Global Scale Modeller

Hi guys
Welcome to entry number 4 (yes this will be the last one,4 is enough participation for me )
This time it will be Revell's B-2 Spirit aka the Stealth bomber in 1/144
The Modelcollect kit looked cool but that is a bit big and costs quite a lot more then this one
Allthough the budget wasn't my main reason of getting this kit
The reason i wanted this one is that years ago when i was about 7 or 8 and started modelling this was the first kit i bought
I actually let my dad build it for me as i didn't know what i was doing and i thought i could chop off a finger with the hobby knife (a well estimated guess as i was a bit clumpsy at times )

So this will be my trip down memory lane
And this is the kit

20180606_001140 by Mark Verploeg - Flickr2BBcode LITE
The box art


20180606_001222 by Mark Verploeg - Flickr2BBcode LITE
The kit content


20180606_001258 by Mark Verploeg - Flickr2BBcode LITE
Main fuselage bits


20180606_001318 by Mark Verploeg - Flickr2BBcode LITE
Wingy bits .....if you can call them wings the whole thing is a flying wing


20180606_001324 by Mark Verploeg - Flickr2BBcode LITE
Landing gear bits


20180606_001329 by Mark Verploeg - Flickr2BBcode LITE
Clear part


20180606_001337 by Mark Verploeg - Flickr2BBcode LITE
And the decals

So not a very complicated kit but then again it is a older kit (1991 or 93) and it is in a small scale
But never the less it should be a fun build
So i expect to have some progres on it very soon

Take care and i will see you next time
Cheers
Mark

You sir are an bomber animal...I mean that in a good way
I applaud your efforts

Twokidsnosleep wrote: Wed Jun 06, 2018 12:23 am You sir are an bomber animal...I mean that in a good way
I applaud your efforts

Thank you Scott
But like i mentionned in the first post
This is a fairly easy build
The Nighthawk will require a bit more work then this one
The hardest part here is to get the seam on the wings out

Another one Mark and you work full time too. Now I’m impressed.

Les

Les0012 wrote: Wed Jun 06, 2018 6:40 pm Another one Mark and you work full time too. Now I’m impressed.

Les

Yes i do work full time
But i had a lot of over time (i think it is called) so now i should have 1 or 2 days each week where i work only a couple of hours
So that gives a bit more modelling time
And i try to do a little bit of modelling each day

Hi guys
Time for a build update
Unlike what i have heared about this kit i had some good fun putting it together
It is a bit simple , it has a low parts count and not that much detail going on but it is a skill level 3 kit by Revell's standard so basicly it is also for the modellers who haven't build that many kits yet
That doesn't mean more experienced modellers can't have fun with it though


20180606_002513 by Mark Verploeg - Flickr2BBcode LITE
Work starts with the interior
Wich isn't much but these parts need to be painted before i can put it together


20180611_012210 by Mark Verploeg - Flickr2BBcode LITE
Once the tub was painted the decal was added


20180611_012222 by Mark Verploeg - Flickr2BBcode LITE
I added a bit of color to the seats
But in the end it won't be very visible


20180611_012238 by Mark Verploeg - Flickr2BBcode LITE
The other parts


20180611_013320 by Mark Verploeg - Flickr2BBcode LITE
I couldn't get the glass to fit at first
So i trimmed some pieces of the part to make it fit


20180611_014214 by Mark Verploeg - Flickr2BBcode LITE
Then the tub was glued in place
And some weight was added
It is a roll of tape filled with nails to get some weight
I glued it down with some ca glue and added a piece of tape to hold it in place while the glue is setting


20180611_014959 by Mark Verploeg - Flickr2BBcode LITE
Then the nose wheel was glued in place


20180611_015840 by Mark Verploeg - Flickr2BBcode LITE
And the lower fuselage part was fitted


20180611_020249 by Mark Verploeg - Flickr2BBcode LITE
Then the engine covers where glued in place


20180611_020423 by Mark Verploeg - Flickr2BBcode LITE
Followed by the wings


20180611_022919 by Mark Verploeg - Flickr2BBcode LITE
Then the work shifts back to the bottom


20180611_023545 by Mark Verploeg - Flickr2BBcode LITE
Then the main landing hear was added


20180611_024347 by Mark Verploeg - Flickr2BBcode LITE
The some filling of all the seams


20180611_024354 by Mark Verploeg - Flickr2BBcode LITE
And on the bottom


20180611_025058 by Mark Verploeg - Flickr2BBcode LITE
Preparring the wheels


20180611_025114 by Mark Verploeg - Flickr2BBcode LITE
Almost done


20180611_025505 by Mark Verploeg - Flickr2BBcode LITE
All done and ready for painting

And that is all i have for now
Thanks for having a look
Take care
Cheers
Mark

jez another nearly done

It was going a bit fast indeed
But this isn't a very challenging kit if you are used to 300+parts and using tons of pe on a build
Not that i do all the time but this one is pretty easy to build

Blimey Mark you really are churning out your own fleet aren't you!

Awesome build quality as always and looking forward to seeing what you do with the black paintwork again.

Thanks Neil
I haven't fully decided on the steps of the paintwork yet
But i think i will do a bit of pre shading using a grey primer base that i mixed with One shot primers (black and white in ewuall parts) then some lighter grey on the centres of the panels and black on the edges
So it should turn a very dark grey instead of a actuall black but to be honest and all black plane is a new one for me

Hi guys
So time for a short update on the painting stages


20180612_011203 by Mark Verploeg - Flickr2BBcode LITE
I started out with a home made mix of one shot primer


20180615_011804 by Mark Verploeg - Flickr2BBcode LITE
Then some shading


20180615_024912 by Mark Verploeg - Flickr2BBcode LITE
And to finish it a highly thinned coat of black
Well several layers actually but i wanted the pre shading to show through


20180620_002539 by Mark Verploeg - Flickr2BBcode LITE
Then i added some dark iron to the exhaust area
I will be adding some smoke (Tamiya) later on to make it look less shiny and more used


20180620_002545 by Mark Verploeg - Flickr2BBcode LITE
And the lower half was painted
Not much to do here but still it is something

After this i gloss coated it with Aqua gloss and tomorrow i will be adding the decals and seal those in to prepare it for a little bit of a wash later on
Thanks for stopping by and having a look
Take care
Mark

That thing is otherworldly looking enough without giving it a prehistoric Raptor crew
At least they have longer arms than a t-Rex so should be able to fly her

Yeah i kind of forgot they where on there aswell
They are for a different build though

Love the subtle tones of the shading. Beautiful work Mark!

Thank you very much Alex

It's going great so far! So strange to see it next to the larger scale Nighthawk!

Looking good mate

Kevthemodeller wrote: Wed Jun 20, 2018 12:44 pm Looking good mate

Thank you very much Kev

ElCapitan wrote: Wed Jun 20, 2018 9:34 am It's going great so far! So strange to see it next to the larger scale Nighthawk!

Thank you very much Rob
You are right it does look weird
But to be honest the Nighthawk is way bigger then i thought it would be
It easily sizes up with a MiG-29 while i was thinking it would be more like a MiG-21 or maybe just a bit smaller then a F-16

Love the way you've managed to get subtle tonal variations on the black Mark - really impressive work on this and the F-117 as well

Tomcat64 wrote: Thu Jun 21, 2018 9:16 am Love the way you've managed to get subtle tonal variations on the black Mark - really impressive work on this and the F-117 as well

Thank you very much Neil

Hi guys
Time for a final update on this build
As some may have seen i finished this build along with the F-117 last week
But after painting there isn't that much to do on a plane like this
So here it goes

20180622_104814 by Mark Verploeg - Flickr2BBcode LITE
Once it was gloss coated i added the decals
Some sadly have some silvering even though i used quite a lot of micro sol
Most go on the top with only 1 star and bars decal for the lower half of the plane


20180627_113620 by Mark Verploeg - Flickr2BBcode LITE
I used a neutral (grey) wash but the effect is kind of lost on the black
It does show a little in the wheel wells
After the wash the wheels where added aswell


20180627_113627 by Mark Verploeg - Flickr2BBcode LITE
And the liquid mask was removed from the clear parts

And that is about all i have for this one
I will be posting some proper reveal pics in the reveal section to really finish this build and build thread
Thanks for stopping by
Take care
Mark

No need to thanks us for for looking..... sheer pleasure to see it all come together

Thank you very much Digger

Another good one mate

Thank you