Tamiya 1/12 FW14B

[okazaki0511]

Hello, this is my first time to post my model with here.

I used Tamiya's model with Top Studio set. About the cable, rivet, and clamping band, I prefer to use MFH's product.

Here is the progress so far.

Screenshot_20240318_142232_Photos~4.jpg

Screenshot_20240318_141934_Photos~2.jpg

[digger303]

WAY too real looking.

[cor]

Very nice work

[Twokidsnosleep]

Hi, welcome to the Forum
That is fantastic work!

[BigWall]

Amazing! Welcome to the board

[okazaki0511]

Update some progress.

The cockpit painting was finished, just wait a sunny day for the clear spray. I sharpened some corner and adjusted the thickness to make sure it looks like a real car. Also used a lot of carbon decals to improve the realism.

Screenshot_20240503_142324_Photos~2.jpg

Screenshot_20240503_142405_Photos~2.jpg

Screenshot_20240503_142421_Photos~2.jpg

[cor]

Nice work. Looks excellent so far.

[BigWall]

Very nice work!

[Garion77]

As mentionned before, way too real looking ! amazing job ! Paint job awesome and decals also. But Labatt is such a bad beer !!!

[okazaki0511]

Update some progress.

I made some modifications on the sidepod. I used the plastic plate to make some pattern and used paint thickness to achieve the gap of trench on the sidepod.

Screenshot_20240606_163038_Photos~2.jpg

Also polished the matt clear paint to hide the gap of carbon decals.

Screenshot_20240606_163018_Photos~2.jpg

Finally, I added a lot of parts and cables on it.

Screenshot_20240606_162914_Photos~2.jpg

[digger303]

Nice work. Looks excellent so far.

What he said.

[Twokidsnosleep]

Your model details are astounding

Can you come over and work on my 1:1 BMW’s electrics?

[okazaki0511]

Update some progress.
There is dotted line on the carbon fiber in the specific area. I used some clear pictures and model to calculate the pitch. And asked someone to help to print it. The result looks good to me.

Screenshot_20240619_155903_Photos~2.jpg

The cockpit almost finished, which will wax before assembly.

Screenshot_20240619_155831_Photos~2.jpg

Screenshot_20240619_155852_Photos~2.jpg

[okazaki0511]

Update some progress.

The ECU was finished. I used transplanted plastic to make the cover of header, which is satisfying for me.

Screenshot_20240723_134556_Photos~2.jpg

Screenshot_20240723_134610_Photos~2.jpg

[Stokesy44]

Amazing work all round

[DRUMS01]

Magical (and expensive) work!

Fantastic modeling

[digger303]

[okazaki0511]

Update some progress.

The front dampers and chassis front bulkhead were finished. The space of electric connector is too small, very hard to install the wires.

Screenshot_20240802_152144_Photos~3.jpg

Screenshot_20240802_152016_Photos~2.jpg

[digger303]

Hard to install, but not impossible.

[Kevthemodeller]

Lovely work going on here

[okazaki0511]

Updated some progress

Finished the front wing and steering wheel. Still added the dotted line to improve the realism.

Screenshot_20240925_154736_Photos~2.jpg

Screenshot_20240925_154719_Photos~2.jpg

About the brake, added the used trace on the brake disc.

Screenshot_20240925_155539_Photos~2.jpg

[Stokesy44]

More beautiful work

[okazaki0511]

Updated some progress.

Finished the rear wing. Thinned down the end-plate and adjusted the groove for the assembly.

Screenshot_20241017_141730_Photos~2.jpg

Screenshot_20241017_141740_Photos~2.jpg

Screenshot_20241017_141748_Photos~2.jpg

[cor]

nice work. slow and steady. will be a beauty when you've finished

[digger303]

[Kevthemodeller]

Suburb detail work

[Garion77]

Wow !!! the care for details are amazing ! Congrats on the amazing work !

[pg265]

Hi,

AMAZING!
Simply jaw dropping work and modeling skills!
The white doted clines on carbon add a spectacular result.
BRAVO!!

Pascal

[Kevthemodeller]