Re: Trumpeter 1/35 AS 90
Posted: Sun Oct 18, 2015 3:39 am
This is coming along nicely.
Thanks Mate!!!TheTroyster wrote:This is coming along nicely.
Global Scale Modeller
Scale Model & Modelling Forum
https://dev.globalscalemodeller.com/
Trumpeter 1/35 AS 90
Page 2 of 2
Re: Trumpeter 1/35 AS 90
Posted: Sat Oct 24, 2015 1:44 pm
Re: Trumpeter 1/35 AS 90
Posted: Sat Oct 24, 2015 1:54 pm
The same technique that was used at the turret, I also used at the hull.
Ups...I have forgotten to paint the small parts on the rear of the turret.
Ups...I have forgotten to paint the small parts on the rear of the turret.
Re: Trumpeter 1/35 AS 90
Posted: Sun Oct 25, 2015 11:29 am
Let me give the soldier a bit of color. For better handling, I glued this comrade with blue-tack on a little paint can.
On one photo you can already see the shining howitzer. I have treated her with clear lacquer. You can apply the decals easier and avoid silvering.
On one photo you can already see the shining howitzer. I have treated her with clear lacquer. You can apply the decals easier and avoid silvering.
Re: Trumpeter 1/35 AS 90
Posted: Sun Oct 25, 2015 11:34 am
Re: Trumpeter 1/35 AS 90
Posted: Sun Oct 25, 2015 11:37 am
AS-90D - Modified for desert use. Thermal protection for crew and extra cooling for engine and machinery. Tracks adapted for reduced wear in sandy conditions.
AS-90 "Braveheart" - Basically the AS-90, but fitted with the 52 calibre length gun. This project was terminated due to non-compliant propellant charges.
Haubicoarmata "Krab" - (eng. Howitzer-cannon Crab) Licensed "Braveheart" turret on a K9 Thunder chassis, with modern "Azalia" BMS. Designed and integrated in Poland, by Huta Stalowa Wola and WB Electronics. Two Krab ("Crab") prototypes were built in 2001, and successfully completed all required evaluations and state acceptance trials. Initial serial production started in 2008, with eight units delivered to Polish Land Forces for testing. In 2014 production of Krab chassis was forwarded to Korean Samsung Techwin, which will provide 120 units, replacing Polish build UPG chassis in serial vehicles.
AS-90 "Braveheart" - Basically the AS-90, but fitted with the 52 calibre length gun. This project was terminated due to non-compliant propellant charges.
Haubicoarmata "Krab" - (eng. Howitzer-cannon Crab) Licensed "Braveheart" turret on a K9 Thunder chassis, with modern "Azalia" BMS. Designed and integrated in Poland, by Huta Stalowa Wola and WB Electronics. Two Krab ("Crab") prototypes were built in 2001, and successfully completed all required evaluations and state acceptance trials. Initial serial production started in 2008, with eight units delivered to Polish Land Forces for testing. In 2014 production of Krab chassis was forwarded to Korean Samsung Techwin, which will provide 120 units, replacing Polish build UPG chassis in serial vehicles.
Re: Trumpeter 1/35 AS 90
Posted: Mon Oct 26, 2015 12:04 am
Yes! Keep going young master...
Re: Trumpeter 1/35 AS 90
Posted: Thu Oct 29, 2015 4:21 pm
Very nice work there mate
Re: Trumpeter 1/35 AS 90
Posted: Sun Nov 01, 2015 11:36 am
Master? Perhaps PadawanTheTroyster wrote:Yes! Keep going young master...
Thank you...
Re: Trumpeter 1/35 AS 90
Posted: Sun Nov 01, 2015 11:37 am
Cheers mategaz45 wrote:Very nice work there mate
Re: Trumpeter 1/35 AS 90
Posted: Sun Nov 01, 2015 11:50 am
Time for a few filters and washes...
I have pin-washed some edges with european dark earth.
Vents where painted with a black wash and I added some rust-streaks.
I have pin-washed some edges with european dark earth.
Vents where painted with a black wash and I added some rust-streaks.
Re: Trumpeter 1/35 AS 90
Posted: Sun Nov 01, 2015 12:10 pm
On many military vehicles you see flags on the antennas. So at my too.
I have printed me a copy on paper. Then I cut and glued the the flag with wood-glue to the antenna.
As long as the glue is not dried, the paper can be brought into the desired shape.
I have printed me a copy on paper. Then I cut and glued the the flag with wood-glue to the antenna.
As long as the glue is not dried, the paper can be brought into the desired shape.
Re: Trumpeter 1/35 AS 90
Posted: Fri Nov 06, 2015 9:30 pm
The last three construction-pictures!!! 
Re: Trumpeter 1/35 AS 90
Posted: Fri Nov 06, 2015 10:46 pm
Nice work on the flag Kev. Looking good.
Re: Trumpeter 1/35 AS 90
Posted: Fri Nov 13, 2015 6:02 pm
Cheers mate!!! Was my first try...Gav0909 wrote:Nice work on the flag Kev. Looking good.
Re: Trumpeter 1/35 AS 90
Posted: Fri Nov 13, 2015 6:03 pm
see below
Re: Trumpeter 1/35 AS 90
Posted: Thu Nov 19, 2015 4:07 am
This is done? If not get this bad boy finished cowboy, I am dying to see the finished product.
Re: Trumpeter 1/35 AS 90
Posted: Sat Nov 21, 2015 5:43 pm
[youtube]3ueOFgC9VLA[/youtube]
Thanks to the Gema I need to edit my former video. Some can not see the former video, because I have been guilty of copyright infringement. Here is the new version.
Thanks to the Gema I need to edit my former video. Some can not see the former video, because I have been guilty of copyright infringement. Here is the new version.