hopefully it will look better for that, still a few bits to put on it but I can't see them doing much for the overall model.

Image

Image

Image

Image
kpisnuts
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1131
Joined: Sat May 02, 2015 9:05 am
Location: Halstead, Essex
Great Britain

Re: Revell 1/8 ford 32 rod

Post by kpisnuts »

Hi all well it shows how much notice my missus takes of my modeling, since I was sat right by her on the couch whilst painting this, she said "did you paint those dragons or are they transfers " I said "yes I painted them, I know they're rubbish, I'm going to spray over them" she said " don't you dare, they're fantastic" go figure. Anyway here it is done. Wish I'd done a better job but looks like I'm stuck with it the way it looks now.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
Twokidsnosleep
General
General
Posts: 18481
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: Revell 1/8 ford 32 rod

Post by Twokidsnosleep »

Impressive paintwork, WOW
Scott

On, Under or near the desk
Mr Tamiya Memorial build...Alfa Romeo Bt-46
User avatar
shortCummins
Chief Warrant Officer 2
Chief Warrant Officer 2
Posts: 1646
Joined: Mon Aug 04, 2014 4:30 pm
Location: Cotgrave, Nottingham
Great Britain

Re: Revell 1/8 ford 32 rod

Post by shortCummins »

I'm with your girlfriend, I'm sure that they could have been better, in your eyes my stuff never turns out as good as I want, but to the rest of us those dragons are way beyond our ability

top class work!
rgds
John (shortCummins)
"I'm tall for my height" - "it looks like it was painted by a blind chimpanzee"
Post Reply

Return to “Road Vehicles”