Sd.Kfz.9 Famo - Revell 1:72

Whether its tracked or wheeled, this is the place for it
Post Reply
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Hello !

This is my New model to work : In box total 156 parts:).
About vehicle :


Preliminary design of all the German half-tracks of the early part of the war was done by Dipl.Ing. Ernst Kniepkamp of the Military Automotive Department (Wa Prüf 6) before the Nazis took power in 1933. His designs were then turned over to commercial firms for development and testing.[5] Fahrzeug- und Motorenbau GmbH (FAMO) of Breslau received the contract for the 18 t (18 long tons; 20 short tons) heavy towing tracked vehicle. Their first prototype, the FM gr 1, was completed in 1936. It had a 200 horsepower (200 PS) Maybach HL 98 TUK engine and was only 7.7 metres (25 ft) long. The F 2 prototype appeared in 1938, but differed only in detail from its predecessor.[2]

The F 3 appeared in 1939 and was the production version. The design was simplified over the course of the war to reduce costs and the use of strategic metals. Some vehicles produced by Tatra had its 12-cylinder, air-cooled Type 103 diesel engine fitted. Large spades were added at the rear of the chassis during the war to improve the vehicle's ability to recover tanks and other heavy vehicles.[6]


Vomag of Plauen began producing the Sd.Kfz. 9 in 1940 and Tatra joined in the last years of the war. 855 were on hand on 20 December 1942. 643 were built in 1943 and 834 in 1944. Approximately 2,500 were built in total.


Image


Designer FAMO
Designed 1936–39
Manufacturer FAMO, Vomag, Tatra
Produced 1939–45
Number built approx. 2500
Variants Sd.Kfz. 9/1, Sd.Kfz. 9/2
Specifications
Weight 18,000 kilograms (40,000 lb)
Length 8.32 metres (27 ft 4 in)
Width 2.6 metres (8 ft 6 in)
Height 2.85 metres (9 ft 4 in) overall
Crew depends on body type fitted
Engine 10.8L Maybach HL 108 petrol, 12-cylinder, water-cooled
270 horsepower (270 PS)
Payload capacity 2,620 kilograms (5,780 lb)
Transmission 4 + 1 speed ZF G 65 VL 230
Suspension torsion bar
Ground clearance 44 centimetres (17 in)
Fuel capacity 290 litres (77 US gal)
Operational
range
260 kilometres (160 mi) road
100 kilometres (62 mi) cross-country
Speed 50 km/h (31 mph) road


Model :


Image


Frames with parts:



Image




Image




Image




Image
User avatar
wappynutter
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2256
Joined: Mon Jun 17, 2013 11:39 pm
Location: Sutton in Ashfield, Nottinghamshire. UK
Great Britain

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by wappynutter »

Good luck Eryk, I will be watching and learning from your build here!! :th:
All the best my friend... :thumb1:
:cheers2:
Regards Andy...Image
YouTube Channel..... http://www.youtube.com/channel/UCRdZFBjr6oO-T-2ydSB4HIg
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

:thumb2: .

Instruction :

Image




Image





Image




Image




Image


Strat todaty evening - undercarriage + wheels
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

First steps :


Image
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Next stage : tracks and almost the entire undercarriage is finished . I used 104 parts at this moment..and some paint ;). 7 hours of work altogether .

Image





Image




Image




Image



Image


:cheers2:
User avatar
Donkeywalloper
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2629
Joined: Sun Apr 13, 2014 8:06 pm
Location: Burton upon Trent
Great Britain

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by Donkeywalloper »

Hello Eryk
Long time no see mate.
Great job on this and as always your an ace producer of top notch builds.
Love your work.
Take care,
John
Bench:1/35 Tamiya Tiger 1 Mid Production with lots of Aftermarket Stuff
Completed: Vespid 1/72 Comet A10
Shelf: Lots (101 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Thanx John ! :) Nice to see You buddy . Today evening work with the "front" of the model: cabin + :cheers2:
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Undercarriage is ready - after painting and weathering :thumb2: :

Image


Image


Image

Now im start work with cabine+ (29parts). I think that 2,5 hours (gluing and painting) and this stage will be ready . Photos of result - tomorrow :mrgreen: .
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Ready:

Image


Image



Image



Image



Image


Now time for last part of this model :thumb2:
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Ready to painting after base colour.

Image
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

:welcome: MODEL READY TO "FINAL CONSTRUCTION " .Here is it 156 parts and 12 hours of work at this moment.


Image



Image


Image



Image






Image


Next stage : DETAILS PAINTING , work with decals+markings painting + chipping. :thumb2:
User avatar
wappynutter
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2256
Joined: Mon Jun 17, 2013 11:39 pm
Location: Sutton in Ashfield, Nottinghamshire. UK
Great Britain

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by wappynutter »

:jd: Excellent Eryk, looks really good buddy...
Cannot wait to see the construction and weathering/chipping effects... :clap: :th:
All the best my friend, take care.... :thumb1:
:cheers2:
Regards Andy...Image
YouTube Channel..... http://www.youtube.com/channel/UCRdZFBjr6oO-T-2ydSB4HIg
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Thank You Andy .

Guys Here is He after : details painting , decals, markings (white elements) painting and after chipping - Now this "Monster" is ready to final weathering & pinwash Battle :) (total 14 hours)


Image



Image



Image



Image



Image



Image



Image

Now yet only 2 hours - this evening I think ,that Today befor Midnight model will be end of this story :pop:
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

P.S. Markings and painting (brush's)- 11 Panzer Division Russia end of X 1941.
User avatar
PaulAyrey
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1141
Joined: Tue Feb 04, 2014 5:24 pm
Location: Worthing, West Sussex, UK
Contact:

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by PaulAyrey »

Very impressive. Great work yet again!
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Thanx for kind words Maestro .
User avatar
wappynutter
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2256
Joined: Mon Jun 17, 2013 11:39 pm
Location: Sutton in Ashfield, Nottinghamshire. UK
Great Britain

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by wappynutter »

:th: :th: :th: :clap: :clap:
Nearly finished Eryk.....
Fantastic as always buddy...well done... :thumb1:
:cheers2:
Regards Andy...Image
YouTube Channel..... http://www.youtube.com/channel/UCRdZFBjr6oO-T-2ydSB4HIg
User avatar
rodrant
Chief Warrant Officer 2
Chief Warrant Officer 2
Posts: 1774
Joined: Wed Feb 19, 2014 9:22 pm
Location: Maia - Portugal
Portugal

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by rodrant »

Again a superb build Eryk ! Funny as today I was looking for some Tiger I photos and saw one that could become a nice dio , one being pulled by two of these 'beasts' !

Admire your builds , you do such a fine job in this scale :th:

:cheers2:
Cheers ,
António

On the Bench
a lot of stuff right now :-)
User avatar
AchtungPanzer
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2299
Joined: Mon Oct 07, 2013 7:59 am
Location: Cracow PL

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by AchtungPanzer »

Thanx Guys. Is finished :pop:


Image



Image


More photos in Members gallery. Cheers !
User avatar
PaulAyrey
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1141
Joined: Tue Feb 04, 2014 5:24 pm
Location: Worthing, West Sussex, UK
Contact:

Re: Sd.Kfz.9 Famo - Revell 1:72

Post by PaulAyrey »

Nice one Eryk, looks first class!
Post Reply

Return to “Armour & Military Vehicles”