Ism Friday's night live at the bench what have you been working on for *January 10th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, January 10th**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.

[onemanclapping]

Hi Dan and all ISM crew
Finished my Tamiya 1/24 Mitsubishi Lancer Evo Vii WRC
* Primed with Ultimate White Primer
* Painted with decanted TS49
* Decals laid down with Ultimate decal solutions.
* Cleared with ProRange 2K (all using the Ultimate Apex)
* Polished with polishes
lovely kit to build but me being a ham fisted buffoon made a few mistakes here and there.

[Paul]

Tamiya 1/24 Toyota Supra GR, out the box video build

* Primed in Ultimate Grey Primer
* Base painted a 3:2 mix of Tamiya LP 41 and 45 blues
* Gravity 2k Clearcoat (Spain)
* Polished with Polishes
* Interior and all other parts painted with Tamiya LP paints
* Ak Extreme metals used through out
* All through the Ultimate Apex airbrush

[Hawkmoon]

KittyHawk 1/48 UH-1 D "Huey"

My first KittyHawk kit and it went together well the only thing I did find that tabs sometimes needed to be thinned to fit into a couple of holes would I build another kit from KittyHawk the answer is yes.

Paints used-
Ultimate black primer
Alclad aircraft aluminium
Neutral grey for the interior
AK olive drab base and highlights
Final coat was a was 75/25% mix of sepia and red washes to create some highlights and recreate the red dust/mud of Vietnam that everything got covered in.

PC315650 by andrew purchase, on Flickr

[DarrylMasters]

Hi guys, hope all well

Airfix 1:24 Grumman Hellcat in the 1945 USS Randolph scheme

Primed and painted all in Vallejo primer and model air Glossy Sea Blue

Interior done in Vallejo Int.Grey Green
Engine done in Vallejo metals / steel / aluminium
light weathering with vallejo environment engine oil
Using my iwata HP-CS 3.5mm needle

Extras
Airscale Cockpit
Airscale levers and dials
Brass wiring on engine

have made loads of mistakes and torn decals but shrugged my shoulders with a smile and a frown learned and moved on

Still loads to do working on the under carriage and weapon load out items, flaps, bombs (done) but list goes on

Hellcat.jpg

[Novorus]

After quite sometime with a lack of Mojo, jumping in with the Revell Colonial Viper Mk VII and Just a bit of PE from GreenStrawberry for a group build in the Mess. #final-frontier.

Happy Modelling

[KalebB]

Finished my T-34/76 winter wash build today.

Tamiya T-34/76 1/35th scale
Second build since coming back to the hobby, I think I may have did an alright job

[F27pax]

Good evening happy modellers

There’s nothing completed this week because I’ve been dividing my loyalties between kits. So, fresh from the paint booth with a coat of Tamiya rattle can grey primer is the Minicraft 1/144 MD83 on the left and a Revell 1/144 Airbus A.320 with a coat of Tamiya TS-83 on the leading edges on the right. Hopefully one will be completed by this time next week.

[JifJaf]

Evening ladies, gents and the live crew too.
This week I have not had much modelling time but I have been fiddling with a 1/72 Hobbyboss Mi-24V Hind and a teeny wee 1/144 Brengun X-Craft midget sub.
My little chopper (easy Dan) is primed and almost ready for paint, the sub has been base coated and is ready for some weathering. Good night all.

[DanEdmans]

Hi Dan, this week I finished my 1/24 Aoshima McLaren F1 GTR EMI.

Great kit for the money. Loads of detail, fits as it should, carbon and Cartagraf decals. Built out the box bar the seatbelts.

Ultimate Gelb, Black and White primers.
Tamiya TS-8 decanted for the body.
Mr Color C-4 for the wheels, boot spoiler and wing mirrors.
Tamiya Panel line accent black where needed.
Tamiya LP paints for pretty much everything else.
Tamiya LP-9 barrier coat to stop paint bleed through on the decals (cheers Paul).
Ultimate decal solutions.
Splash 2k.
Novus polish and Tamiya Wax.
Ultimate Apex with both 0.2 and 0.35 needle sets.

Have a great show and a wonderful weekend everybody.

[RocketSurgeon]

Evening Gentleman,
Since I'm also very untalented, I thought it was time I tried my hands on a car model (wink wink, nudge nudge).
It is a Platz/NuNu/Beemex/NuNu/Platz/Whatever BMW M6 GT3 kit. I saw these kits in Paul's cave tour video and I just had to order one.
The rewievs were right, this is not a Tamiya kit... I had to remove a suprising amount of flesh and heavy seam lines. After cleaning up the tail, the rear headlight openings became too large for the clear parts. I had to use plastic card shims to fill the gaps (still a work in progress). The seams around NACA ducts will need a lot of filling and sanding too.
I'm not good at making shiny things and I'm terrified of large decals so this one will most likely end up on the shelf of doom or in the bin, but I'm enjoying the build so far.



P.S.: As a 'Merc guy' with a BMW on the bench I was obligated to buy a Mercedes kit as well.

[Tat2bhoy]

Started building the Specialnavy 1/72 U-boat type IIA with the after market Accurate Model Parts upgrade set.
Doing the tedious task of fitting the new photo etched flood holes