Ism Friday's night live at the bench what have you been working on for *june 7th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, June 7th**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.

[AndrewR]

Hello everyone, I finally managed to paint the body panels recently and I also did a quick dry fit to see how it looks and take some pictures. I also added some decals I initially missed in the interior and added some carbon fiber decal on the main back intake (no idea if that's how it's called). This car has so many interesting angles, it's really hard to pick the best picture to show it off.
P.S: I picked this pic because I know Dan enjoys the arse on this specific car )

[Hawkmoon]

Finished my three 1/24 Mazda wankel powered builds The 1st, The last and the Winner .Comprising of the Cosmo, RX8 and the 767B twentyfour hour race winner. Zero paints Mazda colours used and Zero Diamond 2 pack clearcoat used to finish.

[Twokidsnosleep]

HI everyone
New project this week is a Williams Renault FW19 F1 car
This car won the World F1 Driver Championship for Canadian Jacques Villeneuve and Constructor’s Title for Williams in 1997
Revell 1/24 kit, Ultimate blacks , body to be Tamiya decanted TS-15 and Ultimate white, likely paint the red/gold Rothmans livery and I have the additional Rothmans decals.
Cut open the engine cowling and attached 1mm magnets in opposing sides to let it click back into place
Have a good weekend all, I am working again so may be in and out for the show so happy weekend

[RancherDan]

Almost done with the 1960's 1/24th scale VW samba bus, used some flocking for the carpeting and seat tops, tamiya and model master brush paints for interior and metal flake blue and pearlized green for the body.. I will use some nice 15's scale chrome wheels and tires from the spare parts bin because I don't like the stock V-dub rims and my other aftermarket 21's scale custom rims are too big to fit without drastic body work that I am not willing to dive into on this kit.

[onemanclapping]

Evening Dan and ism crew.
I have been working on 2 projects this week.
1/24 Tamiya Subaru Impreza WRC 99
primed in Ultimate White primer
painted with zero paints subaru blue
decals laid down with Ultimate decal solutions
cleared with pro range 2k clear

[Tomcat64]

This week I've been progressing with my 1/35 Meng Jagdpanther. Aside from a self-inflicted acetone related incident with the rear deck the build has been going well. On the plus side following the aforementioned incident I'm happy to say that Meng customer service have been very responsive and helpful in the face of my overwhelming stupidity and a replacement sprue is on its way. The fighting compartment roof has been dry fitted so that the vision ports can be added once main painting is done.

[F27pax]

G’day happy modellers?

Tonight we have a partially completed Qantas Airfix 1/144 Airbus A.300. The white is Tamiya Pure White, the red is Tamiya Italian Red, the leading edges are Taimya TS-83 (all decanted, of course) and the grey is my own Airbus grey. The decals are from Hawkeye and the fact that I’ve made a total balls-up of applying them is my fault, not theirs. Fortunately for me Hawkeye will have a stand down at Model Expo in Melbourne this weekend so I can get some replacements. I can also get from them the Australian Airlines decals for the A.300 in the background.

Keep smiling, even when you’ve completely stuffed up expensive decals.

[Paul]

Finished the Tamiya 1/24 Mercedes Promarkt C Class. Nice kit but showing its age

* Primed in Ultimate White primer
* Sprayed in Tamiya Ts-16, decanted, thinned and through the Ultimate Apex Airbrush @ 20PSi
* Shunko Decals , laid down with Ultimate Decal Solutions
* Pro Range 2k Clear, 1 tack coat and two wet coats
* Wheels Sprayed in Tamiya Ts-14
* Flated with 12000 Micromesh
* Polished with Novus Compounds

[Tay99]

Hi all hope you having a good Day.

This is the Beemax McLaren mp4/2 driven by Nikki Lauda.

I used beemax and hobby design upgrade parts for this build.
The car was painted with zero paints and zero 2k for the gloss coat.
Alclad paints were used for the metal parts and Alclad smoke was used to tone down the carbon fibre on the front of the monocoque.
This is a great kit that goes together well.

Have a great weekend everyone.

[Dragdy]

Hi All
Below planes with their caddies. Catapults and crane. they will be mounted on my IJN Yamato in 1:700 scale. Kit and the photoetched extras made by PitRoad.

[Wolfgangtheseal]

This is the Academy 1/35 AH-1Z, painted with AK real colors and weathered with oils,

[onemac]

1/32 Kittyhawk Bronco saga.... blah! Blah!

Don't have a scoobie where I got to last week but Ultimate mix of Dark Dirt and Concrete wash applied and removed panel by panel (inside only leaving the panel lines) with a cotton bud Cleared with Aqua Gloss and weathered with Abteilung oils - whatever colour and mix took my fancy (but mainly black/brown/yellow). Canopy masking started and there we go.

[JonMW]

Managed to finish this Hobby Boss 1/48 Sukhio SU-27 Flanker this week. It's a pretty nice kit, only added a resin seat from Quickboost and some resin wheels that I 3d printed from a model I made. I'm not 100% happy with the finish, had some problems with the paint peeling when I removed the masking. But overall it was a fun build.

[Claire]

Hi everyone

Primed parts on my Tamiya Espon NSX build with Mr Hobby - Mr Surfacer 1500 Black & White
Did some spoons - then spent most of the week responding to people on Facebook

[Newbinob]

Tamiya 1/12 SUZUKI RG 250 F,
This kit was a nice build from the off.
Primed in Ultimate White,
Painted in Tamiya's X2/4/5, X7, X11, X18, X26/27, XF1/2/3, XF7, XF16 & XF56.
Clear coated with Alclad II, Decal's Apply'd with Ultimate Decal solution's normal & strong + Micro set.

Image219.jpg