GraphicAir A300S D Airbrush Spray Booth Group Buy

[Lee]

We've arranged an exclusive ISM Group Buy discount with the nice guys over at GraphicAir.co.uk for their amazing A300S D spray booth extractor.



This is probably the best spraybooth/extractor on the market at the moment for modelling purposes, especially around this price point!
I've had mine for nearly 4 years now and it has behaved impeccably in all that time, Paul has had his for the same amount of time, but he uses his a LOT more than I do mine...lol

Here's an unboxing and test video I did when I received mine a few years ago. Please ignore the quality of the vid, we have progressed a little since then...lol


[youtube]JmT0YhoUX6M[/youtube]



Anyway, the deal is - up to 10 participants we get 10% discount. Once we hit more than 10 people I have negotiated an even better deal with it jumping up to 15% discount....!!! So, tell all your modelling buddies to come on over and join in the group buy, the more we get involved, the cheaper it is for everyone.

The retail price of the unit is £280.84 (inc VAT) and £243.03 (exc VAT). After the 10% discount, the price is £252.75 and £218.72 respectively. After the 15% discount, the price is £238.71 and £206.57 respectively. GraphicAir have said they will ship worldwide, but we need to get your address details to give you a clearer price for shipping overseas with a definite price nearer the time of shipping (shipping prices are constantly in flux!). In the UK, shipping is £8.00.

All you need to do is show your interest on this thread. When I think we've had all the interest we're going to get I'll contact people for address and payments details. Once everyone has paid, the units will be ordered direct with GraphicAir, who will ship them direct to your door.

If you have any questions at all, then please feel free to ask on this thread

*** IMPORTANT UPDATE ***

Shipping prices are now here....

UK - £8.00
Holland, Belgium, Ireland - £20.00
France, Germany - £25.00
Norway & all of Scandinavia - £30.00
Spain, Portugal, Italy - £30.00
Russia - £75.00
Middle East - £90.00
USA, Canada, Australia, New Zealand - £100.00



Confirmed Buyers.....
(Members with an X after their name have confirmed their details)

Coops - Australia - X
Juhanurminen - Finland
Astaroth - Germany - X
ESL2774 - UK - X
flyonthewall - UK - X
tecloinnz - New Zealand - X
Tay99 - UK - X
Digger303 - Australia - X
Filmman586 - USA - X
Matt58 - USA - X
BossChicken - UK - X
droseman - UK - X
TheMaxx64 - Italy - X
GlenEagles - UK - X
Twokidsnoseep - Canada - X
GrahamB - UK - X
Skullfish - UK - X
SteveW - UK - X
Muzrik - UK - X
modeller - UK - X
gene1138 - USA - X
JPease1972 - USA - X
Ukemaxxer - UK - X
SkEeZicks - Canada - X
Ivan2604 - UK - X
Jollyrogertomcat - Canada -X





Here's a few details about the A300S D....

Product Description
Art No: A300S-D - GraphicAir A300S-D Air Bench Top Spray Booth Extraction Cabinets

Dimensions wxhxd 565x390x430

Contains, filters and extracts for a cleaner, healthier working environment for the hobbyist, modeler and arts and craft enthusiast.

Spray Booth applications include filtration and removal of:

Aerosol paints, lacquers, adhesives (glue booth for Spray Mount) and airbrush overspray. Solder fume, general solvent vapours and gases extracted to atmosphere. Filtration of grinding dusts, general particulates and powders etc.

Extraction unit
(All odours and gases and extracted to atmosphere)

Description
Steel construction finished in dove grey - plastic replaceable spray/fume shield - particulate filter - centrifuga blower, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia. - carry handle.

Operation
All Graphic Air filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This unit can be used in two positions.

Horizontal position - for Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.
Vertical position - For model sprays and airbrush use - light grinding particles (not sparking) - solder fume extraction and general solvent and gas extraction.

Filtration
The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.
The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

Specification



Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH) regulations 2002 and 2004.


You can get full details of the product and have a look around GraphicAir's website here, just click the picture below or give them a call....

[Filmman586]

I'm in Lee!

[Coops]

I am potentially interested dependent on ship costs to WesternOrstralia

ANY WESTERN/AUSTRALIAN WHO ARE INTERESTED MAYBE WE CAN ALSO DO A GROUP SHIPPAGE

coops

[Richie]

Im in Lee. Thanks. If shipping to Canada for it was reasonable.

[clarou]

Interesting. I need to get a new spray booth anyway. Hope shipping to Canada is not to much.

[ESL2774]

I'm in Lee, I'm in Cambridge UK.

[HIghAltitudeScale]

I'll buy one we as long as its set up for use in the USA!

[Skullfish]

I'm in, Glasgow based.

Jase.

[P51dplt]

I'd be interested if they make a US version that will work on 110v.

[63bp]

I'm in Lee,
Again depending on shipping to down here to Sydney.

[SkEeZicks]

i would be in as well, of course based on shipping to Canada being less than the unit and that it will work here...

[Andras]

I'm interested Lee, depending on the total amount and shipping to the Netherlands.

[Astaroth]

I'm definitely interested. Shipping would be to Germany.
Is there any chance to get a rough estimate for shipping before we decide finally?

[Matt58]

Great job Lee
I do believe we can get this in a 110 volts in 60Hz or 50Hz. USA use 60 Hz don't know if my friends north of the border use 60 or 50 Hz.
Lee can you double check on this sorry to be a pain in the arse

[seidenglanz]

Yes, also interested but would need to know the price for shipping to New Zealand first before I commit to buy.

cheers, steve

[Lee]

OK, GraphicAir have now closed down for christmas.

I will get more details after xmas for all of you. I know for a fact that they've sent them to the USA and Canada before so, I'm sure it won't be a problem.

[Jagdpanzer]

Interested

[Twokidsnosleep]

I am interested as well

[SteveW]

I would be interested Lee.

[Lee1979]

Iam interested if the price is good thanks lee

[jollyrogertomcat]

Hello Lee Definitely interested . Look forward to more details.

Merry Christmas

[BlackSheep1]

OK, GraphicAir have now closed down for christmas.

I will get more details after xmas for all of you. I know for a fact that they've sent them to the USA and Canada before so, I'm sure it won't be a problem.

I'm in the USA and I have one.
I remember that when I ordered mine I had to let them know I was in the USA so they could replace the blower with one suited for US voltage.
Lee, are they still doing this with the blowers?

[digger303]

Yep I am also interested.

[galileo1]

OK, GraphicAir have now closed down for christmas.

I will get more details after xmas for all of you. I know for a fact that they've sent them to the USA and Canada before so, I'm sure it won't be a problem.

I'm in the USA and I have one.
I remember that when I ordered mine I had to let them know I was in the USA so they could replace the blower with one suited for US voltage.
Lee, are they still doing this with the blowers?

Yep, no problem shipping it to the US. I got mine a couple of years ago.

And yes, just tell them you want the US voltage version of it. Hiwver, they're smart enough to know that when they see your shipping address (they told me themselves). But, just in case, it's always good to tell them.

[tecloinnz]

I'm interested. I live in New Zealand. I hope the cost of shipping isn't too high. Maybe the shipping cost can be reduced if enough Kiwis are included in the group buy. Thanks a lot for organising this Lee. It's an excellent opportunity.

[Joesdad]

Interesting.... but maybe 6 months too early for me. Will keep an eye on developments

[TheMaxx64]

I'm interested too. Shipping to Italy mainland. Thank you.

Max

[digger303]

If everyone goes ahead with there intentions then this will be a big order. Another modeling business ( who should remain nameless) managed to get them down to a 20% discount...perhaps we might be so lucky. Can't wait for all this to go ahead.
Who wants to buy a cheap china brand booth ??
cheers

[Tay99]

I am interested if we can get the discount.

[Tomso]

I`m in Live in Norway, but that should`t be a problem

[tommym]

Sounds good to me

Tommy

[Eli]

i`m in.
Moscow, Russia

[Muzrik]

Hi, I'm interested..

[BossChicken]

I'm definitely in as I was going to get one soon anyway

[SystemInShock]

I'm interested if shipping isn't horrible to the US. Do US residents have to pay the VAT?

[digger303]

I'm interested if shipping isn't horrible to the US. Do US residents have to pay the VAT?

No

[Lee]

Thread on first page now updated with shipping prices.....

*** IMPORTANT UPDATE ***

Shipping prices are now here....

UK - £8.00
Holland, Belgium, Ireland - £20.00
France, Germany - £25.00
Norway & all of Scandinavia - £30.00
Spain, Portugal, Italy - £30.00
Russia - £75.00
Middle East - £90.00
USA, Canada, Australia, New Zealand - £100.00

[Lee]

If you're still interested please respond below and I will add you to the list on the first page. Please be sure to do this within the next 14 days.

[Coops]

Greetings From WestOz...
I am definitely in.. Is there a final cost on the unit itself yet?

"After the 10% discount, the price is £252.75 and £218.72"

Coops

[Juhanurminen]

Im in for one
Juha
Finland

[Astaroth]

I'm also still in.

[ESL2774]

Yes I am still definite for one please

[flyonthewall]

I'm up for one!

[tecloinnz]

I'm still interested! Thanks a lot.

[Tay99]

Yep I am still interested

[digger303]

Massive number of interested people. It is going to take them awhile to fire fill the order, even if a third don't follow through.

[Filmman586]

Still in!

[Matt58]

Wow did not think shipping would be that much but I am still in
Lee did you find out if they have a power option for the states

Thanks Matt

[BossChicken]

I'm still in .

[droseman]

Hi,

I'm interested in this offer, please could you put me on the contact list?

--dave