1/32 Lancaster B Mk I/III

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

1/32 Lancaster B Mk I/III

Post by RangerNeil »

If anyone is interested - and has a LARGE display space available - Border Models are releasing a 1/32 Lancaster with full interior just after Xmas. Apparently it will be released in small batches with long periods between batches.

https://www.bordermodel.com/en/Newprodu ... s/335.html
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    BigWall
    Chief Warrant Officer 5
    Chief Warrant Officer 5
    Posts: 2961
    Joined: Sun Mar 15, 2020 11:44 pm
    Location: Denver, Colorado
    United States of America

    Re: 1/32 Lancaster B Mk I/III

    Post by BigWall »

    MAN OH MAN! That looks like a beautiful kit!
    Joe

    Image
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: 1/32 Lancaster B Mk I/III

    Post by digger303 »

    Pre-order at Lucky models

    600 USD plus 65 to Australia. :(
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    BigWall
    Chief Warrant Officer 5
    Chief Warrant Officer 5
    Posts: 2961
    Joined: Sun Mar 15, 2020 11:44 pm
    Location: Denver, Colorado
    United States of America

    Re: 1/32 Lancaster B Mk I/III

    Post by BigWall »

    Yikes!
    Joe

    Image
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: 1/32 Lancaster B Mk I/III

    Post by Stokesy44 »

    If I had children I'd sell them! :th:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: 1/32 Lancaster B Mk I/III

    Post by Stokesy44 »

    It’s the Wing Nut Wings kit. Border must have bought the moulds
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    RangerNeil
    Major
    Major
    Posts: 4745
    Joined: Fri Jul 12, 2019 9:42 pm
    Location: Dagenham
    Contact:
    Great Britain

    Re: 1/32 Lancaster B Mk I/III

    Post by RangerNeil »

    digger303 wrote: Wed Sep 29, 2021 12:44 am Pre-order at Lucky models

    600 USD plus 65 to Australia. :(
    That comes in at £440.20 in UK terms. I would think as well as the hefty price you are going to need a LOT of space to display it. Wing span alone is nigh on 3 times that of a Spitfire in the same scale!!
      Neil (yet another one...)

      On the board now:

      Airfix 1/35 Alvis Stalwart Mk2 FV622
      Hasegawa 1/48 A8 Crusader

      Scalemates stash info
      =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: 1/32 Lancaster B Mk I/III

      Post by digger303 »

      RangerNeil wrote: Wed Sep 29, 2021 8:31 am
      digger303 wrote: Wed Sep 29, 2021 12:44 am Pre-order at Lucky models

      600 USD plus 65 to Australia. :(
      That comes in at £440.20 in UK terms. I would think as well as the hefty price you are going to need a LOT of space to display it. Wing span alone is nigh on 3 times that of a Spitfire in the same scale!!
      Nail it to the roof.... ;)
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      BigWall
      Chief Warrant Officer 5
      Chief Warrant Officer 5
      Posts: 2961
      Joined: Sun Mar 15, 2020 11:44 pm
      Location: Denver, Colorado
      United States of America

      Re: 1/32 Lancaster B Mk I/III

      Post by BigWall »

      Stokesy44 wrote: Wed Sep 29, 2021 7:22 am If I had children I'd sell them! :th:
      They're not worth as much as you would think they are!

      :D :D :lol: :lol: :doh: :doh:
      Joe

      Image
      User avatar
      RangerNeil
      Major
      Major
      Posts: 4745
      Joined: Fri Jul 12, 2019 9:42 pm
      Location: Dagenham
      Contact:
      Great Britain

      Re: 1/32 Lancaster B Mk I/III

      Post by RangerNeil »

      OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
      Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!! :lol: :lol:
        Neil (yet another one...)

        On the board now:

        Airfix 1/35 Alvis Stalwart Mk2 FV622
        Hasegawa 1/48 A8 Crusader

        Scalemates stash info
        =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
        User avatar
        digger303
        General
        General
        Posts: 16667
        Joined: Mon Mar 16, 2015 10:01 am
        Location: Western Australia
        Australia

        Re: 1/32 Lancaster B Mk I/III

        Post by digger303 »

        RangerNeil wrote: Sun Oct 10, 2021 12:51 am OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
        Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!! :lol: :lol:
        BRAVE OR FOOL HARDY are the words springing to mind..... :lol: :lol: :lol:

        Buying this kit though my hat goes off to you..... :clap: :clap: :clap:
        It will take a year to build it so definitely a longer term project and it'll need some minor upgrades I'm sure. How could you not on what would be the best kit in my stash just out of respect for the quality if for no other reason.
        :bow:: :bow:: :bow::
        :cheers2:
        Listen and appear wise
        Image
        Image

        scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
        Image
        User avatar
        Twokidsnosleep
        General
        General
        Posts: 18481
        Joined: Thu Aug 07, 2014 4:07 pm
        Location: BC,Canada
        Canada

        Re: 1/32 Lancaster B Mk I/III

        Post by Twokidsnosleep »

        RangerNeil wrote: Sun Oct 10, 2021 12:51 am OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
        Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!! :lol: :lol:
        We are brethren, did the same on Thursday morning from Ammo
        In case you missed the shite I got about it on the live show :shock: about me needing my bumps felt :think:….I ordered one as well
        My thinking is this:
        If I don’t build it I can sell it
        If you don’t order now, you may not find one or will pay far more later . Pocher kits are a good example of that
        I can sell things from my stash I have lost interest in if need the $
        My F’ing hobby, my f’ing money, get bent those that don’t like it
        I can do or watch other things on Fridays
        Scott

        On, Under or near the desk
        Mr Tamiya Memorial build...Alfa Romeo Bt-46
        User avatar
        digger303
        General
        General
        Posts: 16667
        Joined: Mon Mar 16, 2015 10:01 am
        Location: Western Australia
        Australia

        Re: 1/32 Lancaster B Mk I/III

        Post by digger303 »

        Twokidsnosleep wrote: Sun Oct 10, 2021 2:29 am
        RangerNeil wrote: Sun Oct 10, 2021 12:51 am OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
        Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!! :lol: :lol:
        We are brethren, did the same on Thursday morning from Ammo
        In case you missed the shite I got about it on the live show :shock: about me needing my bumps felt :think:….I ordered one as well
        My thinking is this:
        If I don’t build it I can sell it
        If you don’t order now, you may not find one or will pay far more later . Pocher kits are a good example of that
        I can sell things from my stash I have lost interest in if need the $
        My F’ing hobby, my f’ing money, get bent those that don’t like it
        I can do or watch other things on Fridays
        I don't watch that show besides chewing up my limited data and speed problems. I find it a bit of a waste of time...3.5hrs is a long time. My words are "Damn them all and do as you want" if the wife says it's OK... :lol:
        I can't fault your thinking and it may end up being a good investment. I'm :mrgreen: of anyone who secures one and thats not because of the aircraft more from the size and detail included. It looks very complete and will be a absolute stand out in any display.
        :th: :th: :th:
        :cheers2:
        Listen and appear wise
        Image
        Image

        scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
        Image
        User avatar
        RangerNeil
        Major
        Major
        Posts: 4745
        Joined: Fri Jul 12, 2019 9:42 pm
        Location: Dagenham
        Contact:
        Great Britain

        Re: 1/32 Lancaster B Mk I/III

        Post by RangerNeil »

        Oh - this is going to be built (in between all the Hinds....). Only concern - other than being around long enough to finish it - is where the hell to put it! Which, funnily enough, was one of the wife's more strident demands. Apparently quoting the famous line from Babylon 5 "faith manages" was entirely the wrong answer.... :lol:
        I managed to mollify her a bit by telling her I am going to build it as a tribute to my Uncle Les who was a tailgunner on Wellingtons and Lancasters. Be nice if someone would release flight or ground crew figure in 1/32 by the time the kit gets released - it would make for one hell of a diorama

        Apparently the size concerned the manufacturers too so the outer wings can be left off for display/transport purposes? Other than this - an excellent coffee table interior?
          Neil (yet another one...)

          On the board now:

          Airfix 1/35 Alvis Stalwart Mk2 FV622
          Hasegawa 1/48 A8 Crusader

          Scalemates stash info
          =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
          Garion77
          Warrant Officer
          Warrant Officer
          Posts: 1386
          Joined: Fri Jul 08, 2016 2:15 pm
          Location: Terrebonne, QC, Canada
          Canada

          Re: 1/32 Lancaster B Mk I/III

          Post by Garion77 »

          As some of you as already said it's on preorder in a few places. Saw it from a store I order from sometimes for 1100 $ CAN
          so that's 645 in UK dollars or 875 in US.... and shipping should be quite expensive considering the size of the box. It was said it should be out for delivery to distributors by the end of February. so may be the situation with Mr Jackson as been settle.
          Francis

          Image


          At the bench
          Tamiya's 1/72 F-16 and 1/48 Skyraider
          User avatar
          Twokidsnosleep
          General
          General
          Posts: 18481
          Joined: Thu Aug 07, 2014 4:07 pm
          Location: BC,Canada
          Canada

          Re: 1/32 Lancaster B Mk I/III

          Post by Twokidsnosleep »

          Garion77 wrote: Sat Jan 22, 2022 1:05 pm As some of you as already said it's on preorder in a few places. Saw it from a store I order from sometimes for 1100 $ CAN
          so that's 645 in UK dollars or 875 in US.... and shipping should be quite expensive considering the size of the box. It was said it should be out for delivery to distributors by the end of February. so may be the situation with Mr Jackson as been settle.
          Interesting . I looked the other day at the preorder and no update from Ammo
          It will come when it comes…probably right after I order my metal lathe :roll:
          Boy wife will be a yelling at me then :lol:
          Scott

          On, Under or near the desk
          Mr Tamiya Memorial build...Alfa Romeo Bt-46
          User avatar
          digger303
          General
          General
          Posts: 16667
          Joined: Mon Mar 16, 2015 10:01 am
          Location: Western Australia
          Australia

          Re: 1/32 Lancaster B Mk I/III

          Post by digger303 »

          HA ha ...Use afterpay or some equivalent then it's 4 equal smaller payments and might not attract the attention of your other half... :shifty: :shifty: :lol:
          :cheers2:
          Listen and appear wise
          Image
          Image

          scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
          Image
          User avatar
          cor
          Warrant Officer
          Warrant Officer
          Posts: 1532
          Joined: Sun May 23, 2021 10:34 am
          Location: Sydney, Australia
          Australia

          Re: 1/32 Lancaster B Mk I/III

          Post by cor »

          RangerNeil wrote: Sun Oct 10, 2021 12:51 am OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
          Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!! :lol: :lol:
          Classic
          User avatar
          Carles
          Private First Class
          Private First Class
          Posts: 41
          Joined: Tue Jan 25, 2022 2:23 pm
          Location: Barcelona
          Spain

          Re: 1/32 Lancaster B Mk I/III

          Post by Carles »

          Hi there !
          I´ve got mine´s from HK models already !
          Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
          Cheers !
          Carles.
          User avatar
          digger303
          General
          General
          Posts: 16667
          Joined: Mon Mar 16, 2015 10:01 am
          Location: Western Australia
          Australia

          Re: 1/32 Lancaster B Mk I/III

          Post by digger303 »

          Carles wrote: Wed Jan 26, 2022 3:30 pm Hi there !
          I´ve got mine´s from HK models already !
          Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
          Cheers !
          Carles.
          Cool, lets see some pic's.... :banana: :banana:
          :cheers2:
          Listen and appear wise
          Image
          Image

          scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
          Image
          User avatar
          RangerNeil
          Major
          Major
          Posts: 4745
          Joined: Fri Jul 12, 2019 9:42 pm
          Location: Dagenham
          Contact:
          Great Britain

          Re: 1/32 Lancaster B Mk I/III

          Post by RangerNeil »

          digger303 wrote: Thu Jan 27, 2022 2:01 am
          Carles wrote: Wed Jan 26, 2022 3:30 pm Hi there !
          I´ve got mine´s from HK models already !
          Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
          Cheers !
          Carles.
          Cool, lets see some pic's.... :banana: :banana:
          :cheers2:

          What Digger said!!! :cheers2:
            Neil (yet another one...)

            On the board now:

            Airfix 1/35 Alvis Stalwart Mk2 FV622
            Hasegawa 1/48 A8 Crusader

            Scalemates stash info
            =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
            User avatar
            Carles
            Private First Class
            Private First Class
            Posts: 41
            Joined: Tue Jan 25, 2022 2:23 pm
            Location: Barcelona
            Spain

            Re: 1/32 Lancaster B Mk I/III

            Post by Carles »

            Digger, Ranger...

            Will do it when arriving at home tomorrow. Promised !
            Probably posting the pictures of the unboxing process....

            Cheers!

            Carles.
            User avatar
            RangerNeil
            Major
            Major
            Posts: 4745
            Joined: Fri Jul 12, 2019 9:42 pm
            Location: Dagenham
            Contact:
            Great Britain

            Re: 1/32 Lancaster B Mk I/III

            Post by RangerNeil »

            Carles wrote: Thu Jan 27, 2022 12:53 pm Digger, Ranger...

            Will do it when arriving at home tomorrow. Promised !
            Probably posting the pictures of the unboxing process....

            Cheers!

            Carles.
            That will be interesting!! When the Border Models version ships it will be good to be able to see the two for comparison. How big is the HK box? Rumour says the BM version box is the size of a small suitcase.... :)
              Neil (yet another one...)

              On the board now:

              Airfix 1/35 Alvis Stalwart Mk2 FV622
              Hasegawa 1/48 A8 Crusader

              Scalemates stash info
              =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
              User avatar
              Carles
              Private First Class
              Private First Class
              Posts: 41
              Joined: Tue Jan 25, 2022 2:23 pm
              Location: Barcelona
              Spain

              Re: 1/32 Lancaster B Mk I/III

              Post by Carles »

              Hi Team !

              As promised, here are the pics of my new 1/32 Mk1 Lancaster as I received it !
              Yes, the size of the box and weight are considerable..
              Many parts lovely detailed inside and all them separated in diverse bags.
              What surprised me are the entire wing surfaces section in just one piece!
              I pre assembled both parts of the fuselage section with some tape to have an impression of how big it is compared to the Tamiya´s 1/48..

              [Image

              [Image

              [Image

              [Image

              [Image

              Have a great day !

              Carles
              User avatar
              digger303
              General
              General
              Posts: 16667
              Joined: Mon Mar 16, 2015 10:01 am
              Location: Western Australia
              Australia

              Re: 1/32 Lancaster B Mk I/III

              Post by digger303 »

              Wow it's as big as a small suitcase. The panel detail on the wings is impressive and engaging as the eye looks for more.
              Do you think a metal bar would be needed to stop wing sag at the wing roots and metal landing gear.
              Really nice buy...thanks for sharing.
              :clap: :clap: :clap:
              :cheers2:
              Listen and appear wise
              Image
              Image

              scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
              Image
              Post Reply

              Return to “Modelling Chat”