Compressor recommendations UK

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
CJSomerset
Sergeant Major
Sergeant Major
Posts: 722
Joined: Thu May 08, 2014 1:46 pm
Location: Somerset - UK
Contact:
Great Britain

Compressor recommendations UK

Post by CJSomerset »

My wife has decided that she would like to use my airbrush in her art studio, but unfortunately I always run it from my 200l work shop compressor. So I’d like to get her a small unit that’s not too noisy or expensive. Any suggestions will be greatly appreciated..
Some days it's not even worth chewing through the restraints!
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: Compressor recommendations UK

Post by RangerNeil »

I got mine from Amazon for under £100 - its a Feng-da and has served well for over 3 years now.
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    User avatar
    MrBowcat
    Command Sergeant Major
    Command Sergeant Major
    Posts: 828
    Joined: Wed Mar 15, 2017 3:34 pm
    Location: London
    England

    Re: Compressor recommendations UK

    Post by MrBowcat »

    I like Sparmax compressors, though they are a bit spendy.
    Si vis pacem, para bellum
    User avatar
    bfrd
    Site Admin
    Site Admin
    Posts: 1993
    Joined: Tue Aug 01, 2017 11:43 am
    Location: Carrollton, TX
    Contact:
    United States of America

    Re: Compressor recommendations UK

    Post by bfrd »

    I have a Hitachi (Metabo) air compressor and it runs well and quiet (compared to other compressors I have owned). I couldn't find it available on Amazon.

    Image

    https://www.desertcart.co.uk/products/1 ... anty-ec28m
    Matthew (or Bifford if you prefer)
    Stash
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Compressor recommendations UK

    Post by digger303 »

    CJSomerset wrote: Thu Dec 07, 2023 4:22 pm My wife has decided that she would like to use my airbrush in her art studio, but unfortunately I always run it from my 200l work shop compressor. So I’d like to get her a small unit that’s not too noisy or expensive. Any suggestions will be greatly appreciated..
    Can you not run a pipe to your wife's area with a 200l tank it could serve both of you and laying in some pipe would be way cheaper than buying a complete new compressor.
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    User avatar
    Tomcat64
    Brigadier General
    Brigadier General
    Posts: 7188
    Joined: Thu Sep 22, 2016 3:24 pm
    Location: Swindon, UK
    England

    Re: Compressor recommendations UK

    Post by Tomcat64 »

    MrBowcat wrote: Fri Dec 08, 2023 10:43 am I like Sparmax compressors, though they are a bit spendy.
    Same here - I've had a Sparmax 610 for a few years which I love.

    If you don't want to fork out for a new one I guess you might be able to find something 2nd hand or refurbed?
    Cheers, Neil

    On the Bench:
    Revell 1/72 Millennium Falcon - stalled due to stupidity
    Tamiya 1/35 Stegosaurus Stenops
    Tamiya 1/35 Sherman Firefly VC
    User avatar
    aur0ra145
    Second Lieutenant
    Second Lieutenant
    Posts: 3161
    Joined: Thu Jan 14, 2016 9:44 am
    Location: TX
    Contact:
    United States of America

    Re: Compressor recommendations UK

    Post by aur0ra145 »

    I got a cheap one off Amazon and it's lasted 7+ years at this point.
    User avatar
    CJSomerset
    Sergeant Major
    Sergeant Major
    Posts: 722
    Joined: Thu May 08, 2014 1:46 pm
    Location: Somerset - UK
    Contact:
    Great Britain

    Re: Compressor recommendations UK

    Post by CJSomerset »

    Thanks guys. I’ve got a local model shop that opened last year although I’m in there almost every week, I hadn’t realized that they kept a range of compressors. When I mentioned that I was after something quite he turned on an Albion Alloys and I was amazed at how quite it was. You can barely hear that it is running! Credit where due. Andy at scale model shed https://scalemodelshed.co.uk/ really does know his stuff. It was a little more than an eBay special but it seems to be fantastic quality.
    Some days it's not even worth chewing through the restraints!
    User avatar
    CJSomerset
    Sergeant Major
    Sergeant Major
    Posts: 722
    Joined: Thu May 08, 2014 1:46 pm
    Location: Somerset - UK
    Contact:
    Great Britain

    Re: Compressor recommendations UK

    Post by CJSomerset »

    digger303 wrote: Fri Dec 08, 2023 12:25 pm

    Can you not run a pipe to your wife's area with a 200l tank it could serve both of you and laying in some pipe would be way cheaper than buying a complete new compressor.
    :cheers2:
    Thanks. I hadn’t thought of that. It could be possible but the distance is about 30 metres so fixing in a permanent pipe would probably cost about the same as buying a small compressor..
    Some days it's not even worth chewing through the restraints!
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Compressor recommendations UK

    Post by digger303 »

    CJSomerset wrote: Sun Dec 10, 2023 1:30 pm
    digger303 wrote: Fri Dec 08, 2023 12:25 pm

    Can you not run a pipe to your wife's area with a 200l tank it could serve both of you and laying in some pipe would be way cheaper than buying a complete new compressor.
    :cheers2:
    Thanks. I hadn’t thought of that. It could be possible but the distance is about 30 metres so fixing in a permanent pipe would probably cost about the same as buying a small compressor..
    Not really if you did the work yourself and plastic air hose is cheap ..$50. All up cost would be around 100aud, but if you have to dig trenches, pull up pathways drill holes in walls, patching and the like a new compressor is a lot easier.
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Post Reply

    Return to “Modelling Chat”