Page 5 of 47
Re: My improvised mini man cave/corner/coffee table thingy
Posted: Fri Aug 02, 2013 6:37 pm
by Lysion
Mcleod, looks nice but perhaps a little low for longer building sessions. I use my pc desk as build station, and you are right it is not good because you have to clean the desk free from gadgets before building. And then clean the desk of model-building stuff after building and install your gadgets again. But since I have no other option at the moment, it will do.
Do you always have such a clean work area, or just cleaned and arranged it for the picture?

Re: My improvised mini man cave/corner/coffee table thingy
Posted: Fri Aug 02, 2013 6:52 pm
by McLeod
I just sorted it out today, preparation for my first build since about 2000, so that's why it looks so clean and tidy, a new cutting mat too so that helps it look clean lol.
I've got a improvised beanbag to sit on, actually helps posture because I have to sit properly to be comfortable.
Re: Lets see your modelling work areas
Posted: Fri Aug 02, 2013 8:39 pm
by Maketci
Thanks guys
Regards,
Maketci.
Re: Lets see your modelling work areas
Posted: Tue Aug 06, 2013 3:38 pm
by wappynutter
Here it is guys my super work area.......
and of course with the added lighting ...
* please note the modelling refreshment*
Strongbow Dark fruits.
If any of you haven't tried this *Pop* then you need to ASAP...

Re: Lets see your modelling work areas
Posted: Wed Aug 07, 2013 5:41 pm
by Scruffy
Here is mine, fairly simple which is good, since some of my builds seem to be over complicated

. It dose the job though and I like it

Re: Lets see your modelling work areas
Posted: Wed Aug 07, 2013 5:46 pm
by Coen
Is that a piece of marble tile?
Re: Lets see your modelling work areas
Posted: Wed Aug 07, 2013 5:52 pm
by Scruffy
Coen wrote:Is that a piece of marble tile?
Yes it is, just on off cut piece I picked up. I use it when I soldier and also when putting assemblies together as it is flat and true, helps make sure all the wheels are touching the ground etc.
Re: Lets see your modelling work areas
Posted: Wed Aug 07, 2013 6:15 pm
by Lysion
Scruffy wrote:Here is mine, fairly simple which is good, since some of my builds seem to be over complicated

. It dose the job though and I like it
Really nice!

You need more shelves tho

Re: Lets see your modelling work areas
Posted: Wed Aug 07, 2013 6:41 pm
by Scruffy
Lysion wrote:Scruffy wrote:Here is mine, fairly simple which is good, since some of my builds seem to be over complicated

. It dose the job though and I like it
Really nice!

You need more shelves tho

I know, but I hesitate to build a bigger paint rack as the end of the table is against one wall and the front of the table (where the paint rack is) is aginst another and the white walls help reflect what light I have, I really need to add more lighting though.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 12:13 am
by Coen
Cool idea with that tile, the simplest things sometimes make the best tools.
I like that paint shelf too. I wouldn't mind having something like that for all my paints.
Mine are so disorganized.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 1:24 am
by Scruffy
Coen wrote:Cool idea with that tile, the simplest things sometimes make the best tools.
I like that paint shelf too. I wouldn't mind having something like that for all my paints.
Mine are so disorganized.
Mine are too!!! I can't fit them all on the shelf

I made that paint rack, Home Depot has these strips of Ash, 1/4"" thick, and about 2" wide. I cut the dividers between the shelves based on the height of several different paint bottles and put it together with wood glue and brads. Only took probably no more than an hour and a half.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 1:49 am
by Coen
I may have to take a trip over to Home depot this weekend and see what I find.
Cool, thanks.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 2:22 am
by Scruffy
Coen wrote:I may have to take a trip over to Home depot this weekend and see what I find.
Cool, thanks.

Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 3:00 am
by McLeod
I wish we had a home depot type place over here.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 10:17 am
by Paul
McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol

Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 11:52 am
by Gav0909
Paul wrote:McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol

You tell him Paul!
The issue I have with being able to make things like that is the desk I have. Its a PC desk, which is quite good for modelling, until a certain point. And I have reached the space limitations of it now.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 12:49 pm
by Paul
Gav0909 wrote:Paul wrote:McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol

You tell him Paul!
The issue I have with being able to make things like that is the desk I have. Its a PC desk, which is quite good for modelling, until a certain point. And I have reached the space limitations of it now.
If I were to make a modelling workspace I would do it just as I have it in my workshop, go to wickes and for less than £80would get you 2m kitchen work top and two kitchen drawer units, I know it s £80 but a decent pc desk can cost that and won't last half as long
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 3:15 pm
by McLeod
Paul wrote:McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol

Home depot seem to do loads of stuff more tailored to the hobbyist though.
if I go into a B&Q near me for a craft knife they try and sell me a kitchen lol
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 3:18 pm
by Paul
McLeod wrote:Paul wrote:McLeod wrote:I wish we had a home depot type place over here.
What like B&Q, Homebase etc lol

Home depot seem to do loads of stuff more tailored to the hobbyist though.
if I go into a B&Q near me for a craft knife they try and sell me a kitchen lol
Have you been in shops called "the range" there quite good too.
Re: Lets see your modelling work areas
Posted: Thu Aug 08, 2013 4:00 pm
by McLeod
Not yet, just checked and there is one in Canterbury, which is fairly close, will check it out at some point.
Re: Lets see your modelling work areas
Posted: Thu Aug 15, 2013 3:21 pm
by 5Craven
I have recently relocated my work area as how we have the house organised is still changing after we moved in just over a year ago. As you can see I am still sorting it out whilst trying to get my group build finished for the looming deadline. The Microwings build is being done by my daughter who has been inspired by the 'Medieval Cottage' scratch-build she did for school.

Re: Lets see your modelling work areas
Posted: Thu Aug 15, 2013 3:33 pm
by Paul
Great stuff, nice to see your daughter involved too

Re: Lets see your modelling work areas
Posted: Thu Aug 15, 2013 5:49 pm
by Coen
Most awesome.
I can only hope that I can inspire my two little ones to hobby up.
My oldest gave it a whirl but girls and beer......
Maybe he'll come back.
It's so rewarding to be able to share like that with your kids Dude.
I'm envious.
Re: Lets see your modelling work areas
Posted: Fri Aug 16, 2013 12:19 pm
by Gav0909
My gf painted part of a Harrier pink last night.....
Looks like a good wee area you have there mate.
Re: Lets see your modelling work areas
Posted: Fri Aug 16, 2013 7:57 pm
by Coen
Pink?
Oh dear.
Was it the dog, bird, or the plane?
If it was the former... I think you have a lot of cleaning and explaining to do to someone.
Re: Lets see your modelling work areas
Posted: Fri Aug 16, 2013 9:10 pm
by longlance67
Here's my little island of sanity in the shed after years of destroying my room's floor with paint and glue its one of the rare photos of it tidy :p

[/URL]
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 1:15 am
by Coen
You know... I think that we keep Lazy Susan in business. I see so many of them one our benches.
Nice pipe Shane.
I used to smoke one years ago but I quite smoking so its a decoration now.
Excellent work space... it looks very well loved and used.
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 1:50 am
by longlance67
thanks coen, got a small collection of pipes, tend to get a lot of funny looks on the street when people see me smoking it but i enjoy it funny though i don't smoke cigarettes
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 7:51 am
by McLeod
mmmm pipes, that brings back some memories, I used to love Clan Aromatic tobacco, thinking about ditching ciggies and going to a pipe again, so much more civilised

Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 9:11 am
by Coen
I've always hated the smell of cigarettes and I hate the sight of all the butts on the ground.
Since I quit I've become a bit of a that geezer from down the road about out sometimes.
I've always loved the smell of a good pipe though. That's why I smoked one I guess.
People give me funny looks cause I'm ugly and my mum dresses me funny.

Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 1:45 pm
by longlance67
McLeod - funny you should mention Clan its my pack of choice its the nicest smoke of the tobaccos I have available here, tried condor too but always found it very rough and after a while of smoking it you'd almost have a smoke screen made ahaha
Coen - Im well used to the funny looks from being the "that group" in school, the hairy guys dressed in black, chains and listen to metal, though my metal head days are behind me, I find the pipe still brings the character without having dress head to toe in black

Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 2:17 pm
by Lee
I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban

Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 3:12 pm
by Paul
Lee wrote:I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban

Used to buy my old man those mate, quality cigar and not too expensive either. I used to hate the smell of cigars i used to stink of stale cigar smoke everyday working with him, lost him to cancer 4 years ago and love the smell when i catch it in the air now.
Weird thing is every now and then when im alone and i know for a fact no-one is around, i get a unmistakably faint smell of cigars around me.......
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 5:02 pm
by longlance67
most I can afford cigar wise are Hamlets hahaha
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 9:10 pm
by alextheblue
Paul wrote:Lee wrote:I used to smoke cigarettes (20 a day) but gave up 7 years ago when my son was born. Just smoke the odd cigar now - Habanos only though, can't stand anything other than Cuban

Used to buy my old man those mate, quality cigar and not too expensive either. I used to hate the smell of cigars i used to stink of stale cigar smoke everyday working with him, lost him to cancer 4 years ago and love the smell when i catch it in the air now.
Weird thing is every now and then when im alone and i know for a fact no-one is around, i get a unmistakably faint smell of cigars around me.......
I hear what you're saying Paul. Lost my mum recently and swear blind I can smell her perfume at times. Our sense of smell is our strongest cognitive sense to the point when we are born we recognise our mothers by her smell apparently.
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 9:22 pm
by McLeod
longlance67 wrote:McLeod - funny you should mention Clan its my pack of choice its the nicest smoke of the tobaccos I have available here, tried condor too but always found it very rough and after a while of smoking it you'd almost have a smoke screen made ahaha
Yeah its weird I tried loads of different baccy's, used to order taster packs online where you'd get a variety of different little samples, some of them were realy good, but I always went back to Clan, I think its becasue I grew up around it so the smell was imprinted on my brain lol
Re: Lets see your modelling work areas
Posted: Sat Aug 17, 2013 10:50 pm
by longlance67
it does have a lovely air to it, and also i found when out in the countryside with mates it keeps the miggies away

Re: Lets see your modelling work areas
Posted: Sun Aug 18, 2013 1:06 am
by Coen
The only reason that I even smoked my pipe is because it was my Grandfather's.
He was my best friend and personal hero when I was a kid, and I wouldn't be who I am today if it weren't for him.
So the smell of pipe smoke... Irish Mead is what he smoked or Sail once in a while, is very special to me.
I can understand your sudden fondness of cigar smoke Paul, and your Mum's perfume clinging to you Alex.
It's also good for keeping the miggies away like the man said. haha.
Re: Lets see your modelling work areas
Posted: Sun Aug 18, 2013 1:35 am
by longlance67
Coen - that is very touching about your grandfather, I think often we owe a great deal to our family members for becoming the people we are now, speaking of family keep safes I was recently given an old pipe rack by my uncle (the person who got me into the hobby) with an array of very old pipes that he collected over the years and one that belonged to my great grandfather
I dont dare to smoke from it
Re: Lets see your modelling work areas
Posted: Sun Aug 18, 2013 2:17 am
by NovYank
Hate to be a party pooper but...
Hope someone gets the reference.
Re: Lets see your modelling work areas
Posted: Mon Aug 19, 2013 11:10 pm
by SiDennis
Here is my modest man cave, I live in forces accommodation, so am lucky enough to have a garage . This is my small piece of heaven!!

Re: Lets see your modelling work areas
Posted: Mon Aug 19, 2013 11:17 pm
by T3hGuppy
Nice space you've got their.
Re: Lets see your modelling work areas
Posted: Mon Aug 19, 2013 11:19 pm
by Paul
Yeah nice tidy work area, thanks for sharing
Re: Lets see your modelling work areas
Posted: Mon Aug 19, 2013 11:33 pm
by Coen
So clean!
My eyes.... They ca't take it... Ahhh
Sweet work area dude, it's so organised.
Re: Lets see your modelling work areas
Posted: Tue Aug 20, 2013 12:47 am
by longlance67
really neat and shinny !
cool workspace
Shane.
Re: Lets see your modelling work areas
Posted: Tue Aug 20, 2013 3:01 am
by coladito1
now that is one nice and clean area!!

Re: Lets see your modelling work areas
Posted: Wed Aug 21, 2013 12:01 am
by SiDennis
She who must be obeyed ordered me to tidy up the garage
It's not normally that clean and tidy.
Re: Lets see your modelling work areas
Posted: Wed Aug 21, 2013 7:17 am
by NorthernSwede
Well here is my retreat from the world.
First area is really for heavier stuff than a model but sometimes it´s nice to just stand up and build a little while.
Second is where i´ll be painting and weathering etc.
And last is where i´m building the stuff
Everything is not finished yet, i´m missing shelves for paint and more toolholders on my building desk but it´s getting there.
Re: Lets see your modelling work areas
Posted: Wed Aug 21, 2013 8:28 am
by McLeod
Impressive looking man cave you got there - the A-Team could drive a car in there and then drive a tank out lol

Re: Lets see your modelling work areas
Posted: Wed Aug 21, 2013 9:16 am
by Coen
Hahahahahahahaaaa
Good one !!!!