The #48in48 Challenge - Hasegawa Saab Draaken

[RangerNeil]

Its 20:00 hrs on 14/3/25 and the UK arm of the 2025 #48in48 challenge has kicked off.
My entry is the Hasegawa releases of the Saab J35 F Draaken in Swedish livery.
At the start we have:


























Phase 1 is the cockpit interior - I debated when I got the kit whether to go for the 3D interior decals - decided not to as the decals provided looked OK. Now regretting that decision as they refuse to conform to the surfaces - and the instrument panel ones are over-size.... Just about to apply 3rd dose of Microsol.

[digger303]

Yes you might have to go with something a bit stronger than microsol.
Best of luck with the 48hr thing.

[RangerNeil]

#48in48 Update #1 - Time 00:20 Sat 15/3/25

Required holes drilled in lower fuselage half - 2x 2mm and 8 x 1mm.


Fuselage halves dry fit to make sure the nose cone aligns.


Nose weighted with liquid gravity and CA.


Cockpit complete less ejection seat (instructions call for it to be fitted in final step).
Undercarriage wheels assembled, waiting for the Contacta to set and then sanding.
Exhaust nozzle partially assembled and painted with Ammo Mig "Jet Exhaust". Needs a little dry brush on the inner face to highlight the details then it can be finally assembled




I'm 4 hours in and need a coffee and nibbles. Work will resume at 01:30 hrs.

Yes you might have to go with something a bit stronger than microsol.
Best of luck with the 48hr thing.

Cheers Digger. 4th dose of Microsol did the trick. I reckon I'm going to need all the luck I can get!!

[RangerNeil]

#48in48 Update #2 04:00 hrs 15/3/25


Everything now primed. As soon as its all dry the big build can commence....

4 more hours till breakfast - can I last that long?......

[RangerNeil]

#48in48 Update #3 06:30 Hrs 15/3/26
The main build is complete - up to stage 5 on the instruction sheet. With all the faffing over the cockpit decals I expected to be behind schedule. Badly. Instead I'm more or less on tracks because its gone together WITHOUT ANY NEED FOR FILLER!!! The first time I've ever had this






So I'm taking a break now for bacon banjo's and a few zzz's. Work will resume at 10:00.

[RangerNeil]

#48in48 Update #4 14:00 Hrs 15/3/25

Most of the assembly is complete - just the undercarriage to do - all 4!! Top base colour has gone on.


Colour has gone on small parts.




Leaving the green to dry for a while before masking for the blue overlay and underside colour.
In the mean time I found a small bag of 1/48 jet pilot figures so ones being painted up although I'm not sure if he'll fit yet......

[digger303]

#48in48 Update #3 06:30 Hrs 15/3/26
The main build is complete - up to stage 5 on the instruction sheet. With all the faffing over the cockpit decals I expected to be behind schedule. Badly. Instead I'm more or less on tracks because its gone together WITHOUT ANY NEED FOR FILLER!!! The first time I've ever had this

Sheer Luxury Lad

[RangerNeil]

#48in48 Update #5 00:30 Hrs 16/3/25 - 19.5 hours remaining.
Underside paint is on.


Upper surfaces are masked off for the cammo overlay.




And the dark blue cammo overlay is on.






Leaving this to dry for a few hours then there are silver edgings on the outer leading wing edges and leading edge of the rudder, wheel wells and main belly to be added.
Then a coat of gloss varnish followed by decals.
I might - just - make the 48 hour deadline.

[digger303]

Fingers crossed. Waiting for varnish to dry though might be a sticker.

[digger303]

Internet got me again with a double post

[RangerNeil]

#48in48 Update #6 09:00 Hr 16/3/25. 11 Hours remaining.

Everything bar the missile pylons is now on. Just got to add one band of colour around the intakes and hen its time for a coat of gloss varnish prior to decalling it. Got the heating on so the gloss should dry in about an hour.




Stopped for bacon banjos and coffee and a quick snooze ar thecmomentas I've been on the go all night...

Fingers crossed. Waiting for varnish to dry though might be a sticker.

Fingers crossed indeed mate - getting close to the crunch time!!!

[DBMiller]

Great choice. I've always loved the look of this plane but never managed to buy one. Good luck!

Wait, is this 48 hours? For me the challenge would need to be 48 months!

[RangerNeil]

*** FINAL UPDATE @ 19:57 Hrs, 16/3/25 ***

Mission completed with 3 minutes left on the clock!!!








All I want now is a hot meal and then bed. Been on the go since 20:00 Hrs on the 14th.and I am knackered. Definitely getting too old for this kind of caper,...

[DBMiller]

Impressive build and determination!

[digger303]

Well done got it done with determination and it even looks very very good.

[RangerNeil]

Thanks guys!! The choice of kit helped greatly - no filler was required and only a little sanding. Mainly due to micro flash on the edges. Even so I only had 3 mins left on the clock! A close run thing.
I'd recommend the kit to anyone with an interest in Saab jets Swedish A/F or odd designs. Going to be interesting to see how the about to be reased JetMads Draaken compares.

[Elve1984]

Great build, nice achievment in 48 hours.

[RangerNeil]

Great build, nice achievment in 48 hours.

Thank you

[Kevthemodeller]

Very nice Hasegawa do make some nice and interesting kits, which makes for enjoyable builds