Global Scale Modeller

Hi I will be building this Russian tank destroy the kit is not very well detailed and some of it is wrong so some scratch building req.



The SU-100 arrived in operational units in October 1944 and immediately became popular with Russian crews. It was able to defeat almost every German tank on the battlefield, only to be outmatched in 1945 by the King Tiger. Popular songs and movies reflect this popularity. It became instrumental in fending off German units during Operation Frühlingserwachen at Lake Balaton in Hungary, March 1945, and helped the great offensives in Eastern Prussia. Some were even found fighting in the streets of Berlin due to their awesome bunker-piercing capabilities, despite the fact they were never designed for infantry support. Like the SU-85, they lacked any secondary weapons and were conceived to fight in coordination with other covering units to deal with infantry and aircraft.

Made up the lower hull, I'v add some lead wheel wights


Cleaned and made up all the road wheel, the panel on the left has rivets they should be bolt so I'll replace them next and the panel on the right I'll remove and replace he grill._z.jpg[/img][/url]

Thanks for looking.

Removed all the rivets and replaced them.





They look big but they are only 1.2mm bolts ?

Cut out the plastic grill and add a nice brass mesh one





Thanks for looking

Just ordered one of these the kit one is crap.





Thanks

You must be a gluten for punishment replacing all those rivets, so my hat off to you for having the patience to do it
I'm sure this will end up another Pete masterpiece and look forward to seeing it come together.

I'm also loving all the Soviet tanks being built here at the moment, I think I'm going to have to build another one soon

OneSmallStep1966 wrote: Wed Feb 15, 2017 8:43 pm You must be a gluten for punishment replacing all those rivets, so my hat off to you for having the patience to do it
I'm sure this will end up another Pete masterpiece and look forward to seeing it come together.

I'm also loving all the Soviet tanks being built here at the moment, I think I'm going to have to build another one soon

Hi Norm thank you, there is one or two Russian tanks at the minute, even my last one was and that was a Sherman, we well wait and see about the masterpiece

Hi the kit is not very well detailed and some of it is wrong these are some of the thing I'm change or adding

Removed all the rivets on the rear panel and replaced them with bolts
Add missing hatch handle
Add 2x missing brackets
Add 2x missing fuel lines


Replace the engine deck plastic grill and add a brass mesh one


Add missing handles on hullside
Add missing weld seam on the side turret



Add missing retaining bolts for front spare track links


Replace lifting rings


Add missing hinge pins to hatch doors


Thank you for your time

Always love looking in on your threads Pete. Your attention to detail is astounding

My just going to sit in the corner and watch mate

Fridgy wrote: Thu Feb 16, 2017 10:18 am Always love looking in on your threads Pete. Your attention to detail is astounding

My just going to sit in the corner and watch mate

Hi Mick you certainly can hope you have a comfortable chair and more than one bucket of

Great work Pete, shame about the details but nice reference shots

AdamLuscombe wrote: Thu Feb 16, 2017 11:34 am Great work Pete, shame about the details but nice reference shots

Thanks Adam, l have built much worse than this one

Wow, you like a challenge Pete!

I'm getting more interested in the Rusky stuff from WW2 so

Hi got a bit more done today.

Replace the plastic lifting rings with cooper wire.


Made up the front spare track links and add the missing retaining bolts .



Fitted the spare track links and drivers hatch.



Fitted front & rear panels and all the hatches.


Used lead wire for the fuel lines and add missing hinge pins on hatch doors.





Made up the missing handles for the hull side and rear engine hatch fitted storage bin.



Drilled out exhausts pipes and fitted.
Fitted upper side engine grills.





Thanks for looking

Got a bit more done.

Made up all fuel drum and fitted.


Added a wed seems to the side.
Fitted all the handles and the auxiliaries .



The last job was to redo one of the fuel lines .
Before

After


Thanks for looking

You're turning what is (on the face of it) a rather mundaine kit into something rather special

OneSmallStep1966 wrote: Fri Feb 17, 2017 10:05 pm You're turning what is (on the face of it) a rather mundaine kit into something rather special

Hi Norm, spot on with your observation it's pretty basic so I hope I've improved it, so thank you.

Fished the build all bar the barrel which has not arrived yet

Started by removing 4 bolts


Made up 2x right angle channels out of PE.



Made 2x tee uprights.


Used 1mm dia lead wire and flattened to make support straps x4






Add a couple of catches


Made up a new tow cable


Thank you looking

The barrel came, drilled a 4 mm hole in the gun mantle and glued and then fitted to the hull, now ready for paint.






Thanks for looking.

As always Pete some fine scratch building going on there mate

I'm leaning towards having ago on a future build, where do you get hold of the nut/bolts and copper wire of the correct sizes?

Kevthemodeller wrote: Thu Feb 23, 2017 9:45 am As always Pete some fine scratch building going on there mate

I'm leaning towards having ago on a future build, where do you get hold of the nut/bolts and copper wire of the correct sizes?

Hi Kev, thank you very much, you shuold have a go,blimey if I can get away with it( only just mind you) I'm certain a man of your calibre can.

I use copper jewellery wire .4 /.6/.8/1.0 mm of eBay http://www.ebay.co.uk/itm/1x0-3-0-4-0-6 ... algo%3DPL. there lots of them.

The nut/bolts are 1/35 from Meng Model, there are 2 set, A Large & B Small I get them of eBay.

http://www.ebay.co.uk/sch/i.html?_from= ... +1%2F35+Sm

http://www.ebay.co.uk/sch/i.html?_from= ... 4&_sacat=0

Hope that helps

Pete, are those Meng nuts and bolts sets peel-off self adhesive or do you have to individually cut them out?

privatepete wrote: Thu Feb 23, 2017 3:05 pm Hope that helps

It does mate thank you

http://www.affinitymodels.co.uk/p133534 ... -4865-4865

get some of those.... give you more size options...

Happy modelling !

schweinhund227 wrote: Fri Feb 24, 2017 12:40 pm http://www.affinitymodels.co.uk/p133534 ... -4865-4865

get some of those.... give you more size options...

Happy modelling !

Thanks for the info it's the same as the one I posted ?

OneSmallStep1966 wrote: Fri Feb 24, 2017 8:34 am Pete, are those Meng nuts and bolts sets peel-off self adhesive or do you have to individually cut them out?

Hi Norm you have to individually cut them out and glue them sorry, no they cut quite easily, I think they look very effective.

privatepete wrote: Fri Feb 24, 2017 3:13 pm

OneSmallStep1966 wrote: Fri Feb 24, 2017 8:34 am Pete, are those Meng nuts and bolts sets peel-off self adhesive or do you have to individually cut them out?

Hi Norm you have to individually cut them out and glue them sorry, no they cut quite easily, I think they look very effective.

used them before.... but you have the LARGE set....
what I posted is the small set !

SET "A" SMALL CONTAINS PLASTIC NUTS & BOLTS WITH OUT WASHERS SIZES 0.8mm, 1.0mm & 1.4mm

schweinhund227 wrote: Fri Feb 24, 2017 3:46 pm

privatepete wrote: Fri Feb 24, 2017 3:13 pm

OneSmallStep1966 wrote: Fri Feb 24, 2017 8:34 am Pete, are those Meng nuts and bolts sets peel-off self adhesive or do you have to individually cut them out?

Hi Norm you have to individually cut them out and glue them sorry, no they cut quite easily, I think they look very effective.

used them before.... but you have the LARGE set....
what I posted is the small set !

SET "A" SMALL CONTAINS PLASTIC NUTS & BOLTS WITH OUT WASHERS SIZES 0.8mm, 1.0mm & 1.4mm

privatepete wrote: Thu Feb 23, 2017 3:05 pm
The nut/bolts are 1/35 from Meng Model, there are 2 set, A Large & B Small I get them of eBay.

http://www.ebay.co.uk/sch/i.html?_from= ... +1%2F35+Sm

http://www.ebay.co.uk/sch/i.html?_from= ... 4&_sacat=0



Yes I have the large set and put a link to the large and small sets as above, I wish I hadn't started this post I was only trying to help.

Thanks Pete. They do look effective but I'll give them a pass at the moment because I need to learn how to paint and weather properly first before attempting to hyper-detail anything I build.

OneSmallStep1966 wrote: Fri Feb 24, 2017 5:25 pm Thanks Pete. They do look effective but I'll give them a pass at the moment because I need to learn how to paint and weather properly first before attempting to hyper-detail anything I build.

Hi Norm it did stop me and there's nothing wrong with your paint/weather in my opinion

Beautiful work on the details Pete. Some manufacturers have got a nerve charging for their kits!

Building up into another meisterwerk me thinks

Hi got the primer and base coat on as always I apologise for the hand painting









Thanks for looking

How do you get a brush stroke free finish? Very thin paint + lots of coats?

OneSmallStep1966 wrote: Wed Mar 01, 2017 8:34 pm How do you get a brush stroke free finish? Very thin paint + lots of coats?

Hi Norm, I wish it was brush stroke free, I only use water to thin my paint,probably 20% and 2 coats, it's more luck than skill and it's all done with mirrors

What ate you apologising for Pete, your hand painting looks superb, can't see any brush strokes. If you hadn't mentioned it I would have thought it was airbrushed

Looking great

Fridgy wrote: Wed Mar 01, 2017 9:46 pm What ate you apologising for Pete, your hand painting looks superb, can't see any brush strokes. If you hadn't mentioned it I would have thought it was airbrushed

Looking great

Hi Mick I have little or no confidence in my painting ability,this is because I have to hand paint everything, I have severe Emphysema and I'm on oxygen 4-6 hours a day so a air brushing is big no no,I all so have other health issues and have to take a bucket full drugs some which give me the shakes.

privatepete wrote: Wed Mar 01, 2017 9:55 pm

Fridgy wrote: Wed Mar 01, 2017 9:46 pm What ate you apologising for Pete, your hand painting looks superb, can't see any brush strokes. If you hadn't mentioned it I would have thought it was airbrushed

Looking great

Hi Mick I have little or no confidence in my painting ability,this is because I have to hand paint everything, I have severe Emphysema and I'm on oxygen 4-6 hours a day so a air brushing is big no no,I all so have other health issues and have to take a bucket full drugs some which give me the shakes.

Sorry to hear that mate, painting wise you, from what I've seen, do an excellent job at it. If you dont have cofidence in it, I do

Fridgy wrote: Wed Mar 01, 2017 10:07 pm

privatepete wrote: Wed Mar 01, 2017 9:55 pm

Fridgy wrote: Wed Mar 01, 2017 9:46 pm What ate you apologising for Pete, your hand painting looks superb, can't see any brush strokes. If you hadn't mentioned it I would have thought it was airbrushed

Looking great

Hi Mick I have little or no confidence in my painting ability,this is because I have to hand paint everything, I have severe Emphysema and I'm on oxygen 4-6 hours a day so a air brushing is big no no,I all so have other health issues and have to take a bucket full drugs some which give me the shakes.

Sorry to hear that mate, painting wise you, from what I've seen, do an excellent job at it. If you dont have cofidence in it, I do

Hi got the detailed painting,decals and a wash on the wheels/ running gear.






Thanks for loooking

Managed to finish this one, as always I apologise for the hand painting skills
















Thank you for taking the time to view this build

I don't know why you keep apologising for painting by hand. Your finishes are superb and if anything, offer a more reilistic finish than something I'd knock out with an airbrush.

OneSmallStep1966 wrote: Thu Mar 09, 2017 8:16 pm I don't know why you keep apologising for painting by hand. Your finishes are superb and if anything, offer a more reilistic finish than something I'd knock out with an airbrush.

Seconded. Completely agree

spock1701 wrote: Thu Mar 09, 2017 8:23 pm

OneSmallStep1966 wrote: Thu Mar 09, 2017 8:16 pm I don't know why you keep apologising for painting by hand. Your finishes are superb and if anything, offer a more reilistic finish than something I'd knock out with an airbrush.

Seconded. Completely agree

Thank you guy's very nice of you but I just have little or no confidence in my painting ability never had or never will.

Looks great Pete like all your builds

What's next mate?

Kevthemodeller wrote: Fri Mar 10, 2017 8:20 am Looks great Pete like all your builds

What's next mate?

Hi Kev thanks,well did you see the Elegant just finished that to,should finish the King Tiger to day then a snow diorama then something a bit different a Autoblinda AB 40 Ferroviaria it goes on rail's

privatepete wrote: Fri Mar 10, 2017 9:37 amHi Kev thanks,well did you see the Elegant just finished that to,should finish the King Tiger to day then a snow diorama then something a bit different a Autoblinda AB 40 Ferroviaria it goes on rail's

I'm not going it even think about multi builds one enough don't know how you do it mate

The extras/modifications really set this model apart. Have always liked the look of the SU-100 and SU-85.

arkbuilder2012 wrote: Sat Mar 11, 2017 2:47 pm The extras/modifications really set this model apart. Have always liked the look of the SU-100 and SU-85.

Hi thank you very much, might get around to the SU-85 soon

Hey Pete, loving the build, half way through one of these little buggers myself so I feel your pain!! Only use the hairy stick myself too but I have issues with what shade of green to paint it.. Your colour looks great, what did you use.

Mikeyb wrote: Sun Jul 09, 2017 1:45 am Hey Pete, loving the build, half way through one of these little buggers myself so I feel your pain!! Only use the hairy stick myself too but I have issues with what shade of green to paint it.. Your colour looks great, what did you use.

Hi Mike I used "A MIG-019" from this set it ok to bush I think it took two coats,love to see some pic's when you finished it,and good luck with the rest of the build

privatepete wrote: Sun Jul 09, 2017 7:17 pm

Mikeyb wrote: Sun Jul 09, 2017 1:45 am Hey Pete, loving the build, half way through one of these little buggers myself so I feel your pain!! Only use the hairy stick myself too but I have issues with what shade of green to paint it.. Your colour looks great, what did you use.

Hi Mike I used "A MIG-019" from this set it ok to bush I think it took two coats,love to see some pic's when you finished it,and good luck with the rest of the build

Thanks Pete, will show as soon as its finished.

I actually think that your hand painted finish looks superior to that of an airbrush - has a more realistic look somehow, maybe the way it reflects light - very, very nice!