Modelling injuries

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
russ2471
Staff Sergeant
Staff Sergeant
Posts: 243
Joined: Sun Jun 16, 2013 3:08 pm
Location: London

Modelling injuries

Post by russ2471 »

My first craft knife injury :violin: bled like a stuck pig had too super glue it to stem the blood loss, stinging like a mo fo :bash:
You do not have the required permissions to view the files attached to this post.
Last edited by Lee on Sun Aug 04, 2013 10:53 am, edited 1 time in total.
Reason: Moved to the correct forum for you :D
Russ

On the bench

Airfix Bf109
Tamiya 1/35 British Special Air Service jeep
Meng 1/35 T90A
Trumpeter ASU-85
User avatar
DC87
Chief Warrant Officer 2
Chief Warrant Officer 2
Posts: 1799
Joined: Wed Jun 05, 2013 7:16 pm
Location: Exeter, Devon, UK
England

Re: Modelling injuries

Post by DC87 »

:eeek: :violin:

Your supposed to use super glue on the kit not yourself :tongue:, reach for the first aid box not the modelling box.

Hope it heals soon
Dan C

Filling the workbench with:
Sopwith Snipe late post war
WW1 RFC SE5a

WW1-1/32 Snipe
Workbench gets full with models being built - Buys another workbench!

Image
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Modelling injuries

Post by McLeod »

OUCH!!!
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
russ2471
Staff Sergeant
Staff Sergeant
Posts: 243
Joined: Sun Jun 16, 2013 3:08 pm
Location: London

Re: Modelling injuries

Post by russ2471 »

:rofl: cheers Dc I am ashamed to admit I'm a paramedic with no first aid kit at home :oops: but though I don't recommend it, super glue works just fine
Russ

On the bench

Airfix Bf109
Tamiya 1/35 British Special Air Service jeep
Meng 1/35 T90A
Trumpeter ASU-85
User avatar
DC87
Chief Warrant Officer 2
Chief Warrant Officer 2
Posts: 1799
Joined: Wed Jun 05, 2013 7:16 pm
Location: Exeter, Devon, UK
England

Re: Modelling injuries

Post by DC87 »

russ2471 wrote::rofl: cheers Dc I am ashamed to admit I'm a paramedic with no first aid kit at home :oops:
:rofl: :rofl: now that is rather funny, I suppose the stretcher in your ambulance is used as a work bench and the racks used to store needles and drugs are used for paints :tongue: .
Dan C

Filling the workbench with:
Sopwith Snipe late post war
WW1 RFC SE5a

WW1-1/32 Snipe
Workbench gets full with models being built - Buys another workbench!

Image
Johni044
Sergeant First Class
Sergeant First Class
Posts: 309
Joined: Tue Jun 04, 2013 5:29 pm
Location: Skelmersdale, Lancashire, U.K.

Re: Modelling injuries

Post by Johni044 »

Isn't that what superglue was original designed for ? :think:
My Portfolio
2014: acquired 51; Built 27

On the bench, Urm a lot.....
User avatar
wappynutter
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2256
Joined: Mon Jun 17, 2013 11:39 pm
Location: Sutton in Ashfield, Nottinghamshire. UK
Great Britain

Re: Modelling injuries

Post by wappynutter »

:lol:
Like the scene from dog soldiers.... :lol:
"Shove his guts back in!"......"but they don't fit!".......
Classic.... :th:
Luckily I'm up north and you south west DC so he ain't never gonna be our paramedic on call...... Lol....
"Heart attack sir...let me just move this partly built Sherman at 1:35 scale then we'll get you on the stretcher!".... Excellent... :th: :cheers2:

Well done stopping the bleeding all over you kit Russ, read somewhere that superglue was invented for such things.don't they use it on folks with split open heads instead of stitching?..
Regards Andy...Image
YouTube Channel..... http://www.youtube.com/channel/UCRdZFBjr6oO-T-2ydSB4HIg
User avatar
NovYank
Sergeant First Class
Sergeant First Class
Posts: 331
Joined: Sun Jun 09, 2013 5:40 pm
Location: New York

Re: Modelling injuries

Post by NovYank »

Look on the bright side, now you have literally put your blood and sweat into this build. I do the same thing with every new set of Xacto blades I get.

Getting the cut up thumbs is like an initiation into the craft, it's Freshman Friday up in here!!! Everyone get out your paddles!!! Errr...Uhmm... I mean Scale-Modeler Saturday!!!
Proper Preparation Prevents Poor Performance
russ2471
Staff Sergeant
Staff Sergeant
Posts: 243
Joined: Sun Jun 16, 2013 3:08 pm
Location: London

Re: Modelling injuries

Post by russ2471 »

:rofl: :clap2: :rofl: :clap2: I think it may well have been what it was invented for, I think the stuff they use in hospitals may be a little more sterile but I have the antibodies of a Viking so I should be ok :nena:

Quick sub note..... Getting TET on the said cut makes you cry :violin:
Russ

On the bench

Airfix Bf109
Tamiya 1/35 British Special Air Service jeep
Meng 1/35 T90A
Trumpeter ASU-85
User avatar
alextheblue
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2679
Joined: Mon Jul 15, 2013 11:30 am
Location: Slough, United Kingdom
Contact:
Scotland

Re: Modelling injuries

Post by alextheblue »

Nice slice Russ!!

It's been a while but I seem to remember from my old field-craft training that all you really need is a Swiss Army knife and a tube of super-glue - jobs a good un!! :eeek: :P
"Courage is feeling fear and acting anyway."

www.alextheblue.com
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Modelling injuries

Post by Gav0909 »

Yeah I thought superglue was developed in Vietnam as a quick and temporary way of closing wounds in the field.

My worst injury was when I was using a metal ruler and stanley knife to cut some plastic card and the knife slipped into my finger. Damn near took an entire slice off the edge of my finger tip! Still got a scar from that one. Sorry for the bad pic, was taken on my phone years ago when I did it. I remember walking to the shop with it wrapped in tissue to buy a plaster for it as I had none lol.

Image
WebbyNZ
Master Sergeant
Master Sergeant
Posts: 393
Joined: Thu May 30, 2013 11:02 am
Location: Manawatu, New Zealand
Contact:

Re: Modelling injuries

Post by WebbyNZ »

Gav0909 wrote:Yeah I thought superglue was developed in Vietnam as a quick and temporary way of closing wounds in the field.

My worst injury was when I was using a metal ruler and stanley knife to cut some plastic card and the knife slipped into my finger. Damn near took an entire slice off the edge of my finger tip! Still got a scar from that one. Sorry for the bad pic, was taken on my phone years ago when I did it. I remember walking to the shop with it wrapped in tissue to buy a plaster for it as I had none lol.
Glad im not the only one, my scar is fight at the knuckle end of my index finger. when it happened i said 'nah its fine' after much insistance by others i ended up with 5 stictches in it, apparently new blades are super sharp and can really get in deep.
Stand aside caffine, this is a job for alcohol.
User avatar
Colin
Sergeant Major
Sergeant Major
Posts: 649
Joined: Mon Jul 08, 2013 2:11 pm
Location: N E Scotland

Re: Modelling injuries

Post by Colin »

My only real modelling injury's have been to my bank balance :nena:

Seriously, have had a few nasty finger cuts in the past but nothing that needed stitches.

One thing we should all be aware of are the hidden dangers though, resin dust, spraying if with no extractor then please use a mask, the harm to lungs is never immediate but will have an effect over time.

I really need to get myself an extractor.
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Modelling injuries

Post by Gav0909 »

Yeah I should get myself a painting mask really. Hopefully when I come to move and can set up a better painting/modelling area than I have then I can build some kind of spray booth, or at least an extractor system.

You can make a spray booth from a plastic storage box and a bathroom extractor fan, and some dryer pipe.
User avatar
Daishi12
Warrant Officer
Warrant Officer
Posts: 1393
Joined: Fri Jun 28, 2013 9:25 pm
Location: Mountain Ash, South Wales
Wales

Re: Modelling injuries

Post by Daishi12 »

Still got the scars on left middle finger (8 years of age when it happened) and left index finger (9 years of age when that happened) and I'm nearly 48 now :(
W.I.P.

Revell 1/72 P-47M
Airfix 1/72 Bristol F2B Fighter

Technical Consultation for MrsModellor :- Tamiya 1/35 S.A.S. Pink Panther
User avatar
chief5437
Major
Major
Posts: 4810
Joined: Fri May 31, 2013 1:25 pm
Location: England
England

Re: Modelling injuries

Post by chief5437 »

I love putting a new blade in my exacto knife. I know as soon as its done it will shortly be tasting blood! Every time! I've just stuck it right into my palm, blood spurting all over the place! Thank god for super glue and duct tape!!
Chief
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Modelling injuries

Post by Coen »

Ouch!!!
I dropped a 150lbs oak table on my foot this morning in my cave.
I was tossing out my old paint bench and trading up with an old dining room table.
Guess I zigged when I should have zagged.
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Modelling injuries

Post by Paul »

Owe that table must have hurt.

I've not really hurt myself modelling yet, had plenty of plumbing mishaps including breaking up a cast iron bath with a sledge hammer missed the bath and the handle along with my hand hit the edge of the bath, made a right mess of the customers bathroom, there was blood everywhere and my fav one, kneeling near a large bag of nails I slipped onto the bag, stood up and the bag of nails was hanging from my knee, pulling that lot out I nearly passed out lol.
User avatar
chief5437
Major
Major
Posts: 4810
Joined: Fri May 31, 2013 1:25 pm
Location: England
England

Re: Modelling injuries

Post by chief5437 »

Ow! I guess super glue won't help with that?! Good job you don't model with your toes though!
Chief
User avatar
Daishi12
Warrant Officer
Warrant Officer
Posts: 1393
Joined: Fri Jun 28, 2013 9:25 pm
Location: Mountain Ash, South Wales
Wales

Re: Modelling injuries

Post by Daishi12 »

I haven't had many modelling injuries (just the normal Xacto demon needing to be fed blood type mishaps) but when I was a paint sprayer I had about 2 litres of industrial strength spray gun cleaning thinners fountain into my eyes. Got to say that it was only to touch painful....
W.I.P.

Revell 1/72 P-47M
Airfix 1/72 Bristol F2B Fighter

Technical Consultation for MrsModellor :- Tamiya 1/35 S.A.S. Pink Panther
User avatar
PhildaFish
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1087
Joined: Wed May 29, 2013 7:08 pm
Location: Somerset, England
Contact:
Great Britain

Re: Modelling injuries

Post by PhildaFish »

Ok, loads of scalpel blade injuries for me, usually with a comment along the lines "blimey, that's rather sharp!" or words to that effect but I shouldn't be surprised using medical blades!
Most squeamish recent injury, though? I'd got oil on a belt in my car (serpentine belt?) and I had the great idea of holding a cloth on the belt to rub it off. Worked well for a few seconds then the cloth caught in a wheel and dragged it and my index finger round the wheel. I honestly thought I'd lost the top of my finger; my hand went straight into my arm pit while I swore a bit and I was afraid to look for a while. Thankfully I hadn't lost it but I had broken it and cut it about half way though. Cleaned the oil out and cleaned it, butterfly stitched it and splinted it to my middle finger all by myself as I'm not too keen on hospitals!
Please visit my website
Image
For instructions, historical paint charts & paint conversion charts.
Please like Scale World's Facebook page.
My Facebook page.
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Modelling injuries

Post by Paul »

PhildaFish wrote:Ok, loads of scalpel blade injuries for me, usually with a comment along the lines "blimey, that's rather sharp!" or words to that effect but I shouldn't be surprised using medical blades!
Most squeamish recent injury, though? I'd got oil on a belt in my car (serpentine belt?) and I had the great idea of holding a cloth on the belt to rub it off. Worked well for a few seconds then the cloth caught in a wheel and dragged it and my index finger round the wheel. I honestly thought I'd lost the top of my finger; my hand went straight into my arm pit while I swore a bit and I was afraid to look for a while. Thankfully I hadn't lost it but I had broken it and cut it about half way though. Cleaned the oil out and cleaned it, butterfly stitched it and splinted it to my middle finger all by myself as I'm not too keen on hospitals!
Not good,Phil, hope your alright.

I remember a similar story on a motorbike forum a guy trying to clean his bike chain the same way you did the belt. He reved the engine and it dragged his hand threw the chain and sprocket, there wasnt much of his hard left as far as I remember. :eeek:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Modelling injuries

Post by Coen »

If we're talking non-modelling injuries... I'm a bit of an Evel Knievel of boo boos.
I've been stabbed 4 times, shot once, shot at twice, run over by three cars, beaten with a tent pole, smashed in the face with a garden hoe, and an Alberta Spruce, I also managed to accidentally set myself on fire once, fully engulfed in seconds, that one scared me pretty bad.
My Mother-in-Law heard about all this when my wife and I first started dating and she said..."you know that song Stand By Your Man... not to close to this one eh?"
User avatar
PhildaFish
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1087
Joined: Wed May 29, 2013 7:08 pm
Location: Somerset, England
Contact:
Great Britain

Re: Modelling injuries

Post by PhildaFish »

Thankfully it was a smooth wheel, not a toothed cog, so it all healed up nicely with only a little scar, thanks Paul.
Please visit my website
Image
For instructions, historical paint charts & paint conversion charts.
Please like Scale World's Facebook page.
My Facebook page.
User avatar
PhildaFish
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1087
Joined: Wed May 29, 2013 7:08 pm
Location: Somerset, England
Contact:
Great Britain

Re: Modelling injuries

Post by PhildaFish »

All in the line of duty, Coen?
Please visit my website
Image
For instructions, historical paint charts & paint conversion charts.
Please like Scale World's Facebook page.
My Facebook page.
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Modelling injuries

Post by Paul »

Coen wrote:If we're talking non-modelling injuries... I'm a bit of an Evel Knievel of boo boos.
I've been stabbed 4 times, shot once, shot at twice, run over by three cars, beaten with a tent pole, smashed in the face with a garden hoe, and an Alberta Spruce, I also managed to accidentally set myself on fire once, fully engulfed in seconds, that one scared me pretty bad.
My Mother-in-Law heard about all this when my wife and I first started dating and she said..."you know that song Stand By Your Man... not to close to this one eh?"
Man that must have been one hell of a night out :eeek:

No seriously that's quite a list, I take it most of those where while you were in law enforcement?
User avatar
McLeod
Master Sergeant
Master Sergeant
Posts: 422
Joined: Sat Jul 20, 2013 4:59 pm
Location: Kent, UK

Re: Modelling injuries

Post by McLeod »

Coen wrote:If we're talking non-modelling injuries... I'm a bit of an Evel Knievel of boo boos.
I've been stabbed 4 times, shot once, shot at twice, run over by three cars, beaten with a tent pole, smashed in the face with a garden hoe, and an Alberta Spruce, I also managed to accidentally set myself on fire once, fully engulfed in seconds, that one scared me pretty bad.
My Mother-in-Law heard about all this when my wife and I first started dating and she said..."you know that song Stand By Your Man... not to close to this one eh?"
Man you've really been through the ringer haven't you.
I thought I was bad, been stabbed in the face on one side and had to have re-constructive surgery on the other side when I had my cheek and eye socket smashed. Now have two titanium plates making up my cheek/eye socket - practically a cyborg lol.
I got a cool before and after x-ray, will see if I can post it here
There can be only one!
Unless your building two, or three, or four - ah to hell with it.

My Youtube Channel
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Modelling injuries

Post by Coen »

Yeah, all but the set myself on fire... did that one as a kid burning an ant hill with gasoline.
Really.. epic stupid that one was.
I was lucky that I was standing on a beach for the lake in my back yard or I would have been a dead Dude.

That would be a cool photo Ken!!! :thumb2: :thumb2: :thumb2:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Modelling injuries

Post by Coen »

Nails in the knee though... that one makes the skin crawl quite nicely... blah...
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Modelling injuries

Post by Gav0909 »

Man compared to half of you guys it must appear that I have been wrapped in cotton wool all my life, which isn't the case, my parents were not the molly coddling type. Me and my brother were practically forced to play outside alot as kids.

However considering that I have never broken a bone, nor had any injury classed as serious. Most serious was I fell against the harling (small stones and crushed shells used to make the outside of houses look nice here in the UK for those who won't know) on my house when my bike brakes locked once and sliced my arm open, prob should have had stitches but I wouldn't have it, still got a 3 inch scar on my arm. And I fell over a gate once and smacked my head off some stones, got a nice scar tissue lump on my forehead now. Other than that, its just the usual scrapes, bumps and sliced thumb pads from slipped knives.
User avatar
Nige201980
Captain
Captain
Posts: 4095
Joined: Wed Jun 05, 2013 9:30 am
Location: Doncaster South Yorkshire UK
Contact:

Re: Modelling injuries

Post by Nige201980 »

Here we go then

18 month old split my shin bone from the top to bottom falling down thwe bottom two stairs had to have a full leg cast which i pulled off so had to have another one on with my leg bent.

12 broke my left wrist playing football (soccer) in the school play ground.

14 snapped the two bones in my right arm near my wrist had to have a metal plate put in which was removed 2 years later.

21 fell of and in between 2 434's when working on them my army helmet got jammed and nearly chocked me left a bruise round my neck not fun at all

23 fell of a 40 meter mast in N. Ireland cut my leg not to bad but bad enough 10 stitches.

23 again up a mast and got shot at so quickly got down and sprained my ankle badly.

25 now out of the army was at work and got a pain in my chest drove home from Manchester about 1hr 30 mins got home tried to shrug it of but my wife took me to the hospital an found out my lung had collapsed it can happen if you are tall skinny and young.

29 good Friday woke up with bad stomach pains my wife was pregnant at the time and was going into labour we both went to hospital for me to find out that i had appendicitis got some pain relief made it too my wifes side for the birth at 20:10 hrs and belle was born and had my appendix out the next morning.

touch wood not done anything for a while.
http://www.youtube.com/channel/UCy-TGcs5u_ZXSZ9kObNfsPg


On the go at the Mo

Quite a few :banana:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Modelling injuries

Post by Coen »

HOLY CRAP Nigel... I'm a big baby compaired to this...
I'm going to go outside right now and smash myself in the hohos with a hammer :bash: then set myself on fire again :boom: just to feel like a man again. :eeek:
haha.
WOW.
Dude... crazy. :crazy:
User avatar
Nige201980
Captain
Captain
Posts: 4095
Joined: Wed Jun 05, 2013 9:30 am
Location: Doncaster South Yorkshire UK
Contact:

Re: Modelling injuries

Post by Nige201980 »

You could say that mate but i tend to mend quickly most of the time.
http://www.youtube.com/channel/UCy-TGcs5u_ZXSZ9kObNfsPg


On the go at the Mo

Quite a few :banana:
User avatar
PhildaFish
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1087
Joined: Wed May 29, 2013 7:08 pm
Location: Somerset, England
Contact:
Great Britain

Re: Modelling injuries

Post by PhildaFish »

This is turning into that scene from Jaws when they compare scars! Ok, this'll take some explaining - I was putting some broken glass into a recycling bank, the ones with the small round hole, and I went to put a large 4 pointed shape (about 6" from top point to bottom point and about 18" from side point to side point) in there but it stuck on the top and bottom point so I put it back in the wheelbarrow and threw another piece into the hole. It was when I put another piece in I noticed red paint all down the front of the bottle bank and though it rather odd. I threw another bit in and saw more red splash all down the front and realised it was blood, MY blood! When I looked at my right arm it was covered from fingertips to elbow and all down the side of my white t-shirt but there was no pain. I went back in the house (the recycle bank was in my pub's car park) to wash it all off and found 2 small cuts where the large piece of glass had gone through the palm of my hand and out the back - I hadn't noticed that my grip had slipped when it stuck in the hole!
Please visit my website
Image
For instructions, historical paint charts & paint conversion charts.
Please like Scale World's Facebook page.
My Facebook page.
Post Reply

Return to “Modelling Chat”