Ism Friday's night live at the bench what have you been working on for *August 24th*

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Kingdan »

Image
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, August 24th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.
User avatar
MakingModels
Staff Sergeant
Staff Sergeant
Posts: 179
Joined: Tue Apr 11, 2017 8:10 pm
Location: Aberdeenshire, Scotland
Contact:
Scotland

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by MakingModels »

AMT Anakins Pod Racer..

Moving house in under 2 weeks so not much time for the bench or Hangouts..

The few moments I have had I have finally managed to finish the Pod Racer..

Mostly painted with Tamiya colours, with a little Kit Kat action on the engines.. :)

The base was rather boring so added a little Scenery..

Nice kit to put together, after I stripped it all down and removed the paint from the owners original attempt to build and paint it 17/18 years ago. :crazy: :wtf:

Thanks for taking a look and I hope you like it

Karl

Image
User avatar
Novorus
Master Sergeant
Master Sergeant
Posts: 401
Joined: Mon Jul 06, 2015 5:03 pm
Location: Hertfordshire
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Novorus »

Well Mathew this week i wanted to fit the windows in to ye olde church.

Made by myself using acetate and images for the internet and works printer. :whistle: :whistle: The background is a mock up of what's to come in the next stage (Karl is a whiz don't you know). Thanks for your support from you all and of course Graeme for his weekly shout outs.

The link to the build series on the Youtube channel happens to be in my signature on the forum, Just saying :D :th:

Image
James
https://www.youtube.com/channel/UCZnEdt ... s3LTfQW4Eg Remember like, share and subscribe
Remember the 20th March 2020 is the Model Officer Mess birthday bash, come and join in."Fokker's Foe's"
https://www.facebook.com/groups/217021638777483/
F27pax
Sergeant
Sergeant
Posts: 136
Joined: Mon Jun 18, 2018 2:52 pm
Australia

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by F27pax »

After those two magnificent examples of modelling skill I'm almost embarrassed to present this little model, a modest achievement in comparison. It's the Airfix 1/144 Boeing 737-200 decked out in the colours of 'L'Aeropostale'. The white is Tamiya TS-26, the leading edges are Tamiya TS-83 (both decanted of course), the grey on the wings is Boeing Grey concocted for my by the local automotive paint shop, based on Xtracolor Boeing Grey, and the corogard panels come from my last tin of Xtracolor Corogard (which is no longer being imported into Australia and which Hannants can no longer send me - a real bugger). The window and door decals are from Draw Decals, the airline decals are by Flightpath but they tended to go off like a 100kg fragmentation bomb and made me go grey before my time. I also stole some decals from an Oldmodels 737-200 decal sheet and will have to buy another one so I can complete my next 737. Cheers!

Image
Kempy84
New Recruit
Posts: 1
Joined: Fri Aug 17, 2018 7:25 pm
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Kempy84 »

Evening crew, this is my first ISM post. I have just finished the 1990's iconic Lamborghini Diablo VT by Revell in 1/24.

Primed in Ultimate white primer, painted in Lamborghini Rosso Arancio Orange from Zero Paints then clear coated with Zero Paints 2K Diamond finish.  The interior and other parts were painted with Tamiya acrylics. Wheels and engine were painted with Alclad metal paint.

I had to sand and polish it to get out some damn dust but overall happy with the finish of this very cheap kit which I really enjoyed putting together.

Image
Last edited by Kempy84 on Fri Aug 24, 2018 2:33 pm, edited 1 time in total.
User avatar
onemac
Sergeant First Class
Sergeant First Class
Posts: 317
Joined: Sun May 15, 2016 6:24 pm
Location: Lossiemouth, UK
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by onemac »

This may be amongst the longest running builds in the history of ISM Friday Night Live - 1/72 M&S rebox of the Revell Lancaster Mk. 1/3 (see what I did there Dan?)
Anyway, did some faffing about with Ultimate washes mixing some and using others straight. Wasn't worried so much about the camo but the black proved pretty naff to weather so the next stage was weathering with oils. Wow, just the effect I wanted :dance:
My Brother-In-Law, who captained the BBMF Lanc in the 90's, cautioned me that the exhaust stains coated the upper wings except from the outer exhausts and that I was not UNDER ANY CIRCUMSTANCES to weather the outers. So here's the current state - pretty much done with just the fiddly bits to add. Could we see a finished model next week?

Thanks for looking.

Image24_08_2018 by Alan MacNeish, on Flickr
Currently on the bench:

1/32 Tamiya F-15E Strike Eagle
1/48 GWH T-33 Shooting Star
1/48 Revell (Monogram) F-15C Eagle
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Paul »

Tamiya 1/24 Sierra RS500 (Tim Harvey)

Primed in Ultimate Modelling Products White primer
Painted in Zero Paint "Labatts Blue"
Sk Decals "Labatts" decal scheme
Clearcoated in Pro-range 2k
Ultimate modelling Products Apex Airbrush used for everything.

Fabric belts were added to the interior

Given a Novus Polish and then a Tamiya wax :)

Image
Black73Cat
Sergeant
Sergeant
Posts: 154
Joined: Wed Mar 08, 2017 12:22 pm
Location: Sherwood Forest
Contact:
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Black73Cat »

Takom Meillewagon V2 & SS100 Hanomag

Sub assemblies all complete apart from the wheels, which I'll be working on during tonight's show.

No issues with the kit at all until I came to join top and bottom of the tractor together. Needed some trimming to make it fit.

All ready for a coat of Black Ultimate Primer

Image
Graeme Pearson
Started modelling March 2017...learning all the time.

YouTube
Www.YouTube.com/Black73Cat
I'm on Instagram as Black73Cat_Models
https://instagram.com/black73cat_models
User avatar
Andreas
Staff Sergeant
Staff Sergeant
Posts: 185
Joined: Sun May 04, 2014 4:37 pm
Location: Sarpsborg Norway
Norway

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Andreas »

The kinetic mirage 2000 D is now done.
The kit was ok, but needed a few bits of aftermarket .
Wheels , engine and the refueling plug got upgraded with resin and metal bits.

Eduard PE in the cock-pit.

The ordinance needed a bit of sculpting to look convincing.
By checking references I found that there were a few mistakes in the instructions,
But is was easily sorted by swapping around bits on the dorsal . Image
On the bench:
- Stuff!


I love lamp!
TheMullet
New Recruit
Posts: 1
Joined: Fri Aug 24, 2018 4:34 pm
England

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by TheMullet »

Hi guys thanks for the add and my new airbrush😀

here is my take on the tamiya panzer ii ausf F. when i got this model i found a reference photo of one burned out and i had never tried that type of build before so i thought i would give it a try..

for the tank i primed the model in Ultimate white primer then apply a base colour of burnt umber to the model. i then used the ak range of rust effects to build up the different layers of rust and burnt looks. to finish the model i used the hairspray technique with the main colour of german grey by tamiya. brushing off most of that colour to give me the peeling effect of the paint from the fire.i then used humbrol weathering powders to add an ash effect to the commander hatch and the engine bay.

i built a diorama base using plaster Paris and then used some molds i had to create the broken walls. the paints i used was the ak range of rust effects with humbrol weathering powders to achieve an ash effect.

hope you guys like it.

thanks ricky
Image
User avatar
NormanD
Corporal
Corporal
Posts: 71
Joined: Fri Sep 16, 2016 5:33 pm
Location: Newcastle
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by NormanD »

Mixed bag this week, preparation work continues on the
1/16 Takom Type 94 (ready for primer stage)
1/35 Dragon BDRM-2 (ready for primer stage)
1/35 Trumpeter PLA ZBD-86D finishing work, ready to go to primer with the other two.

Image

You might also notice, I bought a new cutting mat too :nena:
AdamChallinger
Private First Class
Private First Class
Posts: 27
Joined: Wed Nov 02, 2016 3:34 pm
Location: Kent
England

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by AdamChallinger »

Got the tamiya 1/24 Calsonic GT-R finished this week. I used the tamiya detail set and added fabric belts. Ultimate White primer, Zero paints calsonic blue, MIPA clear coat. Amazing kit, highly recommended if you can find one. Onto the next calsonic, 4 down, 5 more to go...

Image
User avatar
TommyKillander
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2776
Joined: Sat Dec 27, 2014 1:59 pm
Location: Gothenburg, Sweden
Sweden

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by TommyKillander »

Hey Guys!

FInished my Revell 1/144 B2 Spirit for the Bomber SiG this week.

It was painted with a mix of Gunze H305 (FS36118) and Tamiya XF-24 Dark Grey. I made my own paintmasks using my Silhouette Portrait and replaced the kit decals with Begemot aftermarket decals.

Image

:cheers2:
Tommy
User avatar
Timplastic
Sergeant Major
Sergeant Major
Posts: 648
Joined: Thu Oct 09, 2014 7:29 am
Location: French quarter
Contact:
UN

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Timplastic »

Again a non productive week. But hey its not as bad as this persons week. Wheel not holding pressure ? should check the valve Image
I like to know what you think even if it is critique , If you spotted it let me know
Trying to finish what I started, and take part

My youtube channel that needs some updates
https://www.youtube.com/channel/UCjQvLz ... subscriberImage
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by Kingdan »

Still this
Image
User avatar
AlexBB
Sergeant First Class
Sergeant First Class
Posts: 275
Joined: Tue Jan 02, 2018 11:03 am
Location: Clangerland, Nr Walsall, West Mids
Contact:
England

Re: Ism Friday's night live at the bench what have you been working on for *August 24th*

Post by AlexBB »

Productive week... Models are in there somewhere!!!

Still packing ready for the big move... Roll on new Man Cave :D :D

Image
You do not have the required permissions to view the files attached to this post.
Alex J Beebee
On The Bench ... Italeri 3635 Willys MB Jeep - Parked!!! 3 x Airfix A68214 Mary Rose starter kits for an Xmas diorama thingy!!
Post Reply

Return to “Modelling Chat”