Global Scale Modeller

Paul wrote:

chief5437 wrote:Nah, Aprils news show probably won't be up til June! Lol!

Oi my parts where all done yesterday, lees doing his today

Paul wrote:

chief5437 wrote:Nah, Aprils news show probably won't be up til June! Lol!

Oi my parts where all done yesterday, lees doing his today

That may be so, but you still haven't sent it over to me...!!!

A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

Lee wrote:

Paul wrote:

chief5437 wrote:Nah, Aprils news show probably won't be up til June! Lol!

Oi my parts where all done yesterday, lees doing his today

That may be so, but you still haven't sent it over to me...!!!

You know full well know it's being sent to you as I type this

ICESTONE wrote:A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

That's a good question, I'll answer that now though, all I'll say is why pay for anything you can get for free from the ISM forum and you tube channel

ICESTONE wrote:A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

We pride ourselves on the fact that we don't ask our members for anything except their participation. If some one can make a living out of building models, then fair play to them, BUT to do it under the guise of doing you a favour whilst charging you money has nothing to do with altruism at all!

Lee wrote:

ICESTONE wrote:A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

We pride ourselves on the fact that we don't ask our members for anything except their participation. If some one can make a living out of building models, then fair play to them, BUT to do it under the guise of doing you a favour whilst charging you money has nothing to do with altruism at all!

Couldn't agree more mate

There was also a mention (or rather a sly dig) on one of the paid channels/forums that their prizes are not donated by sponsors, that's all well and good except instead they are paid for by the members paying to watch the videos lol, so their paying for their own prizes.. At least here you do actually get prizes for free

Lee wrote:

ICESTONE wrote:A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

We pride ourselves on the fact that we don't ask our members for anything except their participation. If some one can make a living out of building models, then fair play to them, BUT to do it under the guise of doing you a favour whilst charging you money has nothing to do with altruism at all!

I don't think it was elitist, it was just the way it was.

Thing are changing rapidly. The availability of long, in-depth build videos free for all to view via high speed internet on you tube is a relatively recent phenomenon. Before that sites like Phil Flory's hosting videos or the purchase of expensive tutorials on videos or DVDs were pretty much the only game in town.

Like many on this site, I used to be a subscriber to PF and was happy to pay my 3 quid a month and I learned a lot from his builds. However, i cancelled that a month or two ago. Nowadays with the likes of Paul, Lee, Coen and others happy to spread the styrene gospel, the same or better hobby fix is beautifully free and my money stays in my pocket.

Long live ISM and viva Lee and Paul

Rob wrote:

Lee wrote:

ICESTONE wrote:A question.

What do the ISM organisers think about some of the competition charging subscriptions for watching youtube vids and using forums (flory springs to mind). Doesn't this add a more elitist feel (i.e. people with access to paypal and money) to parts of the hobby when surely we should be encouraging anybody to get involved especially a new generation.

We pride ourselves on the fact that we don't ask our members for anything except their participation. If some one can make a living out of building models, then fair play to them, BUT to do it under the guise of doing you a favour whilst charging you money has nothing to do with altruism at all!

I don't think it was elitist, it was just the way it was.

Thing are changing rapidly. The availability of long, in-depth build videos free for all to view via high speed internet on you tube is a reliably recent phenomenon. Before that sites like Phil Flory's hosting videos or the purchase of expensive tutorials on videos or DVDs were pretty much the only game in town.

Like many on this site, I used to be a subscriber to PF and was happy to pay my 3 quid a month and I learned a lot from his builds. However, i cancelled that a month or two ago. Nowadays with the likes of Paul, Lee, Coen and others happy to spread the styrene gospel, the same or better hobby fix is beautifully free and my money stays in my pocket.

Long live ISM and viva Lee and Paul

Ahh I'm all choked up rob

Coming back into the hobby I am fortunate or unfortunate to have lots of humbrol enamel paints, and most guides work with acrylics - it would be good to have a small segment on airbrushing with enamels - specifically time between coats (which is less, I believe, due to them being thinned?), and things like washes with them (if different), clean up between colours and when putting the airbrush to bed etc.

mo0g wrote:Coming back into the hobby I am fortunate or unfortunate to have lots of humbrol enamel paints, and most guides work with acrylics - it would be good to have a small segment on airbrushing with enamels - specifically time between coats (which is less, I believe, due to them being thinned?), and things like washes with them (if different), clean up between colours and when putting the airbrush to bed etc.

Sadly i don't use enamels at all, usage is to labour intensive and drying in measured in days

Thanks, Paul for the link
Mike

Hi! I have in the past, made several good aero-models. But have always been disappointed with the canopy. Will you be doing a start to finish section on how to make a realistic looking canopy. I noticed in the past Lee using Klear, And Paul shading his canopy. (F16 build) I for one would love to know how to do it properly. And not winging it. And make it look rubbish.

frack wrote:Hi! I have in the past, made several good aero-models. But have always been disappointed with the canopy. Will you be doing a start to finish section on how to make a realistic looking canopy. I noticed in the past Lee using Klear, And Paul shading his canopy. (F16 build) I for one would love to know how to do it properly. And not winging it. And make it look rubbish.

Have you checked out the techniques guide vids on our u tube channel they may help you a bit

http://intscalemodeller.com/viewtopic.php?f=193&t=4224

got one for you i see you and paul use tamiya compound (stuff) could we have a demonstration on what and how to use them please..

many thanks

Hi guys
Any chance of an idiots guide to metal barrels ( Aber ) etc , how to assemble , what glues to use
Cheers guys and keep up the fantastic work

Peter

Ok guys, my question is about compressors and airbrush booths.

I feel like I now have a pretty good understanding of what airbrushes are out there, and for what budget (thanks Paul). But I don't really know anything about the other two main elements of the airbrush set-up. Would you be able to do a short review of what's available (and what's worth the money) in terms of compressors and booths? Basically, I think I'll pick up a Harder & Steenbeck Ultra and want to get a set-up appropriate for that.

Cheers,

Jimmy

(coming back to modelling after a couple decades)

jimmypigeon wrote:Ok guys, my question is about compressors and airbrush booths.

I feel like I now have a pretty good understanding of what airbrushes are out there, and for what budget (thanks Paul). But I don't really know anything about the other two main elements of the airbrush set-up. Would you be able to do a short review of what's available (and what's worth the money) in terms of compressors and booths? Basically, I think I'll pick up a Harder & Steenbeck Ultra and want to get a set-up appropriate for that.

Cheers,

Jimmy

(coming back to modelling after a couple decades)

Hey jimmy, theres a review of a sparmax compressor from myself in last months news show and one from lee in this months show

could you do a bit about how to wire led lights and strips

Hi guys, could you consider doing a section on post shading? It is an aspect of weathering that I don't fully understand/have the nerve to try. It would be cool to see what colours, ratio's and techniques are needed, also where best to apply said things. Hope that makes sense. Lol.

benc123 wrote:Hi guys, could you consider doing a section on post shading? It is an aspect of weathering that I don't fully understand/have the nerve to try. It would be cool to see what colours, ratio's and techniques are needed, also where best to apply said things. Hope that makes sense. Lol.

Paul covered it in the aircraft techniques guide on the youtube channel
But you can find them here aswell in the seperare ism section on the board index
You should have a look ,good vids

Cheers mark. I thought I had watched them all but I'll go back and check it out.

I have a question? what happened to Septembers news show?

rustygunns wrote:I have a question? what happened to Septembers news show?

It's late mate. Will be out over the weekend - Our lives are very busy at the moment

How bout a section when you have time on debonding.
We have all at some point glued something in place, with either model glue or CA and then realise it was the wrong way, or something else had to be done first.
I'd like to hear what you guys use to go back without damaging parts or paint.

Before I post my question I'd like to thank all of you for providing significant guidance and expertise that has been invaluable for getting back into the hobby. I am still in the process of getting my man cave all set up so hope to share some projects soon. Ok, and now for my questions. Love to see a video with guidance for dealing with resin add ons and updates. I am considering purchasing some Legend Production (anyone with good or bad experience) and would like to avoid any pitfalls. Keep up the great posts and projects everyone! I aspire to catch up and be half as good as most of you.

I know you lads are busy with life and good luck to you both with your new adventures but lets start thinking about me come on you selfish pare ...how about a tip on scribing just built my second airplane and the thought of attacking it with knifes and scribbing tool scares me

So with your vast model knowledge HELP!!!!!!!

Tiger131 wrote:I know you lads are busy with life and good luck to you both with your new adventures but lets start thinking about me come on you selfish pare ...how about a tip on scribing just built my second airplane and the thought of attacking it with knifes and scribbing tool scares me

So with your vast model knowledge HELP!!!!!!!

LOL theres an entire series on aircraft modelling i did last year on the channel
http://www.intscalemodeller.com/viewtop ... 193&t=4224

Ill be fine to do a news show this month so as long as lee is too there will be one

Paul you are the man... and i think i speak for everybody on the site you both have enough going on so i think people would expect not to see one

Tiger131 wrote:Paul you are the man... and i think i speak for everybody on the site you both have enough going on so i think people would expect not to see one

Well I'm filming two reviews today as well as an f15 videos over the weekend so i think ill be fine.

Well I'm filming two reviews today as well as an f15 videos over the weekend so i think ill be fine.

That's if you get the time, with looking after the little one, changing nappies and making milk.. them was the days, can't believe my youngest son is 30 this Thursday (I need to sit down, I feel old),

Hope the F-15 episode is up this weekend tho, been waiting for ages, can't wait to complete it and then follow you on the next venture.

Stay well Sir

G :cheers2:

Can you show me how to use etch...aaaaaargfh!?

Can you do a video on building resin kits?
I have several all resin kits and quite frankly I'm intimidated by them.
I have no idea how to handle/build all resin kits.

Thanks

burnie43 wrote:Can you show me how to use etch...aaaaaargfh!?

We have a video about that on the channel already mate

This may have been covered but never hurts to ask getting back in the hobby after a long time in the military and want to see how a dot filler wash is done using oils any help or demo video would be helpful
Frank

corpsman23k2 wrote:This may have been covered but never hurts to ask getting back in the hobby after a long time in the military and want to see how a dot filler wash is done using oils any help or demo video would be helpful
Frank

Paul's just started an afv build series on the ism YouTube channel. He said (so I'm sure it's gospel!) that he would be showing how to do a dot filter. Subscribe, and keep your eyes peeled!

If you're in a hurry, Google is your friend, and I'm pretty sure there's a thread/video of Paul doing one on here somewhere, it how I learned to do it!! Cheers Paul btw!

Hey all I am brand new to the forums. I have not done any modelling to speak of since my teenage years and now that I'm *cough* 56 *cough* I really have a desire to return. With all of the information that's available here it's really hard to know where to start from a "must have" tools of the trade perspective. So....my question would be, are there absolute must haves (I understand glue, paint, etc...lol) for folks like me?


~Dan


Nothing on the bench...yet

Dan if you are building aircraft you can't beat Paul's build tutorials on the airfix 109. There is also an afv series that the ISM guys are working on, although I haven't gotten to those yet.

heel wrote:Dan if you are building aircraft you can't beat Paul's build tutorials on the airfix 109. There is also an afv series that the ISM guys are working on, although I haven't gotten to those yet.

Thanks heel! I have been watching them and they're awesome. I'm just trying to get an idea of entry level tools. I know an airbrush and associated gear are important but I don't have a ton of cash to drop. I found a nice paash (sp?) combo, dual action brush with 1/3hp piston compressor with tank for about $180. I don't know if this is good or not.

It's really cool to have a place I can go to ask these kind of questions without getting my gonads stomped on!

I started with the same setup off amazon, although I opted for a single action airbrush first to cut my teeth. The bundle had a 1/8 hp pasche compressor, hose, and cleaning tools. I bought some revlon sanding sticks and decent brush/paints. You will steadily accumulate what you need over time. You need a decent pair of sprue cutters and exacto blades. Better sanders will produce a better finish. Tamiya extra thin is a must. Rattle can primer is fine to start with, but be cautious as they spray heavy and fast. Light coats and go past the edge of the plastic. Never stop in the middle. Have fun and you'll get the hang of it in no time.

That's a relief on the airbrush rig. My plan is to get the tamiya basic toolkit and whatever color callouts come with the kit I order. I'm going to get most of the Ultimate stuff I see in Paul's vids...washes, thinners, sanders, etc., i'm seriously considering the bench PE bender I saw in one of the videos. PE is something I've never worked with before so I'll need to do my homework on that.

One thing for sure, if I have any questions, this is the go to place!

Thanks again!

Sorry - but... where is September show?

Paul put up a post on the facebook page about it
Because both Paul and Lee where very busy last month and as the August news show was later then they would have liked they decided to skip a month and do a proper one this month

Atleast that is what that post came down to

MarkVerploeg wrote:Paul put up a post on the facebook page about it
Because both Paul and Lee where very busy last month and as the August news show was later then they would have liked they decided to skip a month and do a proper one this month

Atleast that is what that post came down to

Yep Marks right, lee told me he was filming over the weekend and my news show stuff was sent to him saturday so it should be up soon

Will be uploaded tonight

Whoopie
Maybe something to watch tonight while i sort out some builds and stuff for the wishlist

MarkVerploeg wrote:Whoopie
Maybe something to watch tonight while i sort out some builds and stuff for the wishlist

lol - I doubt it mark. With my crappy internet here is takes 12 hours to upload 1GB.....!!!

Lee wrote:

MarkVerploeg wrote:Whoopie
Maybe something to watch tonight while i sort out some builds and stuff for the wishlist

lol - I doubt it mark. With my crappy internet here is takes 12 hours to upload 1GB.....!!!

Whoopie i have something to watch tomorrow
I see it when it is uploaded so i don't mind

Great! So I can see it tomorrow morning while I have my breakfast

have u had the draw 4 October yet