Global Scale Modeller

Posted: **Thu May 13, 2021 1:07 am**

What they all said.

Posted: **Thu May 13, 2021 4:19 am**

Thanks guys

As I'm not using the front wheel (mud) guard I have to find another way to fix the headlamp and horn bracket to the forks so I tried gently drilling out the two fixing points where the front fairing attaches and accidently snapped one

So I'm going to try to make two more fixing points with some sprue and glue and pin in place when the bracket goes on later. hope its strong enough to hold it

I will have to cut the other one off and clean up the joining edges then drill a .5mm pin hole and try and get a good bond.

Posted: **Thu May 13, 2021 8:38 am**

That seat is freaking awesome!

Posted: **Fri May 14, 2021 9:54 pm**

MrBowcat wrote: Thu May 13, 2021 8:38 am That seat is freaking awesome!

Thanks MrB

the brown will look better with the colour of the bike, didn't want too much black and it was too thick and high. The brown leather has a nice look to it and a little wear will add to it later.
I pinned the parts and glued them in place, paintwork suffered a little

Rear wheel guard has been masked off to do the edge detail, just need to mask off the tank after its had a polish.

really small dot where the hole was filled on the top of the tank where the seat spring bracket fitted that needs polishing out but it wont be seen.

I've been looking for suitable springs to use for the rear of the seat, they are as you know concave in shape so I may have to try and make some, any suggestions welcomed

Posted: **Fri May 14, 2021 9:56 pm**

mark

Posted: **Sat May 15, 2021 1:26 am**

Posted: **Mon May 17, 2021 10:46 am**

even the Mrs is buying me pins now, still looking for the correct sizes

I do like those hat pins

Posted: **Tue May 18, 2021 12:36 am**

Hi Casper, look for Asta Ento pins, I've got some that are 38mm x 0.40mm in Stainless Steel. Got mine from https://www.watdon.co.uk/acatalog/E6850 ... tml#SID=27, might be worth a look?

Posted: **Tue May 18, 2021 1:02 am**

This may or may not be helpful as I'm not sure where to get it from atm. But stainless steel tubing is thin walled and may fit.
https://modelingmadness.com/scott/acces ... tubing.htm
Needles have a small bore and could be used as the spoke and the ferrule.
https://www.stainlesstubeandneedle.co.uk/

Posted: **Tue May 18, 2021 4:36 am**

[quote=Casper post_id=368230 time=1621025669 user_id=

[/quote]

This picture could be used in some sort of advertisement or promo or something for some kind of modelling dooohicky bike bench.
Or something

Posted: **Tue May 18, 2021 6:15 pm**

Love that term

[/quote]
This picture could be used in some sort of advertisement or promo or something for some kind of modelling dooohicky bike bench.
Or something

this ones better

Posted: **Tue May 18, 2021 6:15 pm**

digger303 wrote: Tue May 18, 2021 1:02 am This may or may not be helpful as I'm not sure where to get it from atm. But stainless steel tubing is thin walled and may fit.
https://modelingmadness.com/scott/acces ... tubing.htm
Needles have a small bore and could be used as the spoke and the ferrule.
https://www.stainlesstubeandneedle.co.uk/

thanks digger

Posted: **Tue May 18, 2021 6:17 pm**

Mumbly wrote: Tue May 18, 2021 12:36 am Hi Casper, look for Asta Ento pins, I've got some that are 38mm x 0.40mm in Stainless Steel. Got mine from https://www.watdon.co.uk/acatalog/E6850 ... tml#SID=27, might be worth a look?

Thanks

they look perfect, will take a closer look

Posted: **Wed May 19, 2021 3:15 am**

Thanks for the tip mumbly
who would have thought there were so many different pins to stick into insects

https://www.watdon.co.uk/acatalog/insec ... ories.html

Posted: **Wed May 19, 2021 1:08 pm**

I know, it's another world.

I am sure the reverse is true from entomologists looking for realistic metal paint advice here

Posted: **Wed May 26, 2021 12:43 am**

Mumbly wrote: Wed May 19, 2021 1:08 pm I know, it's another world.

I am sure the reverse is true from entomologists looking for realistic metal paint advice here

Posted: **Wed May 26, 2021 12:52 am**

I managed to fix the headlight assembly to the forks using a 1mm rod and brass tube but not sure on the angle of the headlight yet, will have to see what it looks like later on after the forks go on, I need to clean it up now and re-paint the parts gloss black

mark

Posted: **Wed May 26, 2021 5:18 am**

Great touch, nicely achieved.
Going to chrome the front fork springs too ?

Posted: **Wed May 26, 2021 8:45 am**

Very neat work.

Posted: **Wed May 26, 2021 8:58 am**

digger303 wrote: Wed May 26, 2021 5:18 am Great touch, nicely achieved.
Going to chrome the front fork springs too ?

Thanks digger

it was a bit fiddley with my fingers but after dropping it a dozen times I finally got it to stick. I have a few small parts that need gloss black so I might as well re-do the springs, Alclad chrome as you know can really smell and the Mrs wont be best pleased me spraying it in the spare room so I have to pick my moment

No booth area at the moment, that's why its taking me so long to paint up parts. Weather is good today so we are off to Chester Zoo to see my relatives

I'm not a fan of zoo,s but my Granddaughter loves it

and we have one of the best in Europe so they say. I go straight over to the Rothschild's giraffe enclosure for feeding time

have a great day

Posted: **Wed May 26, 2021 8:59 am**

MrBowcat wrote: Wed May 26, 2021 8:45 am Very neat work.

thank you MrB

much appreciated, getting there slowly

Posted: **Wed May 26, 2021 10:50 am**

The rear brake foot peddle assembly is very basic and the kit plastic spring is awful so I tried a small spring I had lying around and a 1mm coach bolt, it looks a lot better, it works as it should now but still needs work. The heads on these micro scale BA bolts are always oversize height wise so I may try to thin them back a little before cutting to length.

check out Jerry Kieffer
wow just wow

https://www.craftsmanshipmuseum.com/Kieffer4.htm

Posted: **Wed May 26, 2021 11:24 am**

Excellent workmanship Casper your really lifting the bar several feet.

Me I'm happy if the cement sticks.
As for Jerry Kieffer I'd love to see his workshop and the way he achieves results....great link

Posted: **Wed May 26, 2021 1:18 pm**

digger303 wrote: Wed May 26, 2021 11:24 am Excellent workmanship Casper your really lifting the bar several feet. Me I'm happy if the cement sticks.
As for Jerry Kieffer I'd love to see his workshop and the way he achieves results....great link

Hi matey

some interesting reading

top shelf
https://www.craftsmanshipmuseum.com/
https://www.modelenginecollecting.com/

Posted: **Wed May 26, 2021 1:19 pm**

Casper wrote: Wed May 26, 2021 1:18 pm
digger303 wrote: Wed May 26, 2021 11:24 am Excellent workmanship Casper your really lifting the bar several feet. Me I'm happy if the cement sticks.
As for Jerry Kieffer I'd love to see his workshop and the way he achieves results....great link

Hi matey
some interesting reading
top shelf
https://www.craftsmanshipmuseum.com/
https://www.modelenginecollecting.com/
https://www.craftsmanshipmuseum.com/memuseum4.htm

Posted: **Wed May 26, 2021 1:22 pm**

Casper wrote: Wed May 26, 2021 1:19 pm
Casper wrote: Wed May 26, 2021 1:18 pm
digger303 wrote: Wed May 26, 2021 11:24 am Excellent workmanship Casper your really lifting the bar several feet. Me I'm happy if the cement sticks.
As for Jerry Kieffer I'd love to see his workshop and the way he achieves results....great link

Hi matey
some interesting reading
top shelf
https://www.craftsmanshipmuseum.com/
https://www.modelenginecollecting.com/
https://www.craftsmanshipmuseum.com/memuseum4.htm
http://www.geraldwingrove.com/Current_P ... _Page.html

Posted: **Wed May 26, 2021 1:49 pm**

Casper wrote: Wed May 26, 2021 1:22 pm
Casper wrote: Wed May 26, 2021 1:19 pm
Casper wrote: Wed May 26, 2021 1:18 pm

Hi matey
some interesting reading
top shelf
https://www.craftsmanshipmuseum.com/
https://www.modelenginecollecting.com/
https://www.craftsmanshipmuseum.com/memuseum4.htm
http://www.geraldwingrove.com/Current_P ... _Page.html

good stuff

Posted: **Wed May 26, 2021 3:12 pm**

Love the foot pedal, excellent modification, that is going to look amazing

Wow those custom Harley bikes are mind blowing . I am just lacing my wheels with wire like a peasant; smidge of arrogance in that write up on threaded scale wire wheels.
I would like to meet and learn from the guy with the skills, not the writer with the attitude.

Posted: **Thu May 27, 2021 2:29 am**

Wow! Nice customizations! This is really going to be amazing!

Posted: **Thu May 27, 2021 6:08 am**

Thank you Joe

Posted: **Thu May 27, 2021 6:15 am**

Twokidsnosleep wrote: Wed May 26, 2021 3:12 pm Love the foot pedal, excellent modification, that is going to look amazing

Wow those custom Harley bikes are mind blowing . I am just lacing my wheels with wire like a peasant; smidge of arrogance in that write up on threaded scale wire wheels.
I would like to meet and learn from the guy with the skills, not the writer with the attitude.

Incredible work, just blows me away the things these engineers do. Most of the engines accurately run its amazing. Check out some of the miniature weapons

Those wheels must have took forever to lace, it's like embroidery. Superb stuff

Posted: **Thu May 27, 2021 6:41 am**

Casper wrote: Thu May 27, 2021 6:15 am
Twokidsnosleep wrote: Wed May 26, 2021 3:12 pm Love the foot pedal, excellent modification, that is going to look amazing

Wow those custom Harley bikes are mind blowing . I am just lacing my wheels with wire like a peasant; smidge of arrogance in that write up on threaded scale wire wheels.
I would like to meet and learn from the guy with the skills, not the writer with the attitude.
Incredible work, just blows me away the things these engineers do. Most of the engines accurately run its amazing. Check out some of the miniature weapons
Those wheels must have took forever to lace, it's like embroidery. Superb stuff

I have no trouble finding someone operating on a level that makes my work look like I am a toddler with a diaper over my head
Interestingly enough, I find it motivating, unless they are a complete jerk about it

I must say, you have been a great motivating addition to ISM and it is a true pleasure to have someone of your skill level and experience around here. Hats off to you

Posted: **Thu May 27, 2021 8:17 am**

Thanks for your very kind words Scott, you guys have made me so welcome, I thank you all

So much talent and experience here on the forum and so diverse its a joy to read through the amazing builds and learn new skills along the way. I'm trying to do some masks for the harley tank at the moment and it's testing my patience trying to fit the curved sides. I'm also tryng to group some parts for painting, the flash and seam lines are on every part with this kit and need cleaning up before you start.
I love chopping things up and adding what's to hand really, it's more fun but my problem is getting the scale correct using old eyes and whatever I have around me at the time. My problem is airbrushing, I have nowhere to set up a booth area at the moment so when I have a few things to spray It's a case of setting it up and doing what I can. The weather looks great today so I will try to get something painted.
Those master craftsmen are just incredible aren't they m8

Posted: **Thu May 27, 2021 8:19 am**

This is what happens when your work/life balance goes to cock

You miss good build threads like this one

Some superb scratch and detailing work going on here mate

following along with interest now

Posted: **Thu May 27, 2021 9:13 am**

Kevthemodeller wrote: Thu May 27, 2021 8:19 am This is what happens when your work/life balance goes to cock You miss good build threads like this one

Some superb scratch and detailing work going on here mate following along with interest now

Hi Kev

thanks matey
with some of the parts its easier to add instead of clean. Some parts like the oil pipe and gear shifter rod bellow are very thin and fragile but need seam lines removing so its quicker to replace with brass tube. I cut the rod in two and scraped of some material till I got a snug fit into the brass tube the same size then just superglued them in place, simple really but looks better than the plastic and is stronger.

mark

Posted: **Thu May 27, 2021 2:22 pm**

Think I'll leave my kit right where it is.....

Wonderful stuff.

Posted: **Thu May 27, 2021 3:39 pm**

digger303 wrote: Thu May 27, 2021 2:22 pm Think I'll leave my kit right where it is.....
Wonderful stuff.

You need to carry on with what you do best matey

Love your work

Well with the all the good weather here in sunny Wales

I had chance to get some paint running through my airbrush at last. First up was a good clean

I laid down some Alclad gloss black and when dry shot some Alclad Chrome on one or two parts like the side cover, instrument panel, distributer. And all the other metallic parts were sprayed with Alclad Airframe Aluminium just for contrast. The chrome didn't sit that well but looks acceptable for what I'm after, It was the last 10mm in the bottle so I wasn't expecting shinny chrome. I clear coated with Zero clearcoat lacquer when dry.

Posted: **Thu May 27, 2021 3:42 pm**

Posted: **Thu May 27, 2021 11:46 pm**

I almost never prepaint my parts before assembly. Do you now scrape the paint off the attachment points and use Tet or just use Ca straight on.
Your method does give superior straight edge paint lines. I just worry about the bits staying together if I was to do it.
Love the mini bench I always admire it with every fresh pic.

Posted: **Fri May 28, 2021 3:48 pm**

digger303 wrote: Thu May 27, 2021 11:46 pm I almost never prepaint my parts before assembly. Do you now scrape the paint off the attachment points and use Tet or just use Ca straight on.
Your method does give superior straight edge paint lines. I just worry about the bits staying together if I was to do it.
Love the mini bench I always admire it with every fresh pic.

It depends really but generally I mask the area with fluid, tape or blue tac or scrape with the back of a blade, I use sandwich wrap as well (hate the stuff

)
I use different glues but my go to instant adhesive is either Permabond or Gorilla thin or thick though I did use some cheaper stuff for the Bentley wheels.
I'm not a fan of superglue and definitely prefer Poly or Tamiya thin. I use two Canopy glues but one I cant find, the other is Zap formula 560 and dries clear, I used this on my headlamp glass.

Posted: **Fri May 28, 2021 3:49 pm**

Casper wrote: Fri May 28, 2021 3:48 pm
digger303 wrote: Thu May 27, 2021 11:46 pm I almost never prepaint my parts before assembly. Do you now scrape the paint off the attachment points and use Tet or just use Ca straight on.
Your method does give superior straight edge paint lines. I just worry about the bits staying together if I was to do it.
Love the mini bench I always admire it with every fresh pic.

It depends really but generally I mask the area with fluid, tape or blue tac or scrape with the back of a blade, I use sandwich wrap as well (hate the stuff )
I use different glues but my go to instant adhesive is either Permabond or Gorilla thin or thick though I did use some cheaper stuff for the Bentley wheels.
I'm not a fan of superglue and definitely prefer Poly or Tamiya thin. I use two Canopy glues but one I cant find it dries like glass, the other is Zap formula 560 and dries clear, I used this on my headlamp glass.

Posted: **Fri May 28, 2021 3:57 pm**

The Clutch cover was done in Alclad Airframe aluminium and the headlamp bezzel and tool box cover in Alclad chrome, the chrome didn't come out as it should but I kinda prefer that look for this bike.

Posted: **Fri May 28, 2021 3:59 pm**

Cut the sprue from the headlamp plastic with a small saw and sanded the edges smooth

Posted: **Fri May 28, 2021 4:02 pm**

brushed the inside with silver and glued in a bulb. If you wanted the lights to work the tank is the best place for battery and switch but I wont be doing that, it just looks better with a bulb.

Posted: **Fri May 28, 2021 4:04 pm**

Zap formula 560 to fix the glass and bezel to the headlamp, a small power cable and she's ready to go on the bike.

Posted: **Fri May 28, 2021 4:05 pm**

Posted: **Fri May 28, 2021 5:42 pm**

That looks great

you made the bulb from clear sprue, yes?

Posted: **Fri May 28, 2021 5:53 pm**

Twokidsnosleep wrote: Fri May 28, 2021 5:42 pm That looks great
you made the bulb from clear sprue, yes?

No mate its a Maglite bulb I had spare, perfect size. Just cut the pins off and glued in in place. It looked dark and empty before and only took ten minutes

Posted: **Fri May 28, 2021 5:55 pm**

some bits are still dry fit till I sort out some wiring, not much just one or two wires for detail.

Posted: **Fri May 28, 2021 5:56 pm**

Global Scale Modeller

1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750

Re: 1/9 Italeri Harley WLA 750