Global Scale Modeller

Posted: **Sat Nov 26, 2016 1:50 am**

Very nice bit of work so far. very keen on doing a bike in the near future

Posted: **Sun Nov 27, 2016 1:07 am**

kiwigav wrote:Very nice bit of work so far. very keen on doing a bike in the near future

Thanks gav

you wouldnt go wrong with any of the tamiya bikes.

Posted: **Sun Nov 27, 2016 1:46 am**

20161126_214937_zpsy1rsogw3.jpg

20161126_220414_zpsx9px2s8w.jpg

20161126_164417_zpsgvksqbdl.jpg

Posted: **Sun Nov 27, 2016 2:08 am**

20161126_222317_zpsazhppam9.jpg

20161126_225248_zpskydrfpnc.jpg

20161126_235113_zpscckq2t7t.jpg

Posted: **Sun Nov 27, 2016 2:11 am**

20161127_011121_zps0eudtvbs.jpg

20161127_011201_zpsupmgxdzx.jpg

20161127_011356_zpso1dhcs59.jpg

Posted: **Sun Nov 27, 2016 2:12 am**

20161127_011534_zpsp0v1gvkh.jpg

20161127_011632_zpsv6llpom3.jpg

Posted: **Sun Nov 27, 2016 3:53 am**

Coming along nicely there and yes a great sunset

Posted: **Sun Nov 27, 2016 9:06 am**

Looking great johnj very neat work.

Posted: **Sun Nov 27, 2016 8:02 pm**

Looking well tasty!

Posted: **Mon Nov 28, 2016 2:19 pm**

Looking great jonj .i want this kit but the wife has ask me to stop spending money .going on holiday for xmas i suppose she got a point.l sooner stay home and spend it on models lol

Posted: **Mon Nov 28, 2016 8:59 pm**

Nice detail work. You can see the time you've put into this build.

Posted: **Tue Nov 29, 2016 9:54 am**

Thanks boys. It's went together just as you would expect really (so far)

Posted: **Tue Nov 29, 2016 10:01 am**

Anothe 'pile' of parts cut off, cleaned up and primed ready for the detail painting. A good chunk of them are semi gloss black which moves it along quite quickly.

20161129_013719_zpschp79pxr.jpg

I have carbon decal stencils for other kits but there seems to be quite a bit of waste after they're cut out so i was thinking i could use it for parts of this build, we'll see !

20161128_191328_zpsxydkdgur.jpg

Posted: **Tue Nov 29, 2016 10:21 am**

Coming along nicely.

Posted: **Tue Nov 29, 2016 5:04 pm**

Davethepitch wrote:Coming along nicely.

Cheers dave

I think i could safely bet every penny i have on you having started your's already

Posted: **Tue Nov 29, 2016 5:35 pm**

Johnj wrote:
Davethepitch wrote:Coming along nicely.
Cheers dave
I think i could safely bet every penny i have on you having started your's already

HI Johnj

You would lose your bet because when my friend saw it she said it is off Santa from you know who and wrapped it up with a tag on.

No matter how much I said it was an early Christmas present she was having none of it.

Posted: **Tue Nov 29, 2016 7:40 pm**

Davethepitch wrote:
Johnj wrote:
Davethepitch wrote:Coming along nicely.
Cheers dave
I think i could safely bet every penny i have on you having started your's already
HI Johnj

You would lose your bet because when my friend saw it she said it is off Santa from you know who and wrapped it up with a tag on.

No matter how much I said it was an early Christmas present she was having none of it.

Lol ah bummer !

Posted: **Tue Nov 29, 2016 11:22 pm**

Great looking bike your doing a first class job of it John can't wait to see how this turns out.
ATB

Posted: **Wed Nov 30, 2016 8:08 am**

RossiM1 wrote:Great looking bike your doing a first class job of it John can't wait to see how this turns out.
ATB

Cheers gary

quite enjoying it so far.

Posted: **Mon Dec 05, 2016 2:07 am**

Thats pretty much the detail painting done, just the fairings to go but i think i'll need to wait till next weekend fos some daylight modeling time.

20161130_233510_zpsy7r33hh0.jpg

20161205_013734_zpsgagulawp.jpg

Posted: **Mon Dec 05, 2016 8:57 am**

You are certainly setting a high standard of modelling

Posted: **Mon Dec 05, 2016 10:28 am**

Lookin good Johnj

Posted: **Mon Dec 05, 2016 4:17 pm**

Absolutely great progress
Your sub assemblies look fantastic, cannot wait to see her all together

Posted: **Mon Dec 05, 2016 4:38 pm**

Its looking good johnj

Posted: **Mon Dec 05, 2016 4:51 pm**

I guarantee mine will not look anywhere near as good.

Posted: **Mon Dec 05, 2016 5:24 pm**

Johnj wrote:I used the Ultimate .4mm masking tape in anger for the first time with this and it worked a treat, no bleed what so ever
20161121_220340_zpse0kfsspz.jpg20161122_002038_zpsujrq6uj0.jpg

Is that purple stuff liquid mask?

Posted: **Mon Dec 05, 2016 11:01 pm**

chops1sc wrote:
Johnj wrote:I used the Ultimate .4mm masking tape in anger for the first time with this and it worked a treat, no bleed what so ever
20161121_220340_zpse0kfsspz.jpg20161122_002038_zpsujrq6uj0.jpg
Is that purple stuff liquid mask?

Thanks boys, i really appreciate the positive comments

20161205_223733_zpshe35xqdp.jpg

Posted: **Tue Dec 06, 2016 3:10 am**

Davethepitch wrote:I guarantee mine will not look anywhere near as good.

I'm not entirely sure who said this but it's probably the single best piece of advice you could give and it was - treat every piece like it's the whole kit. Scott maybe ?

This is what we were talking about the other week from my profile interests ? I think these two are three years old now and most probably out of date ! I do still enjoy the micro stuff though

20150725_214940_zpsttmexnqr.jpg

Posted: **Tue Dec 06, 2016 3:19 am**

Still a bit of detail painting to do.

20161206_025031_zpslt2grjpq.jpg

20161206_025427_zpsw7xtqnrz.jpg

20161206_025344_zpsezd9atah.jpg

Posted: **Tue Dec 06, 2016 3:20 am**

20161206_025259_zpsc6d3eyo4.jpg

20161206_025154_zpsmmml0xz3.jpg

Posted: **Tue Dec 06, 2016 9:25 am**

One word "excellent"

Posted: **Tue Dec 06, 2016 9:46 am**

What is under the full fuselage on the helicopter is it a Trex and is it belt or torque tube and they certainly look better than my Blade 200 SRX.

Posted: **Tue Dec 06, 2016 4:35 pm**

That's looking really nice mate looks like you got this one nailed

Posted: **Tue Dec 06, 2016 5:16 pm**

RossiM1 wrote:That's looking really nice mate looks like you got this one nailed

Thanks gary

you've probably noticed i've missed out the exhausts so far. The last bike i did i used one of the tamiya weathering sets and they came out really good but with this H2R the exhausts are a very prominent part of the bike and i'm not sure the weathering set would cut it this time, i was thinking alclads ?

Posted: **Tue Dec 06, 2016 5:17 pm**

I am having one of these off Santa and the standard Johnj has set will make mine look like it was painted with the brush between my toes.

Posted: **Tue Dec 06, 2016 5:27 pm**

Davethepitch wrote:What is under the full fuselage on the helicopter is it a Trex and is it belt or torque tube and they certainly look better than my Blade 200 SRX.

Hi dave, yeah, it's align mechanic's with a carbon tube drive. It's a slightly different motor and gear ratio to the 3D stuff as well. It's 12cell 5000mah giving around 7-8 min of mixed hovering and aero's.

Posted: **Tue Dec 06, 2016 6:02 pm**

I mostly learn fly at night

Dave

Posted: **Tue Dec 06, 2016 6:07 pm**

Yeah, it shows up well dave

Posted: **Tue Dec 06, 2016 6:10 pm**

Hi John, Alclad is the way I would go with the exhausts, starting with polished aluminium or chrome followed by a dusting around the down pipes of pale burnt metal, hot sepia, then I mix Tamiya clear blue and red to make a purple ish blue heavily thinned down about 70% thinner to paint, and again just dusted on the down pipes from the manifolds.
ATB

Posted: **Tue Dec 06, 2016 6:19 pm**

Parts D37 and 38 are to be painted gun metal where the handle bars attach to. The fit was so tight i had to take the paint and primer back off but after that they slipped on

Posted: **Tue Dec 06, 2016 7:16 pm**

Can the Alclad paints be brushed on the exhaust pipes.

Posted: **Tue Dec 06, 2016 7:22 pm**

I wouldnt have thought so dave, you wouldnt get the soft edge. What i'll do is use the weathering set on the chromed kit parts to see what that would look like before i strip off that chrome plating for the alclads.

Posted: **Tue Dec 06, 2016 9:39 pm**

Lovely Jubbly. Getting better and better with every update.

Posted: **Tue Dec 06, 2016 9:53 pm**

Plopper wrote:Lovely Jubbly. Getting better and better with every update.

thanks dave

i've just had a bit of an accident, the bike has just fell over and broke off the right hand handlebar ! Not the end of the world but definately a pain. I might even post the fix if it might help someone else.

Posted: **Tue Dec 06, 2016 10:17 pm**

This 0.4mm Ultimate masking tape is brilliant stuff

20161206_215751_zpsfnwhwzkl.jpg

20161206_220556_zpsmtahkkhj.jpg

Posted: **Wed Dec 07, 2016 1:04 am**

it is a great masking tape for them jobs

really enjoying this build. coming along leaps and bounds

Posted: **Wed Dec 07, 2016 8:52 am**

NorthernModeller wrote:it is a great masking tape for them jobs really enjoying this build. coming along leaps and bounds

Cheers Ivan. The only downside is a the usuall tricks dont seem to work if you 'loose' the end. I struggle even with good light a magnifier and a new blade. The 'step' is so small.

Of coarse there is every chance it's just me lol

Posted: **Wed Dec 07, 2016 1:39 pm**

RossiM1 wrote:Hi John, Alclad is the way I would go with the exhausts, starting with polished aluminium or chrome followed by a dusting around the down pipes of pale burnt metal, hot sepia, then I mix Tamiya clear blue and red to make a purple ish blue heavily thinned down about 70% thinner to paint, and again just dusted on the down pipes from the manifolds.
ATB

Hi Gary, yeah, i have a few of those mixed paints that i've made up over the year's for the exhausts. Another one that looks good is clear yellow mixed with smoke.
I put in an order to emodels last night for some alclads to try

Posted: **Wed Dec 07, 2016 1:51 pm**

What can one say awsome mate

Posted: **Wed Dec 07, 2016 9:23 pm**

Johnj wrote:
Plopper wrote:Lovely Jubbly. Getting better and better with every update.
thanks dave i've just had a bit of an accident, the bike has just fell over and broke off the right hand handlebar ! Not the end of the world but definately a pain. I might even post the fix if it might help someone else.

OUCH I did that years ago with my NSR 500, I'd JUST finished it "on the kitchen table back in those days" got up to hand it to my nephew who was visiting to have a look and it just jumped out of my hands from about elbow height! And miracle of miracles only a foot rest and a bit of exhaust came off and were very quick repairs!

Global Scale Modeller

Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R

Re: Tamiya's kawasaki ninja H2R