Global Scale Modeller

Posted: **Thu Dec 24, 2020 6:35 pm**

It's coming along very nicely! An amazing amount of the cockpit is visible with the door open.

Posted: **Thu Dec 24, 2020 10:29 pm**

Spitfire on the half shell

Merry Christmas Everyone

Posted: **Sat Dec 26, 2020 11:36 pm**

Upper surfaces primed in Ultimate Gelb
Lower surfaces primed Ultimate white 80% + RAF Sky 20%
I like the lighter underbelly colour and dislike the baby puke full on RAF sky

Posted: **Sat Dec 26, 2020 11:47 pm**

Powering along, I wouldn't have thought your mojo suffered a hit at all. Very nicely applied primer coats very even and smooth...very nice and love the engine work.

Posted: **Sun Dec 27, 2020 3:12 am**

digger303 wrote: Sat Dec 26, 2020 11:47 pm Powering along, I wouldn't have thought your mojo suffered a hit at all. Very nicely applied primer coats very even and smooth...very nice and love the engine work.

Thank you my Aussie friend

Posted: **Sun Dec 27, 2020 5:42 pm**

Nice progress! The paint looks great

Posted: **Sun Dec 27, 2020 6:27 pm**

Got her tummy painted up
Not sure why I didn’t just glue fuselage and wings together first and fill seams; am imagining some wrestling to get it all together
OH HELL

Posted: **Mon Dec 28, 2020 12:19 pm**

More lovely detailing there Scott

Posted: **Tue Dec 29, 2020 12:51 am**

Nice work with the paint!

I just watched a great documentary on Netflix about the Spitfire called "Spitfire: The Plane that Saved the World." Seeing the great men and women who flew these planes is the kind of thing that makes my eyes sweat.

Posted: **Tue Dec 29, 2020 9:42 am**

BigWall wrote: Tue Dec 29, 2020 12:51 am Nice work with the paint!

I just watched a great documentary on Netflix about the Spitfire called "Spitfire: The Plane that Saved the World." Seeing the great men and women who flew these planes is the kind of thing that makes my eyes sweat.

That's one of the things I love about the hobby. The context and the history. I like a bit of sci-fi because I'm a Star Wars fan but working on WW2 kits really does it for me.

And you cant beat a Spitfire, lovely build so far Scott. Get the cement mixer ready for those joins though!

Posted: **Wed Dec 30, 2020 4:08 am**

Stokesy44 wrote: Tue Dec 29, 2020 9:42 am
BigWall wrote: Tue Dec 29, 2020 12:51 am Nice work with the paint!

I just watched a great documentary on Netflix about the Spitfire called "Spitfire: The Plane that Saved the World." Seeing the great men and women who flew these planes is the kind of thing that makes my eyes sweat.
That's one of the things I love about the hobby. The context and the history. I like a bit of sci-fi because I'm a Star Wars fan but working on WW2 kits really does it for me.

And you cant beat a Spitfire, lovely build so far Scott. Get the cement mixer ready for those joins though!

Oh indeed, lots and lots of filler
Three types so far and there will be more
Just did a light primer spray over the top fuselage seams and have a hit to go
Wing assembly will be interesting
C’est la vie

Posted: **Wed Dec 30, 2020 7:04 am**

Lovely work mate! Hope you had a great Christmas, too!

Posted: **Wed Dec 30, 2020 7:31 am**

LWWales wrote: Wed Dec 30, 2020 7:04 am Lovely work mate! Hope you had a great Christmas, too!

Bud
Thanks and You too mate

Posted: **Wed Dec 30, 2020 3:55 pm**

Love that "half-shell" shot - the detail on the engine just pops out in that one.

Lovely stuff mate - looking forward to the paintwork progressing once the plastering is completed on those joins

Posted: **Fri Jan 01, 2021 10:43 pm**

She is coming along
Seam testing with primers before the wings glue up and fuselage

I like thigh gap

I don’t like wing gap

Posted: **Fri Jan 01, 2021 10:57 pm**

Man alive those curves!

Posted: **Sat Jan 02, 2021 1:15 am**

Stokesy44 wrote: Fri Jan 01, 2021 10:57 pm Man alive those curves!

Ya, I know right

Have always loved the look of this bird, just a gorgeous flow to her
I cemented her landing gear into down position just now, and even that has cool angles to it.

Posted: **Sat Jan 02, 2021 1:27 am**

Looking great!

First nipples, now gaps. Modelling is going to get me in trouble.

Posted: **Sat Jan 02, 2021 4:54 am**

Good looking little kit!

Posted: **Sat Jan 02, 2021 9:04 am**

Twokidsnosleep wrote: Sat Jan 02, 2021 1:15 am
Stokesy44 wrote: Fri Jan 01, 2021 10:57 pm Man alive those curves!
Ya, I know right
Have always loved the look of this bird, just a gorgeous flow to her
I cemented her landing gear into down position just now, and even that has cool angles to it.

I have 3 1/48 Spits on display in my lounge, not a day goes by that I dont see those beautiful clean lines and those wings. One is a Mk IX, the other 2 are Griffon engined birds. The Griffs are more nose heavy and have beefed up rudders but still clean and with the original wing. Beautiful

Posted: **Sun Jan 03, 2021 6:56 pm**

Fill in the gaps morning.
Attacking those openings with sprue glue, TET, styrene strips, whips and chains

A series of styrene strips fitted into the wing root gap. Hoping for minimal finish needs

Posted: **Sun Jan 03, 2021 8:25 pm**

This Revell kit needs a lot of work, great job!

Posted: **Mon Jan 04, 2021 4:28 pm**

Ooh you've called in a plasterer on this one!

That's some serious gapping you're knocking into shape there mate - nice progress though

Posted: **Mon Jan 04, 2021 5:45 pm**

Tomcat64 wrote: Mon Jan 04, 2021 4:28 pm Ooh you've called in a plasterer on this one!

That's some serious gapping you're knocking into shape there mate - nice progress though

Thanks mate

I am sure there will be ‘ghost seams’ and obvious ones too.
I will try to hide them in the dark camo

ForeverPlasticKits wrote: Sun Jan 03, 2021 8:25 pm This Revell kit needs a lot of work, great job!

Yep, she is a big old bird

Thanks for commenting

Posted: **Tue Jan 05, 2021 10:31 am**

Any one tell you "you've got a horrible gap "

BUT you've got a nice cockpit

Posted: **Fri Jan 08, 2021 1:21 am**

Battling the seams and trying to fill everything
Then I have a laugh at a funny post about the seams on an A-10 Warthog...obvious central seam right down her nose

So I look into real MkI Spitfires and find they had large root wing gaps and seams all over. Often they made fillets to cover over and smooth the seams

SO I think I am going to relax a bit and just get her smoothish and plan for paint

Posted: **Fri Jan 08, 2021 3:57 am**

Donkeywalloper wrote: Thu Dec 24, 2020 7:46 am Lovely photo Scott of family and nice to Puzzles still being completed (or not).
Really nice work on this old kit, which dates me as I was produced in 65, so the kit is in a better state than I am.
Love the Magnet work, gonna show off the great Engine Paintwork.
Take care chap and stay safe.
Happy Christmas to you all.
DW

Ahh missed your comment mate, my apologies
The puzzle indeed did get done and we worked as a team with minimal combat
I hope you had a great Christmas and New Years

Posted: **Fri Jan 08, 2021 8:39 am**

The join of the fillet to the wing surface is an existing panel line so it does give you some help. All you need is to fill the gap to create the natural level of the wing then the fillet takes over as it curves up into the fuselage.

The hardest join on the Spit is the upper engine cowl because its flat / flat over the exhausts. Hard not to destroy the surface detail (if there is any).

I built an Eduard Spit in 1/48 and the best decision I ever made was to buy a resin 1 piece cowl to replace the kit 2 piece job. I just couldnt face it!

Posted: **Fri Jan 08, 2021 11:24 am**

Interesting to see that full sized seam work...

I think you're right though - just get it to the point where it's as tidy as you're happy with and then go from there

Posted: **Fri Jan 08, 2021 6:11 pm**

Tomcat64 wrote: Fri Jan 08, 2021 11:24 am Interesting to see that full sized seam work...

I think you're right though - just get it to the point where it's as tidy as you're happy with and then go from there

Indeed

Posted: **Fri Jan 08, 2021 6:16 pm**

Stokesy44 wrote: Fri Jan 08, 2021 8:39 am The join of the fillet to the wing surface is an existing panel line so it does give you some help. All you need is to fill the gap to create the natural level of the wing then the fillet takes over as it curves up into the fuselage.

The hardest join on the Spit is the upper engine cowl because its flat / flat over the exhausts. Hard not to destroy the surface detail (if there is any).

I built an Eduard Spit in 1/48 and the best decision I ever made was to buy a resin 1 piece cowl to replace the kit 2 piece job. I just couldnt face it!

Would be great if they gave me the fillet to add into the wing root myself and cover the wing root
The panel lines may be there for the fillet, but the kit's joint is dead middle where wing meets fuselage and then has rivet detail on both sides

...which isn't accurate according to my photo, the fillet would cover all that up
But I hate destroying those lovely rivet details

Posted: **Fri Jan 08, 2021 11:09 pm**

Twokidsnosleep wrote: Fri Jan 08, 2021 6:16 pm
Stokesy44 wrote: Fri Jan 08, 2021 8:39 am The join of the fillet to the wing surface is an existing panel line so it does give you some help. All you need is to fill the gap to create the natural level of the wing then the fillet takes over as it curves up into the fuselage.

The hardest join on the Spit is the upper engine cowl because its flat / flat over the exhausts. Hard not to destroy the surface detail (if there is any).

I built an Eduard Spit in 1/48 and the best decision I ever made was to buy a resin 1 piece cowl to replace the kit 2 piece job. I just couldnt face it!
Would be great if they gave me the fillet to add into the wing root myself and cover the wing root
The panel lines may be there for the fillet, but the kit's joint is dead middle where wing meets fuselage and then has rivet detail on both sides ...which isn't accurate according to my photo, the fillet would cover all that up
But I hate destroying those lovely rivet details

I think the photos are of a model, not the real thing. On the real thing, the fillet overlaps where it meets the side of the fuselage but it abuts the wing skin, it doesn't go over it.

Posted: **Fri Jan 08, 2021 11:41 pm**

Mass production does have it's advantages.

Posted: **Sat Jan 09, 2021 7:01 pm**

Some progress. She is in her final prime layer top side
I threw on the prop and glass for photos. Some seams but overall pretty happy

I bumped her and knocked her to the floor and broke off one wheel cover and sent the tires scattering

So she stays in her bare feet until all paint is done

Posted: **Sat Jan 09, 2021 7:20 pm**

Impossible not to fall in love with that shape.

She looks smooth in that primer too.

Posted: **Sat Jan 09, 2021 11:42 pm**

Looks very slick

Posted: **Sun Jan 10, 2021 4:55 am**

Super nice work!

Posted: **Sun Jan 10, 2021 11:15 am**

Stokesy44 wrote: Sat Jan 09, 2021 7:20 pm Impossible not to fall in love with that shape.

She looks smooth in that primer too.

What he said, looking really good Scott

Posted: **Sun Jan 10, 2021 4:40 pm**

Cheers everybody

David is giving me the low down on Spitfire noses...I asked the right guy

So it is black in this era FYI

Posted: **Sun Jan 10, 2021 11:52 pm**

Nice tummy drying in the LED sun

Decent seam coverage...not perfect, but decent
This is Ultimate white primer + AK Air RAF Sky at about 50:50

Posted: **Mon Jan 11, 2021 12:20 am**

Even upside down spitfire looks beautiful.

Posted: **Tue Jan 12, 2021 6:30 pm**

I have a 1/32 Revell Seafire kit in my stash
Seriously considering doing a fast build on it to get it to the camouflage stage and paint both at the same time

Maybe
Will see how my four days off are shaping up at the end of the week

Posted: **Tue Jan 12, 2021 10:53 pm**

Twokidsnosleep wrote: Tue Jan 12, 2021 6:30 pm I have a 1/32 Revell Seafire kit in my stash

Brave man! If its the really old kit of the Griffon engined Seafire I wouldn't touch that thing with a barge pole! I've seen VCs given out for people who even attempted it

Posted: **Wed Jan 13, 2021 12:34 am**

Stokesy44 wrote: Tue Jan 12, 2021 10:53 pm
Twokidsnosleep wrote: Tue Jan 12, 2021 6:30 pm I have a 1/32 Revell Seafire kit in my stash
Brave man! If its the really old kit of the Griffon engined Seafire I wouldn't touch that thing with a barge pole! I've seen VCs given out for people who even attempted it

It is exactly the same as this Spitfire with a couple additions on it
Bit disappointed actually, it is basically a re-box same decals too

Posted: **Wed Jan 13, 2021 8:36 am**

Twokidsnosleep wrote: Wed Jan 13, 2021 12:34 am It is exactly the same as this Spitfire with a couple additions on it
Bit disappointed actually, it is basically a re-box same decals too

If you fancy another nice 1/32 Spit, the newer Revell kits are good. They do a Mk1 and a MkIX, both of which are well liked and cheap as chips.

Posted: **Wed Jan 13, 2021 10:53 am**

Stokesy44 wrote: Wed Jan 13, 2021 8:36 am
Twokidsnosleep wrote: Wed Jan 13, 2021 12:34 am It is exactly the same as this Spitfire with a couple additions on it
Bit disappointed actually, it is basically a re-box same decals too
If you fancy another nice 1/32 Spit, the newer Revell kits are good. They do a Mk1 and a MkIX, both of which are well liked and cheap as chips.

I can't find a Mk1. Is it a typo and meant to be Mk2 ?

Posted: **Wed Jan 13, 2021 8:32 pm**

digger303 wrote: Wed Jan 13, 2021 10:53 am
Stokesy44 wrote: Wed Jan 13, 2021 8:36 am
Twokidsnosleep wrote: Wed Jan 13, 2021 12:34 am It is exactly the same as this Spitfire with a couple additions on it
Bit disappointed actually, it is basically a re-box same decals too
If you fancy another nice 1/32 Spit, the newer Revell kits are good. They do a Mk1 and a MkIX, both of which are well liked and cheap as chips.
I can't find a Mk1. Is it a typo and meant to be Mk2 ?

My bad, it’s a MkII

Posted: **Sun Jan 17, 2021 4:37 am**

Small drift form the main build....doing figures

Now I have to modify the puppy to the correct version...needs some more furriness
Fortunately, I have a model to help

Posted: **Sun Jan 17, 2021 9:18 am**

It's looking very impressive!

Posted: **Sun Jan 17, 2021 1:49 pm**

Coco looking at you giving encouragement as if to say...."come on I look better than that"

The scene is going to look good

Global Scale Modeller

1/32 Tamiya Merlin engine, Aires Cockpit, Revell Spitfire

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish

Re: 1/32 Revell Spitfire Mk. I ish