Page 1 of 1

#44 Lancaster late for take off

Posted: Sat May 05, 2018 7:48 pm
by RossiM1
Sorry for the late start, but have been busy with a few other things but today was a free day so no excuses, chocks away.
This is the Revell 1/72 Lancaster MKI/III a late war machine I will be doing the MKIII one of the Lancs that performed one of the last operations odf the war.
The kit is showing it's age there is plenty of spare plastic , that is supplied in the form of flash, it's on pretty well every part, it's more like a resin kit.
I have had this kit for quiet a while just sitting in the stash, and I had purchased the Eduard self adhesive cockpit detail set, and the seat harness's, some Master gun barrels, and a set of resin wheels.
With the flash sorted made a start by prepping the fuselage and the cockpit ready to receive the etch sets, primed with Ultimate black primer, then airbrushed with Tamiya XF69 NATO Black to give a greyish black appearance,etch parts added then details painted as per call outs in RAF interior Green, & flat Brown.
fairly productive day and hopefully can crack on with a bit more tomorrow.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Cheers
Image

Re: #44 Lancaster late for take off

Posted: Sat May 05, 2018 7:56 pm
by Garion77
Late but pretty nice start !! Good work already !

Re: #44 Lancaster late for take off

Posted: Sat May 05, 2018 11:48 pm
by Twokidsnosleep
Well I expected most guys would wait to start out on the weekend so I don’t think you are late at all
Wonderful to see a Lancaster project....such and important plane historically
I welcome you to,the sig and hope you have good luck with the kit and a bit of fun along the way
:cheers2:
Scott

Re: #44 Lancaster late for take off

Posted: Sun May 06, 2018 1:48 am
by digger303
I like the pe :th: :th:

Re: #44 Lancaster late for take off

Posted: Sun May 06, 2018 3:35 am
by aur0ra145
Great looking PE, I love how it brings the interior to life!

Re: #44 Lancaster late for take off

Posted: Sun May 06, 2018 7:07 pm
by RossiM1
Thank you for the comments guys, the build rumbles on primered and painted the engines and the nacelles and the upper turret, used Tamiya cockpit green for these parts, got the wings assembled, and the rear stabilisers, and got the fuselage buttoned up, progress is quiet quick at this stage, next up will be getting the nacelles mounted to the wings, and start on the undercarriage.Image
Image
Image
Image
Here are todays photos
Thanks again guys and good luck to everyone in the group
Image

Re: #44 Lancaster late for take off

Posted: Sun May 06, 2018 10:37 pm
by Twokidsnosleep
Jeepers, you are all ready to button ups the fuselage!!!
I have only fondled my kit parts once or twice this weekend with no intent to build

Re: #44 Lancaster late for take off

Posted: Sun May 06, 2018 11:47 pm
by RossiM1
Lol Scott this is just one of those kits that despite a lot of the criticism that Revell get builds really well, only a slight swipe of filler along the wing roots required everything else has gone together beautifully. Still a way to go and plenty of time to screw it up but so far so good

Image

Re: #44 Lancaster late for take off

Posted: Fri May 11, 2018 11:15 am
by gaz45
Nice choice and good progress there mate

Re: #44 Lancaster late for take off

Posted: Sun May 13, 2018 8:56 pm
by pourquoi61
Fast builder, I like it. :th: :th: :th:

Re: #44 Lancaster late for take off

Posted: Mon May 14, 2018 5:11 pm
by Twokidsnosleep
Keep up the good work
I can't even get my cockpit done yet :tongue:

Door prize draw coming up this weekend :banana:

Re: #44 Lancaster late for take off

Posted: Thu May 24, 2018 7:34 pm
by RossiM1
Back to the Lancaster, progress fairly swift as the assembly process is pretty straight forward, as you can see in the photos I have removed the kits machine gun barrels and drilled out with a .5mm drill ready to install the brass barrels from Master, they really do make a big difference, the fuselage is buttoned up and the seams taken care of the canopy and the gun turret glazing has been added and masked using Vallejo masking fluid then I have primed with Ultimate Black primer. Next step will be to spray with Tamiya XF69 Nato Black then a very thinned Tamiya XF1 Matt Black to try and get some tonal variation on the Black. Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Thanks for looking

Re: #44 Lancaster late for take off

Posted: Fri May 25, 2018 11:07 am
by gaz45
Looking good mate

Re: #44 Lancaster late for take off

Posted: Sat May 26, 2018 1:33 am
by Twokidsnosleep
OOooo Drooling over those gun barrels, those look COOL!!!
She is coming along very nicely mate

Re: #44 Lancaster late for take off

Posted: Sat May 26, 2018 7:42 am
by alextheblue
Looking really nice. That NATO black should add a nice touch to the black. :th: :th:

Re: #44 Lancaster late for take off

Posted: Sat May 26, 2018 12:21 pm
by RossiM1
Thanks guys enjoying this so far pretty straight forward build no dramas have acquired some of the Airfix RAF vehicle sets so maybe an attempt at a diorama will be in order.

Re: #44 Lancaster late for take off

Posted: Wed May 30, 2018 10:29 pm
by pourquoi61
Yes those gun barrels are magic.
Magic building and nice watching this Lanc come to life.

Re: #44 Lancaster late for take off

Posted: Thu May 31, 2018 7:18 pm
by RossiM1
The Lanc rumbles on primed and painted the matt black masked and started on the Dark Earth using Mr Hobby for this noticed some seams that suddenly reared their heads so have had to go over with sprue goo need to sand this back and reapply the Dark earth again.
Image
Image
Image

Re: #44 Lancaster late for take off

Posted: Thu May 31, 2018 7:33 pm
by Twokidsnosleep
Really taking shape now :thumb2:
She looks to be taking up a fair bit of your desk there
I still have machine gun envy :mrgreen: what colour do the Brownings get painted ??? black? gun metal? green?
My Airfix gives no colour call outs :oops:

Re: #44 Lancaster late for take off

Posted: Thu May 31, 2018 7:44 pm
by Stokesy44
Loving seeing the Lanc come to life.

I’m losing track of how many of them are in the Sig. We may not have a whole squadron but we’re close to having a flight of the beauties.

Re: #44 Lancaster late for take off

Posted: Fri Jun 01, 2018 7:29 pm
by RossiM1
Twokidsnosleep wrote: Thu May 31, 2018 7:33 pm Really taking shape now :thumb2:
She looks to be taking up a fair bit of your desk there
I still have machine gun envy :mrgreen: what colour do the Brownings get painted ??? black? gun metal? green?
My Airfix gives no colour call outs :oops:
Thanks Scott yes the bench is a little cluttered temporary accomadation while new extension going up
the guns will be painted H28 gunze gun metal

Re: #44 Lancaster late for take off

Posted: Fri Jun 01, 2018 10:28 pm
by Twokidsnosleep
RossiM1 wrote: Fri Jun 01, 2018 7:29 pm
Twokidsnosleep wrote: Thu May 31, 2018 7:33 pm Really taking shape now :thumb2:
She looks to be taking up a fair bit of your desk there
I still have machine gun envy :mrgreen: what colour do the Brownings get painted ??? black? gun metal? green?
My Airfix gives no colour call outs :oops:
Thanks Scott yes the bench is a little cluttered temporary accomadation while new extension going up
the guns will be painted H28 gunze gun metal
Righto, thanks for that colour call out :D

Re: #44 Lancaster late for take off

Posted: Sat Jun 02, 2018 9:46 pm
by pourquoi61
Gun metal?
Painting stage is like a baby bird getting it's feathers. :th: :th: :th:

Re: #44 Lancaster late for take off

Posted: Sat Jun 02, 2018 11:26 pm
by demarcation
Great build so far mate!! Keep up the good work :th: :th:

Re: #44 Lancaster late for take off

Posted: Wed Aug 01, 2018 7:14 pm
by Twokidsnosleep
One month left in the sig :thumb2:
viewtopic.php?f=660&t=25285