Global Scale Modeller

Here is my next project warning picture heavy as you get a lot of plastic for £16.



The sprune shots so excellent detail on this kit and a choice of 4 to build all with different noses.









3 of the 4 noses



Parts of the cockpit




The clear parts look really good and the bit on the right is the 4th nose


The decals look really good as well will have to wait and see how the work later


The instructions look really clear and easy to use




And the work done so far just the cockpit so far.


That's it for now folks

Scribed panel lines, Rivets, a good looking and detailed cockpit, nice wheels and lots of clear parts...

Sat ready...... munchin....... could do with a coke smilie to go with the popcorn though!

Good luck and well done on a nice looking kit for the cash Nige.....

Looks like a great kit.

Looking forward to seeing how this comes together.

Look forward to this

Just a few bits I've done.

Some if the dangley bits rocket tubes fuel tanks and missile frames.



A close up of the rocket tubes the detail is great



The nose with about 25g of weight it says 20g but added a little more to be on the safe side.




The cockpit and the undercarriage doors



The tail booms with the undercarriage bays in them.




So far I have been really impressed with this kit the fit as been great and the detail is superb

Quick update cockpit all painted a quick wash pastel and water and dry brushed to bring out some of the detail then wings and booms glued together again with very few problems.






More later hopefully.

Coming together really well.

Unusual build technique on this one.

The cockpit is looking great

You could say that guppy I'm test fitting every thing just to make sure on the build so I don't get it wrong.

Nige201980 wrote:You could say that guppy I'm test fitting every thing just to make sure on the build so I don't get it wrong.

Ahh I see. though it might be the instructions because of the unusual nature of this aircraft.

Bit of both I think mate there not the clearest so tryin to follow them but doing my own thing which ever is easiest

And the general construction finished she's looking good.



Just cleaning up the seam lines now.

Nice she's a fair size by the looks of it.

That she is mate.

Nice kit. I think if I'd bought it I would have been tempted to spend £64 to get the 4 variants I'm building the Academy 1/72 Hawker Hurricane mk2 and think it's a sweet little kit, well impressed with Academy.

The fit was really good no filler needed just sanding on the seam lines.
So on with the primer on a coat of humbrol silver No 11.




Sorry not great photos but its got dark all of a sudden think we're going to have a storm ill try and get better photos in the morning.

Great looking aircraft....

There's just something about the P-38 isn't there.

Yeah the p-38 is a very cool plane, nice work Nige

I think looking at this build i may have to do one of these.

Great job so far dude.

Well you would have thought I'd get more done this afternoon but been prepping this lot ready for paint which has took most of the afternoon and still got to mask the canopy after I've rested my eyes.



Well ill post more later if I can lol.

Yeah that part always take me ages to do.

Worth it in the end though make painting so much easier.

Yeah it will proberly be over the weekend now got half the the canopy mask and another 3 bits too do (it comes in 5 bits) so it's a long job.

Just a quick update and my 1st video.

[youtube]Uu3m4N-Tves[/youtube]

Thanks for looking.

Nice update dude and thanks for the how to on dipping

Will be using it on my next aircraft for sure.

T3hGuppy wrote:Nice update dude and thanks for the how to on dipping

Will be using it on my next aircraft for sure.

thanks mate a not a problem

So update time.

So I masked of the areas for the yellow then painted it the masked of again for the anti glare panels and painted again. Before I painted the black I put a bit of maskol down for the chipping and it didn't work to bad.





Had a slight problem this side as I was taking the tape of some if the paint came with it but I think it works to my advantage.


What do you think should I reprint or leave it.

The panels look a bit too new so rubbed them down to get a worn effect.





That's it for now guys it will be canopy on then a couple of coats of klear then on with the decals.

I really like the worn effect you've done on the anti glare adds to the piece nicely.

thanks mate what about where the tape peeled of the paint im in a mind to leave it

Nige201980 wrote:thanks mate what about where the tape peeled of the paint im in a mind to leave it

I think it could be left maybe add some other chips around it like it was hit by something?

thta swhat i was thinking ill have another look at in the morning if i put some burn marks round it it could be a deflected round maybe because the japs only hane machine guns an not cannons on the zeros i think and in there bombers that the aircraft would have been hunting.

Holy moly Nigel, I pop off for the afternoon to get some work done around the house and you've practically got her build. Wow.
Waste no time Dude.
She looks awesome. I agree with the others, that wear on the anti-glare is perfect. I'd keep that boo boo in the paint too. Bird strike or a hit from an errant round.
Amazing progress Buddy!

Cheers Coen

That's what I though to we shall see what I can do.

Right update time

I "bashed" up the anti glare panels and tonight was decal time but ill get on to that later.

On with the photos.








So this evening I started on the decals the way this build has gone i thought this would be a piece of cake how wrong i was. 1st few went on great then the trouble started with some splitting some just breaking up some not settling some taking ages to come of the backing paper so I did the best I could started at about 6 and only just finished so photos will be on in the morning as the light is not great at the mo.
sorry about the rant just needed to get it of my chest.

I feel your pain m8! I am having exactly the same issues this pm as well. Totally cheesed off to put it mildly. I mean printing decent decals, that's pretty basic stuff, surely?..........





Yes, yes its and don't call me Shirley!!!

I would mind so much if the kit was rubbish but is a good build for a good price if airfix can do it why not everyone.

I feel bad for you Nigel... and David (Shirley) too.
Going through the build and the initial painting only to have the decal disintegrate is a pisser.
Then you have to wait a week or two for replacements if you have to order them, so your build gets delayed.
RAAAARRRGHHH!!!!
But I digress.

Well this morning some have settled down a little better some havent.



The main ones on the nose and wings were fine thank god

the smaller stars both split on me but managed to line them up if there are any gaps ill hide it with weathering.

the wrap around ones on the boom were a problem not settling down and too big so had to play about with them.

The prop one were a problem they were too big so would not conform properly and 3 of them split.



nearly all the smaller ones just fell apart when in the water or when i tried to slide them of so apart from a few no step and the fuel ones it dose not have them which is a shame the decals are very very thin and i think that's the problem a little thicker and they would be tougher and better.

What do you have in your decal water nige, are you using a setting solution?

no only water mate i apply revell decal soft to the place where i want to apply it then on top aswell never had a problem before.

Sorry to hear about your decal disasters Nige....though to look now I think you have done an amazing job recovering and hiding the problems you had.. Well done mate..
The prop cones candy stripes look fantastic...
I also think the anti glare looks good along with the booboo bird strike on the nose.
Well done again mate..

Cheers wappy a least i can hide some if not all of it with chipping to her on the markings because it flew in a harsh environment thats one saving grace and hopefully the varnish will help to.

Looks like you recovered well from the decal issues you where having.

Coming together really well.

I'd have to agree, you've set her up nicely. It's too bad about those decals.
I have no doubt that you'll straighten all that up with weathering.
Looks great Nige.

Thanks guys might get the weathering done later.

Just some gentle weathering and chipping to hide the decal problems













So once dry another coat of klear then on with the wash and other bits and bobs

That looks like it went pretty well Nige.
Nice save!

Yeah fairly happy with it once the wash is on should dull it down nicely and blend it together just a shame I had to do it.

Pin wash applied


And rubbed off





Think ill leave it for a bit then reapply it.

I've never done a wash like that before. It always scares the crap outa me. Haha.
I'm not brave enough to try it... Yet.
You seem to have no trouble at all with it Nige. She looks pretty good. That second treatment will probably look good too.

its easy mate .yeah she needs it missed some places