Page 3 of 4
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 20, 2016 12:18 am
by Paul
Damn they look great mate

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 20, 2016 3:16 pm
by Kingdan
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 20, 2016 4:40 pm
by Scaleman
Awesome Mike, I really like the truck. Very nice progress. Nice to see your not hauling snow all day.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Thu Jan 21, 2016 4:28 am
by InitialProduction1
Very sweet diorama coen, you really make show pieces, fun to watch them come alive.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Thu Jan 21, 2016 11:47 am
by Coen
Thanks Fellas. I'd have another update today, but my photobucket had gone insane. I can't upload images without half of the pics that I want to upload failing, pics that I uploaded last night are in triplicate and I can't delete them. Every time that I try it takes for ever and they just come back.
It's doing my head in.
I use photobucket everyday and it had tens of thousands of my photos on it, so I sort of need the thing.
They ran some sort of maintenance thing last night and it's completely buggered for me now 
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Thu Jan 21, 2016 12:56 pm
by Novorus
wow just does not seem to say enough, looking amazing to be sure.

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Thu Jan 21, 2016 1:22 pm
by OliveDrab
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Thu Jan 21, 2016 2:02 pm
by MarkVerploeg
Very nice work so far Michael
i like the olive drab color on the vehicles
it is a bit darker then the one i used on my recent Sherman but not so dark as the Tamiya od
your problem with photobucket may have something to do with a maintenance thing
i couldn't upload anything yesterday
keep up the good work
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sat Jan 23, 2016 6:12 am
by ForbesHutton
It's not just you have fits with photobucket....
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sat Jan 23, 2016 11:00 am
by Coen
I just got a completely unhelpful email reply to my service ticket for Robert the photo bucket robot.
He suggested that if his email was unhelpful to reply to his email and someone would give a crap.
This is an auto-response from Robert, the Photobucket robot, to your email regarding Google and your account information. The following information may help to recover your account, and will provide further details for account privacy and search engine indexing. If you are still unable to find and/or access your account, please reply back to this email and a Photobucket Support Representative will contact you shortly.
If you found your Photobucket account in a Google search but do not have access to your account, search here for step by step instructions on how to recover it:
https://secure.photobucket.com/forgot
For information regarding why your account or name is searchable on Google, go here:
http://support.photobucket.com/hc/en-us ... gle-Search
Please reply to this email if you have any other questions. The Photobucket Support Team will get to your ticket as soon as possible!
Robert
(The Photobucket robot)
I had a good laugh at this massive customer service failure.
It's one for the books.
It hits on specific words in your ticket and offers the most unrelated advice hahahahaha!
Needless to say... I replied.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Jan 25, 2016 1:35 pm
by digger303
Hi all,
I was concerned about the glue problem so I got in touch with Libor and this is his reply..... quote
"Hi Ian
There has never been problem with tamiya super thin glue, only early produced diamond trucks in abs were good to glue with abs plastic glues or fair amount of tamiya super thin.since all produced in PS,it glues very easy.
Cheers libor "
It seems Coen you were unlucky in getting an early kit but problem has now been fixed. Much to my relief as I have one or two kits unbuilt . damn who am I kidding I have a lot of unbuilt kits.
Ps..... Damn fine job

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Jan 25, 2016 6:59 pm
by InitialProduction1
WOW coen, outstanding builds on here, what did you think of that jeep? that wreaker is just AMAZING! and I've always liked the Sherman, you really turned it into a real soldier, where did you get some of those Decals on your builds? love your work,
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Jan 26, 2016 11:53 pm
by Coen
digger303 wrote:Hi all,
I was concerned about the glue problem so I got in touch with Libor and this is his reply..... quote
"Hi Ian
There has never been problem with tamiya super thin glue, only early produced diamond trucks in abs were good to glue with abs plastic glues or fair amount of tamiya super thin.since all produced in PS,it glues very easy.
Cheers libor "
It seems Coen you were unlucky in getting an early kit but problem has now been fixed. Much to my relief as I have one or two kits unbuilt . damn who am I kidding I have a lot of unbuilt kits.
Ps..... Damn fine job

That's good to know, I'll have to mention that fact in the next video that I make about the diorama.
InitialProduction1 wrote:WOW coen, outstanding builds on here, what did you think of that jeep? that wreaker is just AMAZING! and I've always liked the Sherman, you really turned it into a real soldier, where did you get some of those Decals on your builds? love your work,
The jeep was ok... Tamiyas jeeps are hundreds of times better, the best out there I think it's fair to say. This one was better than the italeri one that I built for my Holy Yeeps! diorama last year. Better instructions, better fits and better plastic.
The Tamiya jeeps are still the best choice though.
I have a huge stockpile of decals left over from prior builds that I use. When I don't have what I'm looking for I'll go to Ultracast, or Archer for the rest.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 27, 2016 12:28 am
by conradschmid99
that sherman's an absolute stunner!
this is one of your best dios and that's saying a lot!
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 27, 2016 1:21 am
by InitialProduction1
Thanks for the info, I love Archer drys, Ultracast? Have to look into them. Now your build Wow, hard to shut me up on builds, but you just did. Really amazing,.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 27, 2016 1:29 am
by Coen
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Wed Jan 27, 2016 6:58 pm
by InitialProduction1
Thanks coen, nice site.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Fri Jan 29, 2016 8:01 pm
by OneSmallStep1966
A BIG thank you for the 4-Part how-to on painting and weathering that fantastic Sherman. I've just got to watch Part 4 but have already learnt loads.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Fri Jan 29, 2016 10:11 pm
by Coen
Happy to help, I'm glad you found it useful.
I've made more progress on this project but I can't post any photos until photo bucket is working again.
If it's a ded duck then there's a whole lot of work here on the forum that will go poof.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 12:41 am
by Coen
Between bouts of shovelling snow and napping I started in on the figures today
Some Ultimate Dark Dirt to start...


A bit of before and after the dark dirt...

Once they're all cleaned up I'll hit the faces with a wash of some burnt umber acrylic paint then I'll start the dry brushing.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 12:55 am
by InitialProduction1
You know coen, you just keep putting out amazing build's, one after another, thank you for letting us into your world. you turned, "in my opinion" and I am only speaking for myself, the biggest piece of crap figure set, into a work of art. Outstanding work my friend.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 1:33 am
by heel
Epic. Fantastic. It just gets better and better.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 4:38 am
by Coen
They're still pieces of crap.

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 4:23 pm
by Coen
I'm about to toss the dragon wagon on the paint bench, but before I set all of that up I finished all of the dirt and pigment work on most of the figures, the jeep and Diamond-T and I added the first of many to the road surface.
The figures all got a bit of a mix of Ultimate dark dirt and earth to their knees, pants cuffs, boots, buts, and elbows. Then this was taken back with a stiff bristled brush and blended.





Then I did pretty much the same thing to the wrecker and the jeep. All of the lower areas and undercarriage got a coat and then I carried it up on to some of the upper surfaces.












Then I added two more colour mixes, one lighter, one a little darker to add variety. I also added the fuel stain to the fuel tank with some vallejo gloss.






The crew were also installed.





Then I started adding them all to the diorama. Some have been permanently installed, others only temporarily as I want to do more pigment work on them. I stuck the M4 on the road as the dragon wagon isn't painted yet, so I tossed it in for fun.












There is still a huge amount of work left to do, but it's closer to the end than the beginning now.
[youtube]TXObTlWKAGs[/youtube]
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 4:48 pm
by OneSmallStep1966
Damn that looks good

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 4:52 pm
by Scaleman
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 5:16 pm
by Nige99
Amazing work Mike

love the weathering on that wrecker, absolutely spot on!! The Bobby trap sign is a nice touch. Well done mate.

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 7:41 pm
by conradschmid99
That dio looks amazing!
I love the guys eating apples, it gives the figures a real human touch that many dios dont have.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 7:44 pm
by Kingdan
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Sun Jan 31, 2016 8:47 pm
by InitialProduction1
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Feb 01, 2016 8:47 am
by hansolo
Wow, Mike!
This truly is an Epic Build!! What an awesome diorama. So much going on, so much to see.
The apples are my favorite! Brilliant idea and execution! How you made and painted them, simple thus brilliant!
The apple tree is also beautiful! I have gót to get me some sea foam too! The weathering on all the vehicles is spot on.
I especially love the weathering on the M4 (that you'll be taking of later). The story of the MP's and the booby trap is genius!
Top to bottom amazing work. Love watching your build videos on it.
And I too am watching and learning from your clay based washes tutorials!
I'll keep my stick on the ice.

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Feb 01, 2016 4:16 pm
by Coen
Wow... Thanks fellas.
Very high praise.
I'm just trying to make it as easy as possible, so that there's no smoke and mirrors.
Breaking it down so that any of us can figure it out with some practice.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Feb 01, 2016 9:11 pm
by OneSmallStep1966
Mike, in your 4-part weathering how-to videos I thought the homemade handle you use to hold the workpiece was a great idea (I've lost count the number of times I've left a thumb print behind when painting a model).
A question, the threaded rod looks quite substantial (obviously needs to be rigid enough to withstand vigorous brushing without flexing) and I wonder what diameter rod it is and if you bother to fill the hole afterwards (not seen to the end of pt4 yet so apologies if you covered it there).
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Mon Feb 01, 2016 10:14 pm
by Coen
The handle is about an inch and a quartre diameter. I've no idea what the threaded bit is.
I don't bother filling the hole left behind, if I was doing an overturned vehicle I would certainly have to, but that has yet to happen. There's not much call for seeing the bottom of a tank. If I was I'd have to make some changes. Like glueing the stick to the inside through the turret ring with some epoxy instead of drilling a hole.
I actually have a how to on the stick thing if it's of use.
[youtube]ryw7wyBYn-U[/youtube]
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 8:14 am
by burnie43
Mike
As expected...your work has my boat floating big time !!!
Fantastic, words really do fail me....the scene, the painting and building, the....well...the whole thing !
Thanks for sharing El Maestro
Mark
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 11:01 am
by Paul
Great work as always Mike

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 11:05 am
by InitialProduction1
Very nice coen, I really like this build/diorama, I'm a sucker for dios, I like the story part. I watched your's on YouTube, very cool. On the wagon how was the details on the rigging and tires? The wreckers rigging is beautiful and you really nailed it. On the tires, Some tread patterns are just awful, and I get after market, but on the wagon that would cost some.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 12:06 pm
by Novorus
Mike, coming on and amazed as always at the way it all looks.
The diorama will be just great

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 12:38 pm
by Coen
Thanks Guys
InitialProduction1 wrote:Very nice coen, I really like this build/diorama, I'm a sucker for dios, I like the story part. I watched your's on YouTube, very cool. On the wagon how was the details on the rigging and tires? The wreckers rigging is beautiful and you really nailed it. On the tires, Some tread patterns are just awful, and I get after market, but on the wagon that would cost some.
The DW tires are all rubber, so the detail is pretty good. The trouble is that because they're rubber they won't take paint well, if at all. So leaving them in plain rubber is the other option. The problem with that is that over time they will disintegrate because they are unprotected. It might take months, years, or decades, but eventually the rubber will fall apart.
However, some of the solvents in the paints or weathering materials can attack the rubber and cause them to fall apart as well. So there's no really good plan.
They should really have been replaced with resin.
But as you mentioned... that would be really expensive... and it's why I didn't do it.
They aren't permanently attached so I can remove them and replace them if I need to at any time, and I may do that at some point one day.
But not this day.
My recommendation would be to replace them for anyone looking to build the kit. The resin will be far longer lasting and take paint better. The rubber ones just don't look good when they're left unpainted. The colour is out of scale and it looks funny.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 2:48 pm
by InitialProduction1
Well, sold me. ugh! I hate the rubber tires, did not read they were rubber yak, thank you. Wonder what there paying for one arm or leg these days lol. Again very cool build.
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 5:46 pm
by Kingdan
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 6:05 pm
by Twokidsnosleep
Maybe time to do a race car in the GB, Mike
You have mastered all this armour stuff
Really super work here, love the truck and the guy with the news paper
Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 6:28 pm
by OneSmallStep1966
Can't add any more to what's already been said, your work is brilliant.
Also, thanks for linking your YouTube hand-hold thingamajig, guess what I'll be making this weekend

Re: "Haul'em Boys!" M36 T969A US Diamond Wrecker
Posted: Tue Feb 02, 2016 6:30 pm
by Rodney
OOOOOH i like i really like
