Page 8 of 47
Re: Lets see your modelling work areas
Posted: Fri Sep 27, 2013 6:47 am
by Radzy
Coen wrote:That's a great workspace Radzy.
Lots of room... and it's so freaking neat... what's with all these neat spaces... sheesh.
Mine's a mess even on a good day.
Thanks Coen. Normally when I build it's a mess too. It looks clean because I had to move all stuff around, pack my sister's old rumble and get it ready for CWE GB. So no worries, soon it will be "even more man cave"
@greg74
Thanks. Btw - your cave is also dobrze rozplanowana ( well organised)
Regards,
Radek
Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 10:34 pm
by Rob
This was all Mrs Bob's idea! My wife is a keen crafter - shameless plug:
http://castlekellycrafts.blogspot.co.uk
https://www.facebook.com/pages/Castle-K ... 42?fref=ts
One day she said - why don't we build a craft room in the garden to replace the ramshackle old shed: if you insist, says I!
So, one 14'x8' build later, a man and lady den built for two
My old slot in a bedroom
My slice of Marital bliss...

Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:22 pm
by wappynutter
Ooooow.... all shiny wood too...
Got that fresh wood smell and everything....
Nice den dude..... wish my wife was a keen hobbyist but alas her only vices are Facebook and busybodying...
She wakes me in the morning with the news of the day and a run down on facebook posts...
Good job I love her unconditionally and wouldn't swap her..... I have saved £100's of pounds not having to buy the daily papers....
Yes that's a nice marital cave mate, well done on building it too...

Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:29 pm
by ridgers22
i envy all your work areas mines is restricted to a corner of my bed room haha
Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:32 pm
by wappynutter
Me too Ridgers...... Me too......

...
Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:38 pm
by ridgers22
wappynutter wrote:Me too Ridgers...... Me too......

...
sad times all round

but maybe 1 day
Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:41 pm
by Paul
Great workspace rob, hope you and your wife enjoy it
Re: Lets see your modelling work areas
Posted: Tue Oct 01, 2013 11:54 pm
by wappynutter
ridgers22 wrote:wappynutter wrote:Me too Ridgers...... Me too......

...
sad times all round

but maybe 1 day
True......but don't fret over where you build ridgers....
just remember matey....
" a magnificent man cave makes a modelling master not".......
You can have a huge purpose built cave, or a little computer desk in the corner of the bedroom..... Its you that makes it great, not where you built it.....
Enjoy your time with the plastic and glue my friend....

Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 1:14 am
by Coen
That place it magnificent Rob.
Absolute awesome. All that light!!!
Love that exhaust extractor too.

Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 8:29 am
by WebbyNZ

for the cave rob
and

for the wife supporting ya hobby cause at the end of the day as much as we do this for ourselves its the support of friends, family, loved ones and communites like this that allow us time to spend on the bench.
Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 10:54 am
by Gav0909
Ridgers, my current work area is also my PC desk (and a small desk) in the corner of the bedroom. The joys of living in a one bedroom flat. If I lived here alone, then the living room would have a bigger desk etc in it, since I don't just sit and watch TV. But alas I live with my gf, wonderful as she is, which means I am relegated to the bedroom corner.
When we move though, I am making sure that before we sign a lease on anywhere, that it either has a spare room I can turn into a man cave, or preferably a box room, or even a large walk in closet which I can make into my space.
Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 3:59 pm
by ridgers22
ok guys so here is my ''man cave'' haha
thought id just bite the bullet and show you all
i know its a bit messy but i never clean it when im in the middle of a build so it really only gets cleaned once a month

Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 9:11 pm
by Coen
It looks like its been used by a scale modeller Ridgers...
You should find him and make Him clean it up.
Must be a prodigious builder... look at that stuff... wow.
And how many air brushes does this guy need??
Sheesh.
You know... he's probably got Glue on his fingers and paint on his face... and I'll be he annoys his Mum.
hahah
A cozy little work space buddy. As long as it works for you it's awesome.
Mine was a board on the end of the kitchen table until a couple of years ago.
So nothing to be ashamed of.
The mess just means you've been working.

Re: Lets see your modelling work areas
Posted: Wed Oct 02, 2013 11:58 pm
by ridgers22
haha thanks ill try get him to clean it but hes always busy lol. yeah its my little corner of sanctuary and at least i know were everything is... most of the time

Re: Lets see your modelling work areas
Posted: Thu Oct 03, 2013 1:34 am
by Coen
Lucky you... I can never find anything in mine.
Re: Lets see your modelling work areas
Posted: Thu Oct 03, 2013 6:19 am
by fly1ngdutchm4n
ridgers22 wrote:ok guys so here is my ''man cave'' haha
thought id just bite the bullet and show you all
i know its a bit messy but i never clean it when im in the middle of a build so it really only gets cleaned once a month

Nice little workspace you got there Ridgers
I have to clean up after every time I did some work to my models. I'm sitting at the dinnertable in our living room.
Sometimes that's annoying to clean up in the middle of a build, must be careful not to break or lose parts.
You got yourself a organised chaos!
Cheers!

Re: Lets see your modelling work areas
Posted: Sun Oct 06, 2013 8:46 pm
by Hanger2
Here's an old pic of my modelling area

Re: Lets see your modelling work areas
Posted: Sun Oct 06, 2013 8:55 pm
by ridgers22
that is a nice work space.. i might steal some off your ideas for mine

Re: Lets see your modelling work areas
Posted: Sun Oct 06, 2013 9:17 pm
by Paul
Great workspace Geoff

Re: Lets see your modelling work areas
Posted: Sun Oct 06, 2013 11:08 pm
by Hanger2
Thanks I will take a more up to date one and post, once I've tidied it up.
Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 12:55 am
by Coen
Wow look at all the light you have. That's a great space Geoff.
It's too neat though. Go build something... haha
Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 4:53 pm
by Jan01
Here is my place, this is how usually looks while work is in progress
Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 5:24 pm
by Gav0909
Nice space there Jan. I have one of those Ikea lights, but I think I could do with a new bulb in mine, it seems rather yellowish of late and its not great really. So will prob look to get a daylight lamp sometime.
Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 5:32 pm
by Jan01
Thanks Gav, I bought a spare when I got the lamp and the table is also from ikea

Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 5:36 pm
by Paul
Great work area Jan
Re: Lets see your modelling work areas
Posted: Mon Oct 07, 2013 8:25 pm
by Coen
I like the black and white lines on the walls. Very M.C. Echer.
Again with the neat and clean... wow. All these clean work areas.
Re: Lets see your modelling work areas
Posted: Tue Oct 08, 2013 1:56 pm
by Hanger2
Here are some more updated pics of The Hanger.

Painting a few Value Gear bits of stowage

Spray booth and entertainment area. Excuse the socks.

Kitchen magnetic knife holder very useful for holding tools, etc.
Geoff
Re: Lets see your modelling work areas
Posted: Tue Oct 08, 2013 2:22 pm
by Coen
That's a really great space Geoff.
Lots of natural light too for photography.
It's still too neat though haha.
Re: Lets see your modelling work areas
Posted: Tue Oct 08, 2013 2:31 pm
by Hanger2
Thanks Coen, I do try to keep things tidy, doesn't work sometimes, on the opposite wall is this computer desk so with a 180 chair swivel it's easy to find ref pics and info from it and the folders and books on the shelves above.
Geoff
Re: Lets see your modelling work areas
Posted: Wed Oct 09, 2013 5:11 am
by Dunno
I finally have a home for my hobby after we moved to a new house 6 mths ago. I have set up in an alcove of the garage with one large table and a small desk for the spray booth. Still acquiring tools and paints as needed.


Re: Lets see your modelling work areas
Posted: Wed Oct 09, 2013 9:56 am
by Coen
Wow Chris, that's more than I ever had when I first started out.
Nice Dude.
You're very lucky!!!

Re: Lets see your modelling work areas
Posted: Wed Oct 09, 2013 12:45 pm
by Dunno
Thanks Coen,
A lot of birthday presence, saving money and looking for bargains, as well as scrounging everyday things that are useful. Having one dedicated place to work and set up is so much easier that only having a fold out table in the lounge room in our old house.
Re: Lets see your modelling work areas
Posted: Wed Oct 09, 2013 1:32 pm
by wappynutter
Nice workspace Chris.
My only concern and something us Brit's don't have to worry about is all the Huntsman, black widows, snakes and critters that could "hide" in those dark corners under the worktop....
Being in the garage I'm sure they manage to get in there?
Can you tell I am a bit of a phobic?
Hate spiders, they so fast and all legs and fangs.....
Other than that you a lucky guy having such room and space to work undisturbed.
Happy modelling mate.

Re: Lets see your modelling work areas
Posted: Sat Oct 12, 2013 6:20 am
by coladito1
Nice work areas guys!!

Re: Lets see your modelling work areas
Posted: Sat Oct 12, 2013 6:48 pm
by pikos
Well, I must say I'm impressed! Lots of great workspaces here. Many of you have been an inspiration too, so the pics a post here are for now. There are going to be changes in the near future dear friends

Re: Lets see your modelling work areas
Posted: Sat Oct 12, 2013 6:56 pm
by greg74
looks like a quiet and peaceful place

- it looks nice, sure you feel comfortable and there is a lot of job satisfaction and this is what comes after us all - this place is a - great - congratulations

Re: Lets see your modelling work areas
Posted: Sat Oct 12, 2013 8:40 pm
by Coen
That's a great space Dimitris, and it's sooo neat.

Bah.. where's the dirt??
Soo clean.

Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 6:19 am
by pikos
Thanks Greg. It's a quiet place for sure - when Stefanos (my 4 years old son) isn't home
Coen I must admit it... It was not a spontaneous photograph. I was cleaning the place for 2 days prior to shooting. Should see it now
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 8:38 am
by Coen
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 8:42 am
by Schoof
Wow...... if i ever could enter in to your man cave i would stand in front of your left wall for days just looking and drooling!!!!
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 8:45 am
by Coen
Haha.
There's a video of the whole monstrosity on my channel, you can see all of them if you want.
It's a bit long and boring though. It's called the man cave I think.
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 8:50 am
by Schoof
i seen that already

but a video or in real is a big difference
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 9:03 am
by Nige201980
Always looking at your man cave its what i aim for lol
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 11:54 am
by Gav0909
With my future man cave I simply wish for 3 main things.
1. A nice big desk with plenty of room on it for modelling, as I currently only have the pull out tray on a PC desk, and a small PC desk for it.
2. Proper, efficient, useful storage space for paints, tools etc.
3. Plenty of display space, either in glass cabinets, or shelves similar to Coens.
Luckily my Dad is a very good carpenter so I am sure I could coax him into helping me make some shelving, even a custom desk etc in order to make it cheaper.
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 12:02 pm
by Tonygol
I used IKEA Desk tops. About £7.
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 3:13 pm
by Schoof
wow Tony. ...DAT stash
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 4:47 pm
by andreb87
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 5:02 pm
by Coen
Holy lord liftin' muther of crap! Andre! What a stash!
Great space too!!
Wow!

Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 5:05 pm
by Paul
Great workspace and stash, thanks for sharing
Re: Lets see your modelling work areas
Posted: Sun Oct 13, 2013 8:26 pm
by NorthernSwede
Holy crap, great workspace and impressive stash.