Page 2 of 3

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Dec 27, 2013 10:23 pm
by Hanger2
Thanks Coen, I like the boy with bike and dog, more to see what I can get.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 12:50 am
by Andyman23
Unbelievable work :cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 2:16 pm
by NovYank
Terrific diorama idea. Quite unique and interesting!

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 3:10 pm
by longlance67
Very nice Idea for the dio, has a nice flow to it, as for the children or for adding any other Civies to the dio I would recommend giving the Civilian sets by Miniart a look see, might find them useful


Shane

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 7:56 pm
by Nige201980
This is great work Geoff love the idea for the dio.

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 9:39 pm
by JayCub
loving the work so far Geof, the diorama will be some show piece when done, looking forward to more

Tom

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sat Dec 28, 2013 11:11 pm
by Hanger2
Thank you so much Guys, I have used one of the MiniArt Civvy sets in my "Somewhere in England" dio which I posted in the next section, I liked them but thought I would like to add something different in this one, there are some good ones on the MK35 site.

http://www.mk35.com/index.php?option=co ... =1&lang=en

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Dec 29, 2013 5:11 pm
by Hanger2
The tank is finally finished, exhaust fitted and painted, Value Gear stowage in place, and all given a dusting of MiG pigments, tow cable made up from spares box.

Image

Image

Image

Image

Now to start the dio base.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Wed Jan 01, 2014 10:57 pm
by Hanger2
Base started, polystyrene to add the banking glued onto the MDF base using No-Nails, then covered with wall filler, the roadway is DAS air-drying clay into which I scribed the random cobble sections, this will now be left to dry 24/48 hours, then it will be given a coat of grey primer.

Image

The old Verlinden wall and pillar has been distressed with bullet holes.

Image

With the Locust placed in position.

Image

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Wed Jan 01, 2014 11:13 pm
by Coen
Geoff, those tarps are the best that I've ever seen!
Especially that one on the engine deck.
I also love how yore doing the cobblestone street. That I'm taking notes on buddy :).

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Wed Jan 01, 2014 11:51 pm
by Hanger2
Thanks Coen, I do like Value Gear stowage, it is the best and cheapest I have seen, and Steve has moved back to your side of the pond.

Here is his link. http://www.valuegeardetails.com/

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 12:07 am
by HWGuderian23
WOW :jd:!
Excellent work on the tank Geoff :bow:: ... it looks very nice especially the extra stowage you've added on it enhance the whole kit!
I also like your paintjob on the figures and the work you've already started on the dio base is very inspiring for me ... very well done :clap:
:cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 12:28 am
by wappynutter
:th: :th: :th: :th:
:clap: :clap: :clap:
Nicely done Geoff sir, Mike was right, those Tarpaulin covers and blanket rolls are fantastic.
Very well done indeed sir..
Thanks for sharing with us. :th:
How are the extra figure choices going??? Have you chosen the finishing touches yet?
Good luck my friend..
:cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 9:59 am
by Hanger2
Thanks Markus and Andy.

I have the Bronco War Correspondence set in stock Andy, so I might make up one of those taking a pic, early days yet.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 10:08 am
by Modelcrazy
Thats a lovely build Geoff.
Never done a Bronco kit, whats your opinion of them?

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 10:36 am
by Hanger2
Thanks Dave, this was my first Bronco build and was impressed, quite a fiddly build in places, instuctions not the best BUT then again not the worst I have used, but quality of the moulding, first class, will definitely buy another Bronco kit.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 7:24 pm
by longlance67
lovely work mate,

this build just goes from strength to strength my friend


Shane

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 7:58 pm
by Rob
Top-notch work, the dio's going to be a stunner! :cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 8:26 pm
by JayCub
Brilliant Geoff, makes my day browsing your work log the build is jut awesome.

Tom

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 8:31 pm
by Duck
What a lovely kit, backed by an amazing diorama and its not even finished! Thank you so much for sharing, I might buy myself a locust now!

Regards

Duck

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 10:49 pm
by Hanger2
Thanks Guys, appreciate your nice comments

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 11:15 pm
by Hanger2
Base primed

Image

the two figures to go with the tank, the seated one, sorry about the picture quality, is for the turret top with his feet in through the open hatch, and the other leaning against the wall.

Image

Image

Image

Image

I was amazed when I put the Locust in my storage cabinet for safe keeping and realised just how small it was. I have pictured it against a Vickers MkVIB which is quite a small tank.

Image

Image

Image

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 11:46 pm
by Duck
Im probably very wrong, but didn't it have the similar chassis to the m5 Stuart? It looks very a-like.

Regards

Duck

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Thu Jan 02, 2014 11:49 pm
by Hanger2
Similar but smaller, the Vickers is smaller than the Stuart if that helps, I have a Stuart/Honey, I will take a pic of both Stuart and Locust together, but that will be tomorrow.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 12:08 am
by Duck
Hanger2 wrote:Similar but smaller, the Vickers is smaller than the Stuart if that helps, I have a Stuart/Honey, I will take a pic of both Stuart and Locust together, but that will be tomorrow.

Geoff
Thank you, also I love the crew with the brew!

regards

Duck

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 12:18 am
by Coen
Geoff.. Did you hand paint those insignia? :eeek:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 6:12 am
by fly1ngdutchm4n
Brilliant work Geoff :clap:
really nice work on the tank, and a great dio in progress! :thumb2:
KUTGW buddy :cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 6:27 am
by Schoof
:jd: :jd: those figures. ........ Wow there beautiful

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 8:30 am
by HWGuderian23
Stunning work Geoff :jd:!
Those figures are amazing :bow::!
:cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 8:47 am
by Hanger2
Thanks Guys yet again, yes I did paint the insignia Coen.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 10:37 am
by AchtungPanzer
I was right Geoff :). The model is SUPER like real tank :thumb1: - two words : global level :bow:: . Complete Dio will be awesome.

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 10:44 am
by Hanger2
Here you are Duck, as promised, the running gear comparison between the Locust and the Stuart/Honey, as you can see similar layout but smaller.

Image

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 10:45 am
by Hanger2
Thank you AP, I hope you are right

Geoff.

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 11:21 am
by Paul
Awesome work Geoff, love the guy with the bottle, and those tanks look superb mate

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Fri Jan 03, 2014 12:08 pm
by Duck
Thanks very much! They both look very nice! And in model ;)

Regards

Duck

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 5:44 pm
by Hanger2
I wasn't happy with the first attempt of the base surface so I gave it another skim of wall filler and the road another layer of DAS, I also made a tool for impressing the cobbles from an old brush.
The base and wall given an initial coat of paint.

Image

The wall given a first wash of Dilute Artist's Oils to dull the brickwork. Roadway given a good rub of MiG pigments and then an indirect spray of matt hairspray. Cobbles picked out with individual washes of acrylic.

Image

Gate made from balsa, hinges made from the PE sets edging.

Image

Placed the Locust and a couple of figures to see how it looked.

Image

I have ordered some various grass tuft sets from FoG to glue to the earth areas, I have used these on my "Somewhere in England" dio and pleased with the end result, so now waiting for Mr Postman.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 5:52 pm
by Paul
That brickwork and gate looks damn good Geoff, excellent work mate

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 5:59 pm
by Hanger2
Thanks Paul, I think I might give the wall another oil wash, still a bit bright.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 6:01 pm
by longlance67
wow great work on the base mate, the gate really looks nice


great stuff


Shane

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 6:40 pm
by Hanger2
Thanks Shane

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 6:43 pm
by Rob
Superb! I particulay like the weathering on the wall and gate wall and gate :cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 6:45 pm
by Hanger2
decided to use up the Greenline grass tufts I had left over.

Image

Stuck now until postie delivers my order so figure painting here I come.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 6:46 pm
by Hanger2
Thanks Rob

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 8:19 pm
by Nige201980
WOW this is stunning work mate totally blown away at how life like those figures are mat amazing buddy

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 10:05 pm
by Hanger2
Thanks Nige and everyone else, I'm so pleased you all like it.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 10:41 pm
by wappynutter
You sir are just amazing.....
This diorama is gonna be simply fanbloodytastic!!!
Hurry up postie and deliver Geoff's Grass tufts...
I adore the tiny Tank, and the diorama is excellent..
Will be so good with the figures in place..
Well done indeed sir.
:thumb1:
:clap: :clap: :clap: :clap:
:cheers2:

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Sun Jan 05, 2014 11:08 pm
by Hanger2
Thanks Andy, you are too kind, I expect Wed/Thurs for the post, if FoG get it off tomorrow, they are usually pretty good dispatching stuff.
Still I have loads of figures to do in the meantime.

Geoff

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Mon Jan 06, 2014 1:00 am
by Coen
Awk!!! My eyes again.
I love that cobblestone work. I wouldn't mind seeing the brush that you modified to do that Geoff.
One of the other guys... Chief I think that it was, I'm not sure, used a piece of copper pipe to do almost the same thing.
It turned out very differently but just as wonderfully.
I love that gate door too... That came out perfectly. I love the algae on the bottom.

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Mon Jan 06, 2014 1:01 am
by JohnP
Wow wow wow! Awesome work!! Love everything about it. Nice attention to detail!!

Re: Bronco 1/35 T9E1/M22 Locust British Airborne Tank

Posted: Mon Jan 06, 2014 10:05 am
by Hanger2
Thanks Coen and John, I will take a pic of the brush Coen later for you.

Here are a few pics of a couple of figs for the dio. the War Correspondence will be taking a photograph of the escorted German POW's walking past the Locust.

Image

Image

Image

Geoff