It's Friday nights live at the bench hat have you been working on for Friday June 23rd *

[Kingdan]

"

received_10155493607073530.jpeg

WHAT HAVE YOU BEEN WORKING ON THIS WEEK?" - A NEW SEGMENT OF FRIDAY NIGHT'S ISM LIVE "AT THE BENCH" SHOW!

* Open now until 1 hour before the show on Friday, June 23rd*

** PLEASE read ALL of the rules below carefully! **

Hello everyone! This post is being created to give you, as a member of ISM, the opportunity to share what you have been working on during the week on the Friday night show. Please read the rules below in order to participate.

01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.

02). Please, only post your own work and not that of others.

03). Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long.

04). Also, have only one project shown in the image per member each week. Again, this prevents prolific builders from dominating this segment and making this segment longer than it needs to be.

05). Along with your image, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).

06). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.

07). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

08). There will be a posted thread similar to this one on the ISM Forums. PLEASE post your work only in ONE of these. This will prevent us from having to sort through duplicate posts on both sites.

After the the live crew shows what they have been working on during the week, participating member's images and details will then be shown. This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[Twokidsnosleep]

Bumping this up forward to get some posts

[aur0ra145]

1/35 Tamiya US M4A3E8 Sherman "Easy Eight" - European Theater
Ultimate Black primer
Tamiya XF-62 Olive Drab

Aftermarket:
1/35 L186 ABER BARREL 76mm for M4A3E8 SHERMAN

Excellent kit. Really makes building it a joy. Next up will be getting the accessories painted and the initial chipping/weathering done.

Have an excellent weekend everyone!

[Twokidsnosleep]

Continuation of the Sea King 1/72 by Airfix
Airwaves PE set to detail up grills and such
Hull is together now shown here in Ultimate primer...now has a layer of Tamiya XF3 flat yellow
Lots to do before the June 30th deadline
build thread here:viewtopic.php?f=591&t=21908&start=120

all

[exmoor]

progerss on the suzuki telefonic primed with Ultimate grey primer top coat mrhobby x5 blue. Gloss coat zero one coat
would like to say a big thankyou for the guys on the forum for the help and advice

[TommyKillander]

Hey Guys!

Been working recovering the wingsection of my 1/48 Hasegawa J7W1 Shinden after a horrible accident where I tipped a bottle of Tamiya Extra Thin on the bench and the underside of the wing got soaked

I left the wing for a week for the glue to cure and after that I carefully sanded down the uneven surfaces and polished it with a Ultimate buffing stick. I managed to save the top side, but the underside had lost some details



I hope to start painting it this weekend, fingers crossed


Tommy

[Nev]

I have been finishing the cockpit for my 1/144 Bandai Slave 1.

I used Tamiya paints mixed with Mr Leveling thinner and Citadel metals for drybrushing, with an oil based wash for the weathering:

[Tomcat64]

1/72 Academy A10A & Revell T-72 for the Warring Weather GB. Not a lot of bench time this week but last week the A10 was Ultimate Black Primer and this week it's Vallejo Light Ghost Grey; now ready for masking for the Dark Ghost Grey camo pattern. The bashed up T-72 build is just about completed except for the tracks which will be added after initial painting; the tracks are link & length and I need to figure out how to bend the damaged set for the right hand side without losing too much detail.

[Joesdad]

Kinetic 1:48 Sea Harrier FRS.1, this is for the FAA SiG.
Painted in MRP-114 Extra Dark Sea Grey, I've also used the Eduard BigEd set, Master pitot tube and a Brengun boarding ladder.
A lovely kit which built up with out to much problem, some filler here and there but it was fine. The nozzles are a weak point as they don't really fit that well so be careful.

Build thread
viewtopic.php?f=591&t=21977#p273307

Final reveal
viewtopic.php?f=592&t=22638#p282298



TTFN

[Twokidsnosleep]

That is a fantastic Harrier build made even better when you read the story behind that aircraft...Superb modelling

[Joesdad]

That is a fantastic Harrier build made even better when you read the story behind that aircraft...Superb modelling

Thank you Scott much appreciated mate. It is a good story all right

[Kingdan]

Some excellent work again this week chaps well done keep it up.(oo errr)



Dan

[DarrenCo]

1:24 Airfix Typhoon

Work and holidays has been getting the way of progress, but time to get back to it, still quite a it to do , but getting somewhere now. Time to get this finished off.

Used Ultimate Primer, Vallejo, Tamiya, Mr Hobby ( Humbrol acyrilc, first and last time i'm doing that! )paints. Aqua gloss and Mat