Ism Friday's night live at the bench what have you been working on for *September 28th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, September 28th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[F27pax]

Good evening gentlemen. Tonight’s offering is the Doyusha 1/144 Fokker F-27 in the colours of Airlines of New South Wales as they appeared in 1967. The primer was Tamiya grey primer, major top coats are Tamiya Pure White and TS-83. There are five different metallic shades on the engines (but I didn’t keep track of them). The decals are from Hawkeye. This is the fourth and final of the set of Australian second level airlines F-27-200s, there will be an East-West Airlines F-27-500 when the kit arrives from Welsh Models.

[Twokidsnosleep]

A Tail of Two Planes. 1/32 Wingnut Wings SE5a’s
The kit has two fuselages in it, so I am trying to make two planes by using spare parts and scratching stuff up
The left one is the full kit in Ultimate Gelb primer and painted in acrylic paints
The right one is the extra one and is brushed Windsor and Newton Oils and will be all oil paints.
It’s engine is from a Roden Viper engine kit.
Two fuselages are provided in the kit as one has wrinkled sides and one has smooth sides.

Cheers guys, busy work Friday for me

[NormanD]

Takom 1/16 IJA Type 94

Yes folks, your eyes are not deceiving you, I actually managed to get the Tankette into Ultimate Oxide primer this week and not "back in it's box", this is like one of them episodes of the "Twilight Zone" , jokes aside, I'm enjoying this kit immensely. Now onto the next stage, which is of course, "back in it's box" I mean painting with the Hataka orange line = Lacquer range IJA paint set.

[sheppy]

Hi all its Southport steve this is the engine for my 1/24 fujimi AC Cobra painted using Ultimate primer, various alclads and various vallejo paints.
DSCN3927[1] by Steven Shepherd, on Flickr

[js1714]

Greetings Slaves to the Plastic and fellow fumblers. Breaking news,,,i'm still on this one,,,This week contrary to "Fake News" we continue with the MENG 1:35 "Achzarit" (Wicked Female). Grab handles, metal side skirts have been fitted and painted,,A few more bits to be done and she will be complete,,.Maybe this week eh..Model on..Dan....to the Arena,,!!

[bfrd]

I have been working on my 1967 Chevy Impala SS. It is in 1:25 scale by AMT. The aftermarket wheels are by Pegasus in two different sizes; 23 for the rear and 19 for the front. I lowered the front end by cutting off the stock mounting lug and drilling a hole further up. The body was primed in Ultimate grey. The color coat is Pearl Red from Zero Paints. The clear coat is ZP Diamond 2K. All chrome parts were stripped with NaOH and then primed with Ultimate Gloss Black. Once primed they were painted in Black Chrome from Alclad. All of the trim on the car is also Black Chrome. Still have the interior to finish, but with some assistance with blu-tac here she is.

[ElCapitan]

Not a lot done since last week. Ultimate winter wash on my Zvezda 1/35 Panzerjager 1.

[Wolfgangtheseal]

Revells 1/72 B17G. build thread on the forum. riviting copied as best i could from the hk 1/32 b17 sprue shots. painted with AK extreme metals and alclad with mr color for the normal paint. fun kit.

[TommyKillander]

Hey Guys!

This is my first car build so basically I have no idea what I'm doing

Finished the engine for my AMT 1/25 Dodge Charger R/T.
Engine is painted in my own mix of X-6 Orange and X-7 Red, to get something that might pass for Chrysler Engine Red
Rest of the engine is painted with Vallejo Metals and Ultimate Black and Gloss Black primers. I did some detailing with solder wires.



Tommy

[onemac]

Airfix 1/48 Canberra B2 - more trenches than WW1 That is all.

Wings_Sprye_Glue_01 by Alan MacNeish, on Flickr

[Kingdan]

I'm still working on the revell 1/24 cobra thinking of using the cover now as I like the contrast against the blue

[Black73Cat]

More progress on the Takom V2 this week, though modelling time has been scarce.
Got the majority of weathering done on the tractor though the "Light Dust" pigment that I applied last night, has dried a lot lighter than I expected...I'll darken it later!

Weathering done using Ultimate earth wash, some Abteilung oils, MIG panel washes, streaking Grimes and pigments.
Also used Micro Scale Industries Masking Fluid with success...for the first time!

This will be finished in a day or two, then I'll be having a go at sitting it on some sort of diorama base.

[Timplastic]

Primer is down on the Eduard focker D.vii
Also pictured here is the gas patch resin machine guns that will be added