Dragon 1/35 Panther Ausf. G with zimmerit
Posted: Sat Aug 11, 2018 9:09 am
Hi guys
Just wanted to show one of my current builds
It is for a group build on a facebook page but i see no harm in showing it here aswell as it has been a very enjoyable build so far
It is this kit

20180804_093734 by Mark Verploeg - Flickr2BBcode LITE
Dragon's Panther G with the molded on zimmerit
My plan is to make a small diorama or vignette with it using the tank and some figures
It should be depicting a scene of a vehicle from the 15th SS Hohenstauffen division in Normandy
To add to the tank i will be these figures

20180805_023932 by Mark Verploeg - Flickr2BBcode LITE
This should set a pretty obvious scene where the crew spots a JaBo or fighter bomber
But i just realised i need a 5th figure as Panthers did have a 5 man crew not a 4 man crew but i think i have something left in the stash or in my big box of used figures
Anyway let's start with a look at the kit

20180804_093907 by Mark Verploeg - Flickr2BBcode LITE
All this was jammed in that box

20180804_094204 by Mark Verploeg - Flickr2BBcode LITE
Hull and stowage boxes

20180804_094222 by Mark Verploeg - Flickr2BBcode LITE
Other zimmerit parts

20180804_094241 by Mark Verploeg - Flickr2BBcode LITE

20180804_094250 by Mark Verploeg - Flickr2BBcode LITE

20180804_094303 by Mark Verploeg - Flickr2BBcode LITE

20180804_094308 by Mark Verploeg - Flickr2BBcode LITE

20180804_094317 by Mark Verploeg - Flickr2BBcode LITE

20180804_094330 by Mark Verploeg - Flickr2BBcode LITE

20180804_094338 by Mark Verploeg - Flickr2BBcode LITE

20180804_094347 by Mark Verploeg - Flickr2BBcode LITE
It seems to be a first batch kit as it still has the metal hooks for spare tracks ,some cardboard protection for the tracks and more obvious a Dragon card
Stuff that they don't do any more
It seems to be like most of the current Dragon Panther G's as i recognize quite a lot of the sprues from older builds that where either Panther G's or had a Panther G hull
But i will also be adding a metal barrel wich i bought i guess ....can't remeber it though

20180804_094357 by Mark Verploeg - Flickr2BBcode LITE
So let's start building

20180804_105833 by Mark Verploeg - Flickr2BBcode LITE

20180804_105836 by Mark Verploeg - Flickr2BBcode LITE
First up the suspension arms
It actually starts with the wheels but i skipped those for now

20180804_110931 by Mark Verploeg - Flickr2BBcode LITE
Cooling units

20180804_112704 by Mark Verploeg - Flickr2BBcode LITE
The rear plate with the damaged stowage boxes that where on the Dragon card

20180804_115903 by Mark Verploeg - Flickr2BBcode LITE
Work on the front of the upper hull

20180804_143243 by Mark Verploeg - Flickr2BBcode LITE
The instructions didn't call for it yet but i glued the upper and lower hull parts together when i could
I find it easier to handle this way and if i need to clamp it there are no small and fragile parts on the hull yet
Wich i would (ofcourse) break

20180804_150801 by Mark Verploeg - Flickr2BBcode LITE
Finishing up the engine deck

20180804_160314 by Mark Verploeg - Flickr2BBcode LITE
All the stuff on the hull sides

20180804_162859 by Mark Verploeg - Flickr2BBcode LITE
I then moved to the gun
Aber claims this gunbarrel is for both Tamiya and Dragon
Well i had to use the rear portion of the kit barrel to make it fit and i had to sand the inside of the mantlet ring a bit to get it to fit
Looks better then a styrene barrel though

20180804_195846 by Mark Verploeg - Flickr2BBcode LITE
The turret shell was glued together
Again i did this before all the fragile stuff is added just in case i need to clamp it

20180804_223031 by Mark Verploeg - Flickr2BBcode LITE
Then the small bits are added

20180805_020724 by Mark Verploeg - Flickr2BBcode LITE
Hey it starts to look like a tank

20180805_024032 by Mark Verploeg - Flickr2BBcode LITE
I then started working on the figures

20180805_024228 by Mark Verploeg - Flickr2BBcode LITE
Looks okay but the guy in the foreground looks a bit out of place and i was told he looks a bit off

20180805_123844 by Mark Verploeg - Flickr2BBcode LITE
So i removed the arm that gave him a weird look and replaced it with one from the spares box

20180805_134647 by Mark Verploeg - Flickr2BBcode LITE
And i tilted his head a bit so he looks up

20180805_141827 by Mark Verploeg - Flickr2BBcode LITE
This looks better
I also sorted out some small bits and pieces like spend shells ,some personal gear and a jerry can

20180806_150908 by Mark Verploeg - Flickr2BBcode LITE
Then the wheels where done

20180806_151252 by Mark Verploeg - Flickr2BBcode LITE
And the tracks

20180806_161537 by Mark Verploeg - Flickr2BBcode LITE
Almost ready for painting
I still need to get the wheels on some cocktail sticks but other then that i can start priming this build
So i need to have a look for a 5th figure now as that would make more sense to me
Other then that i can start painting it and i need to look for some tree branches
As this will be a Normandy based vehicle it can have branches hanging on the sides of the tank to give it a bit of camouflage from all those pesky planes
But once i have that last figure i will be starting the painting proces as i have this tank and the T-10M that i am building for the Cold War GB so i can't wait all that long
But i wasn't planning on waiting in the first place
So i will be back with a update fairly soon
Thanks for stopping by and having a look
Take care
Cheers
Mark
Just wanted to show one of my current builds
It is for a group build on a facebook page but i see no harm in showing it here aswell as it has been a very enjoyable build so far
It is this kit

20180804_093734 by Mark Verploeg - Flickr2BBcode LITE
Dragon's Panther G with the molded on zimmerit
My plan is to make a small diorama or vignette with it using the tank and some figures
It should be depicting a scene of a vehicle from the 15th SS Hohenstauffen division in Normandy
To add to the tank i will be these figures

20180805_023932 by Mark Verploeg - Flickr2BBcode LITE
This should set a pretty obvious scene where the crew spots a JaBo or fighter bomber
But i just realised i need a 5th figure as Panthers did have a 5 man crew not a 4 man crew but i think i have something left in the stash or in my big box of used figures
Anyway let's start with a look at the kit

20180804_093907 by Mark Verploeg - Flickr2BBcode LITE
All this was jammed in that box

20180804_094204 by Mark Verploeg - Flickr2BBcode LITE
Hull and stowage boxes

20180804_094222 by Mark Verploeg - Flickr2BBcode LITE
Other zimmerit parts

20180804_094241 by Mark Verploeg - Flickr2BBcode LITE

20180804_094250 by Mark Verploeg - Flickr2BBcode LITE

20180804_094303 by Mark Verploeg - Flickr2BBcode LITE

20180804_094308 by Mark Verploeg - Flickr2BBcode LITE

20180804_094317 by Mark Verploeg - Flickr2BBcode LITE

20180804_094330 by Mark Verploeg - Flickr2BBcode LITE

20180804_094338 by Mark Verploeg - Flickr2BBcode LITE

20180804_094347 by Mark Verploeg - Flickr2BBcode LITE
It seems to be a first batch kit as it still has the metal hooks for spare tracks ,some cardboard protection for the tracks and more obvious a Dragon card
Stuff that they don't do any more
It seems to be like most of the current Dragon Panther G's as i recognize quite a lot of the sprues from older builds that where either Panther G's or had a Panther G hull
But i will also be adding a metal barrel wich i bought i guess ....can't remeber it though

20180804_094357 by Mark Verploeg - Flickr2BBcode LITE
So let's start building

20180804_105833 by Mark Verploeg - Flickr2BBcode LITE

20180804_105836 by Mark Verploeg - Flickr2BBcode LITE
First up the suspension arms
It actually starts with the wheels but i skipped those for now

20180804_110931 by Mark Verploeg - Flickr2BBcode LITE
Cooling units

20180804_112704 by Mark Verploeg - Flickr2BBcode LITE
The rear plate with the damaged stowage boxes that where on the Dragon card

20180804_115903 by Mark Verploeg - Flickr2BBcode LITE
Work on the front of the upper hull

20180804_143243 by Mark Verploeg - Flickr2BBcode LITE
The instructions didn't call for it yet but i glued the upper and lower hull parts together when i could
I find it easier to handle this way and if i need to clamp it there are no small and fragile parts on the hull yet
Wich i would (ofcourse) break

20180804_150801 by Mark Verploeg - Flickr2BBcode LITE
Finishing up the engine deck

20180804_160314 by Mark Verploeg - Flickr2BBcode LITE
All the stuff on the hull sides

20180804_162859 by Mark Verploeg - Flickr2BBcode LITE
I then moved to the gun
Aber claims this gunbarrel is for both Tamiya and Dragon
Well i had to use the rear portion of the kit barrel to make it fit and i had to sand the inside of the mantlet ring a bit to get it to fit
Looks better then a styrene barrel though

20180804_195846 by Mark Verploeg - Flickr2BBcode LITE
The turret shell was glued together
Again i did this before all the fragile stuff is added just in case i need to clamp it

20180804_223031 by Mark Verploeg - Flickr2BBcode LITE
Then the small bits are added

20180805_020724 by Mark Verploeg - Flickr2BBcode LITE
Hey it starts to look like a tank

20180805_024032 by Mark Verploeg - Flickr2BBcode LITE
I then started working on the figures

20180805_024228 by Mark Verploeg - Flickr2BBcode LITE
Looks okay but the guy in the foreground looks a bit out of place and i was told he looks a bit off

20180805_123844 by Mark Verploeg - Flickr2BBcode LITE
So i removed the arm that gave him a weird look and replaced it with one from the spares box

20180805_134647 by Mark Verploeg - Flickr2BBcode LITE
And i tilted his head a bit so he looks up

20180805_141827 by Mark Verploeg - Flickr2BBcode LITE
This looks better
I also sorted out some small bits and pieces like spend shells ,some personal gear and a jerry can

20180806_150908 by Mark Verploeg - Flickr2BBcode LITE
Then the wheels where done

20180806_151252 by Mark Verploeg - Flickr2BBcode LITE
And the tracks

20180806_161537 by Mark Verploeg - Flickr2BBcode LITE
Almost ready for painting
I still need to get the wheels on some cocktail sticks but other then that i can start priming this build
So i need to have a look for a 5th figure now as that would make more sense to me
Other then that i can start painting it and i need to look for some tree branches
As this will be a Normandy based vehicle it can have branches hanging on the sides of the tank to give it a bit of camouflage from all those pesky planes
But once i have that last figure i will be starting the painting proces as i have this tank and the T-10M that i am building for the Cold War GB so i can't wait all that long
But i wasn't planning on waiting in the first place
So i will be back with a update fairly soon
Thanks for stopping by and having a look
Take care
Cheers
Mark











































