Global Scale Modeller

Posted: **Wed Jan 22, 2014 7:48 pm**

Panzerwolf wrote:I like your new intro, the Marder looks great too So many metal parts...

Thank you!

Many small parts to be painted.... looking forward to that!

Posted: **Wed Jan 22, 2014 9:30 pm**

I love this vehicle - will be total unique. PE rivets - great idea ! >>> professional attitude

. Well done mate

Posted: **Wed Jan 22, 2014 9:50 pm**

AchtungPanzer wrote:I love this vehicle - will be total unique. PE rivets - great idea ! >>> professional attitude . Well done mate

Thank you

Always trying to push my limits, so PE rivets I'm definably going to try some times!

Posted: **Thu Jan 23, 2014 1:41 pm**

Well I if work on such little details I wont get to the doctor to give me any medication and got mad in few min. You must be a really patient (as and adjective)

person.
That is some astonishing work you are doing there !!!!!! Awesome job !

Posted: **Thu Jan 23, 2014 2:19 pm**

Jenik wrote:Well I if work on such little details I wont get to the doctor to give me any medication and got mad in few min. You must be a really patient (as and adjective) person.
That is some astonishing work you are doing there !!!!!! Awesome job !

Thank you very much Jenik!

Posted: **Thu Jan 23, 2014 2:29 pm**

superb vid and stunning work

Posted: **Thu Jan 23, 2014 2:35 pm**

Watched your vid last night Frans, great update. Painting soon?

Posted: **Thu Jan 23, 2014 2:53 pm**

Tiger131 wrote:superb vid and stunning work

Thanks Mate!

chief5437 wrote:Watched your vid last night Frans, great update. Painting soon?

Thanks Chief! No painting just yet... Working on the Karl möser and got to finish the PE works for this Marder.
But! I ordered some PE placers at Ultimate, so hoping to test them out while replacing those handles for PE ones....

Can't wait to test them out!

Posted: **Thu Jan 23, 2014 3:48 pm**

Holy moly Frans ... I'm speechless once more...

This work can't be praised highly enough

!

Posted: **Thu Jan 23, 2014 8:05 pm**

that is beautiful work mate

Posted: **Sat Jan 25, 2014 1:49 am**

Beautiful and sublime work Frans!

Very nice intro video too, also very professional video, it's like being on a workshop but in the comfort of our homes.

I'm really looking forward to see it painted and all the details come to life.

Posted: **Sat Feb 01, 2014 6:25 pm**

Cheers for all nice comments guys

I've got a small update for you guys. I'm back working, so didn't had much modelling time this week, but it's still progress

First up: The piece of wood that goes under the jack.
Here's the kit part that is to small moulded for the real block would be much bigger:

I cut a piece of balsa wood (1x1 cm) and added the Photo Etch parts to it.
And I gave the PE placers from Ultimate a try out (I really wanted to test them) by placing a very small winged nut in the middle...

And yeah... the PE placers are working awesome
I had a placer with a sticky tip, but when I touched accidently the CA glue while adding a piece I cloud throw way that placer. With the Ultimate placer, you just sharpen the tip, and its sticky again. Great product

And here's the block of wood on the vehicle:

Added the jack on top of the toolbox. It's fastened with handles.

Then it was time to detail the towing pin:

Cut out the pin, and made another pin by stretching sprue.
Drilled a small hole for the new pin, and added a small PE chain.

And glued it on the vehicle rear.

Made the towing cable, and dry fitted it on the holders.

Completely reworked the notek light... A bit to much glue, but the little bugger would not stick... grrr...
And as you can see, I made a start at the Friul tracks. You just can't beat the detail on them! Just one and a half track remaining to put together...

All together so far..

Thank you for waching, and cheers guys!

Posted: **Sat Feb 01, 2014 6:32 pm**

Awesome work Fran's, excellent detail, you can't beat friul tracks either well worth the cost.

Glad you like the pe placer they are a very handy tool

Posted: **Sat Feb 01, 2014 7:20 pm**

Paul wrote:Awesome work Fran's, excellent detail, you can't beat friul tracks either well worth the cost.

Glad you like the pe placer they are a very handy tool

Thanks Paul

yeah they are great

PE addict fly1ngdutchm4m approved

Posted: **Sat Feb 01, 2014 8:32 pm**

You have a "wellness" Man...to this model - very good Frans , great work with PE

. - He will be like a Pearl

Posted: **Sat Feb 01, 2014 8:58 pm**

AchtungPanzer wrote:You have a "wellness" Man...to this model - very good Frans , great work with PE . - He will be like a Pearl

Thank you very much my friend

What can I say... I'm a very patience man....

Posted: **Sat Feb 01, 2014 9:05 pm**

HollywoodModelling wrote:Frans buddy you are crazy.... this is awesomefull to the max... I am speechless.. you crazy crazy genius..

Thanks buddy

Really appreciate the nice comment!
Owh, and ehmmm....

Posted: **Sun Feb 02, 2014 10:42 am**

This build is already epic! Thanks for showing the process step by step. I can't believe all the tiniest details. I have only worked with PE parts once so far, and knowing how difficult and fiddly these buggers can be... Incredible.

Posted: **Sun Feb 02, 2014 11:27 am**

Epic build!!!

But many have already said this so I just don't know what else to say!!

I think this is going to be an R2D2 to go with Paul's C3PO Tank build from last year..
We could maybe enter both in a "heavy metal" build competition...
So much PE parts here its unbelievable.....
So glad you have a magnifying headlamp and teeny tweezers and PE pickup sticks...
Most of mine would be in the carpet monster by now!
Keep up the superb build work Frans, and keep sharing with ISM dude!!
We all love it!!

" munch...chomp.....munch.....gulp!"

Posted: **Sun Feb 02, 2014 2:15 pm**

localjedi wrote: This build is already epic! Thanks for showing the process step by step. I can't believe all the tiniest details. I have only worked with PE parts once so far, and knowing how difficult and fiddly these buggers can be... Incredible.

Thank you very much buddy!
I have fun building with PE parts, but I had to learn working with it..

Posted: **Sun Feb 02, 2014 2:26 pm**

wappynutter wrote:Epic build!!!
But many have already said this so I just don't know what else to say!!

I think this is going to be an R2D2 to go with Paul's C3PO Tank build from last year..
We could maybe enter both in a "heavy metal" build competition...
So much PE parts here its unbelievable.....
So glad you have a magnifying headlamp and teeny tweezers and PE pickup sticks...
Most of mine would be in the carpet monster by now!
Keep up the superb build work Frans, and keep sharing with ISM dude!!
We all love it!!
" munch...chomp.....munch.....gulp!"

Thank you very much andy!

I like your idea for a heavy metal build.

Can see the topic already: "Heavy Metal SIG" Any model, any era, loads of PE. The reveal section would be a shiny one.
No paint or weathering, just all metal!

I will keep sharing my builds with ISM mate, for I love this community

Cheers mate! I'm going back to putting the metal tracks together. The only boring thing at this build....

Posted: **Sun Feb 02, 2014 2:41 pm**

Tiny update, and the last for this weekend...
One Friul track finished and added... DANG! I love those metal tracks.....

Posted: **Mon Feb 03, 2014 12:01 am**

Just realised. ... Have to replace all handels at the side armor too! Thinking of buying resin ones. Got PE replacements but those are missing a plate where the handle is mounted on, and they would be a nightmare to glue on. ..

Posted: **Tue Feb 04, 2014 6:17 pm**

The Friuls looking great Frans

! Amazing work mate

!

Posted: **Tue Feb 04, 2014 8:00 pm**

HWGuderian23 wrote:The Friuls looking great Frans ! Amazing work mate !

Thanks buddy!
I shared this pic on Flickr, and in 2 days it has been viewed 11944 times...

CRAZY!

Anyway, I love Friul Tracks

Hope to do some more work on the Marder this weekend!

Posted: **Tue Feb 04, 2014 8:22 pm**

that is all

Posted: **Tue Feb 04, 2014 8:38 pm**

Brilliant update as always Frans and the track looks brilliant, hard to believe this started out as a Tamiya kit

Tom

Posted: **Tue Feb 04, 2014 9:21 pm**

Nige201980 wrote: that is all

Thanks Nige!

Posted: **Tue Feb 04, 2014 9:23 pm**

JayCub wrote:Brilliant update as always Frans and the track looks brilliant, hard to believe this started out as a Tamiya kit

Tom

Thank you very much Tom

I like upgrading Tamiya kits.
But my next kit will be a Dragon again I think! Or AFV...

Posted: **Fri Feb 07, 2014 12:20 am**

I can't wait to see some paint on this awesome model! I'm running out of compliments to say on this build... :S

Joking... This build is stunning, absolutely beautiful, such a great skill Frans, I'm in awe...

Thank you!

Posted: **Fri Feb 07, 2014 5:25 pm**

she looks the little beauty mate

you've done one hell of a job on her

Shane

Posted: **Fri Feb 07, 2014 10:52 pm**

reelmesh wrote:I can't wait to see some paint on this awesome model! I'm running out of compliments to say on this build... :S

Joking... This build is stunning, absolutely beautiful, such a great skill Frans, I'm in awe...

Thank you!

Thanks buddy!

I ordered some resin Tie-Down Cleats for it, should come in this week.
I want to replace the plastic strip thingies that is now on the armour plates that suppose to be Tie-downs...
I think replacing these will make a whole lot of difference

There are replacements in the PE set I got, but even these are horrible, and almost impossible to glue onto the armour.
last thing to do are the tools and clasps and then she's ready to prime..

Posted: **Fri Feb 07, 2014 10:53 pm**

longlance67 wrote:she looks the little beauty mate

you've done one hell of a job on her

Shane

Thanks Shane!

Posted: **Thu Feb 13, 2014 7:19 pm**

It's been a while, very busy at work, but I managed to do a bit of work on the Marder.

I wanted to replace the moulded tie-down cleats on the armour plates. This because the moulded ones are not more then plastic strips and in no way close to looking like handles. Now, I did had replace ones in my PE set, but those were missing a plate where the handle was welded on. And It would be almost impossible to glue them on...
So I ordered resin cleats. These are awesome, and much more easier to glue on.

Here are the moulded plastic strips ones...

And here are the real ones. These cleats were used to tie down the winter tarp. And in summer to tie down a camo net,

And here's how she looks after replacing the moulded with the resin cleats.

The gun on the turret bar is a gun from my scrap box. It's supposed to be there, but it did not came with the kit. The mount was in the PE upgrade set, so I added the gun. It will be repainted

So far this update guys!
Hope to do some more work on her this weekend. All hat remains now, is the tools and some clamps and clasp making...

Posted: **Thu Feb 13, 2014 9:42 pm**

It was all fine..... Until I got to the shot of the fighting compartment.
Blah!
Frans that is BEAUTIFUL!
Oh yeah... The cleats are nice too. Better than the kit offerings to be sure. A tarp hanging from a few of those with some lead strip as a tied own would look...... Mmmmmmmm.
They're screaming to have something tied to them. Hahaha.

Posted: **Thu Feb 13, 2014 9:55 pm**

Greetings Etch God :p

smashing work mate,

your attention to detail is amazing and a pleasure to watch

keep it up

Shane

Posted: **Fri Feb 14, 2014 6:05 am**

Coen wrote:It was all fine..... Until I got to the shot of the fighting compartment.
Blah!
Frans that is BEAUTIFUL!
Oh yeah... The cleats are nice too. Better than the kit offerings to be sure. A tarp hanging from a few of those with some lead strip as a tied own would look...... Mmmmmmmm.
They're screaming to have something tied to them. Hahaha.

Thank you Coen

What can I say.... I love my PE

I was thinking of a tarp or camo netting...

I saw in some real pics there was a small cable trough all cleats, I'll probably do that...

Cheers mate!

Posted: **Fri Feb 14, 2014 6:14 am**

longlance67 wrote:Greetings Etch God :p

smashing work mate,

your attention to detail is amazing and a pleasure to watch

keep it up

Shane

A etching God... Great compliment!
I'm still learning while bending PE though.

I guess I'm Bender.... Please insert PE girder....
[youtube]d4JBFPFDEUo[/youtube]

Posted: **Sun Feb 16, 2014 8:23 am**

This is great and is seriously pushing me to start my first armour build. Truly awesome work FD

Posted: **Sun Feb 16, 2014 11:18 am**

Raptor wrote:This is great and is seriously pushing me to start my first armour build. Truly awesome work FD

Thank you Andy

hope to see your first AFV soon!
Cheers buddy

Posted: **Sun Feb 16, 2014 4:43 pm**

Hello friends!
Thanks for tuning in again!

The last couple of days I was a bit struggling with the PE tool clamps from the Aber upgrade set.
Each clamp contained 3 parts to be folded, and I just couldn't get the hang of it.
Here's a pic of the Aber clamps.

I was wondering why the did not make the clamp out of 2 parts like Griffon models has done.
Wait a minute.. I have PE tool clamps from Griffon

Now these are a lot better to fold, and the PE is thicker, so it does not break so easily.
Here are the tools and clamps added. The golden clamps are Griffon, the silver Aber.
I'm cooking with gas now!

Now, this can only mean that I can make the next announcement...

All Photo Etch Finished!

There is a headphone planed, but that is going to be done after painting the Marder.
All that's left to do now, is constructing the second track from Fruil.
After that, she's ready to paint!

So here she is in her shiny metal coat.

The towing cable at the rear is hold by straps. I didn't closed the straps just yet, for I'm painting the cable separately and put it back on later.

So next time you will see here, she's got her shoes on for the final build pic, and she will be ready for painting.

Cheers guys!

Posted: **Sun Feb 16, 2014 5:03 pm**

And now.... I will write AWESOME! One million times!
Awesome!... Awe....
You get the idea though.
Frans buddy! She's wonderful dude.
Painting her will be another epic journey, but this one was a hell of a ride!

Posted: **Sun Feb 16, 2014 5:53 pm**

Coen wrote:And now.... I will write AWESOME! One million times!
Awesome!... Awe....
You get the idea though.
Frans buddy! She's wonderful dude.
Painting her will be another epic journey, but this one was a hell of a ride!

Haha

Thanks a million buddy!
Thank you. .. Thank you. .. th...

Yeah. .. Painting her will be another challenge, but it would be fun to do.
And I have chosen a difficult camo pattern too....
So it will be a interesting sequel of this thread!

Posted: **Sun Feb 16, 2014 7:46 pm**

hi Frans
this looks great
very nice inprovement on a (simple)tamiya kit
makes me want to start on mine
cheers Mark

Posted: **Sun Feb 16, 2014 7:58 pm**

MarkVerploeg wrote:hi Frans
this looks great
very nice inprovement on a (simple)tamiya kit
makes me want to start on mine
cheers Mark

Thank you Mark!

This was a cheap and simple kit indeed, but all PE did her justice I think.
All upgrades cost more than the kit. Could buy 4 kits of it... lol

It is a great kit too build, hope to see yours soon

Posted: **Sun Feb 16, 2014 8:57 pm**

hi
well i have the dragon marder but i have all the pe sets from voyager and a aber barrel
but it to see how it goes and if i like working with that much pe
looks.like a nice kit it has a full interior in it
but i got this because i have a befehls version aswell and that one is missing a sprue
so i will build the regular with the pe and the other with the leftover parts
cheers

Posted: **Mon Feb 17, 2014 6:30 am**

MarkVerploeg wrote:hi
well i have the dragon marder but i have all the pe sets from voyager and a aber barrel
but it to see how it goes and if i like working with that much pe
looks.like a nice kit it has a full interior in it
but i got this because i have a befehls version aswell and that one is missing a sprue
so i will build the regular with the pe and the other with the leftover parts
cheers

The Marder is one of my favorite vehicles together with the Tiger 1...
Never build a Dragon Marder though, think that's going to be the next one!
Good luck with your Marder, the photo etch sets from Voyager are really nice to work with

Posted: **Tue Feb 18, 2014 8:34 pm**

Hello guys!
Well, she finished now. She has her metal shoes on, and is ready to be primed this weekend.
So here are the very last pics of the Marder unpainted.
I enjoyed this build that I started September the 8th...
The next time you will see here she's primed!

Posted: **Wed Feb 19, 2014 1:58 am**

She and Paul's C3P0 King Tiger would go very well together.
Magnificent examples of PE work!!!

Posted: **Wed Feb 19, 2014 6:09 am**

Coen wrote:She and Paul's C3P0 King Tiger would go very well together.
Magnificent examples of PE work!!!

Thank you very much Coen

That Tiger Paul made is indeed awesome too, maybe we should hook up his Tiger with my Marder (that means marten in English) and see what offspring a Tiger and Marten would have...

Now for the painting, that would be another challenge I think!

Global Scale Modeller

Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35

Re: Tamiya Marder III Ausf.M Tank destroyer 1:35