Ism Friday's night live at the bench what have you been working on for *October 5th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, October 5th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[js1714]

Greetings Slaves to the Plastic and fellow Fumblers...This week saw the completion of the MENG 1:35 ACHZARIT (Cruel Female). I added on the IDF DROID and a new front left machine gun,,,(Legend Products). I also replaced the plastic tracks with metal one's from Friul. As you can hopefully see this version of the model comes complete with a fully fitted crew and Infantry section compartment. Primed in Ultimate Grey and Vallejo Hemp. Hope you like it. Many thanks and Model on. Or.....

[Lynx]

This week I've finished the Revell 1:72 Red Arrow Hawk. It was built for my 6 year old daughter who wanted a Red Arrow to be built and demanded it must be Red! It was hand painted with Revell paint and finished vallejo gloss varnish.

[Paul]

Tamiya 1/24 Escort RS Cosworth, added the front lamp pod which is held on by a Magnet to enable removable as shown in the pictures.

*Primed in Ultimate Modelling Products White Primer
*Base colour Zero Paints "Bradi" Yellow
*Decaled in Studio 27 Bradi decal scheme
*Cleared in Prorange 2k Clearcoat
*All sprayed though the Ultimate Apex Airbrush
*Wheels are Speedlines from the Tamiya Repsol escort kit
*Wet sanded with Micromesh 8000 and 12000 grade
*Polished with Novus polish and given a Tamiya Wax

[Tomcat64]

This is Tamiya's rebox of the 1/35 Italeri M-24 Chaffee kit with a couple of added extras such as a metal barrel, new parts for the M2 machine gun and a couple of sprues of baggage from their allied vehicle accessory set. I started on this kit a couple of months ago as a mojo-builder after the masochism of the Valom bomber and it turned into a bit of a test mule and became my first experiment using oils for some of the weathering effects. It's an ok kit but definitely felt more Italeri than Tamiya in terms of fit & quality with plenty of tidying up and ejector marks to deal with along the way.

The basic colour was Vallejo ModelAir Olive Drab, lightened with white for fading. The stowage has been brush painted with various mixes of khakis, greens & browns from Vallejo modelcolour. The oils used were a selection from Abteilung 502 along with pigments from MIG. Final coat was a light airbrushing of AK UltraMatte.

[CaptainBigelow]

I just finished the classic 1/35 Tamiya Willys MB kit. I added the Black Dog resin pack to provide some extra detail. Painted with Tamiya paints and Model Color for hand-painting the resin stowage items.

[F27pax]

Tonight’s offering, ladies and gentlemen, is the ancient Airfix Boeing 737-200 dresses up in Oldmodels decals to represent one of New Zealand’s National Airways Corporation 737s in the early 1970s. It has a Tamiya rattle-can white primer base, Tamiya rattle can Pure White and TS-83 as its main colours with a formulation of Boeing Grey made for me by my local automotive paint shop and various shades of Xtreme Metal on the engine nacels. No pre-shading, no sealing, no chipping, no washes and none of that other post-production stuff. Simple fun, really!

[Timplastic]

Watch out the hermans are coming !!!!
Eduard 1/48 focker D.VII from the dawn patrol boxing
All the wing decals are now on thank god. They went down well but that was quite a job. All the red paint is on and started applying some fading. Next up is some masking and smoke for the darkened areas of wing

[NormanD]

Takom 1/16 Renault FT-17

Not a huge amount done this week, just more fiddling and clean up with the FT-17, still it's not back in it's box, which is a promising sign.

PS I do not endorse any form of advertising on my pictures and simply won't allow it.

[warpedcrisis]

Hobby boss 1:35th St chamond medium tank
Finished up the build and getting ready for paint.Building for the ww1 gb .
Full build log in the ww1 gb section of the forum.
Hope everyone has a good weedend Andrew

[TommyKillander]

Hey Guys!

Working on with my AMT 1/25 1971 Dodge Charger R/T for Pauls Muscle Car Build.

Started on the interior and painted the seats with Ultimate Gloss Black and Ultimate Black Primers. Really pleased with the result




Tommy

[Novorus]

This week Mathew I have mainly been playing with my 1.72 Airfix LCVP landing craft.

Working on the weathering to make it look abandoned for a further diorama. Have a great weekend all.

[onemac]

1/32 Tamiya F-16CJ Fighting Falcon.

Leading edge slats are on upside-down/downside up/wrong Dyslexia and old age are my excuses

05_10_2018 by Alan MacNeish, on Flickr

[MakingModels]

Little late but..

Tamiyas 3.7Cm Antitank Pak 35/36 in 1/35th..

Scene is depicting late winter early spring.. the snow is starting to melt and everything is getting Muddy...

Hope you like it

Karl..

[Black73Cat]

Takom V2 and Hanomag Tractor... 1/72 scale.

Other than waiting for a matt coat to dry on the rocket...this is pretty much done.

I will be sitting it on a diorama but need to pick up a few bits, to get the features that I have in mind. There may be a few tweaks to the Weathering once it's sat on scenery, just to tie it in. The rocket will stay clean, as they wouldn't be around for long enough to get messed up much. I may just add a very light layer of dust.

Really enjoyed this build. Other than a bit of fettling to get the tractor body onto the chassis, it's been very straightforward.

Primed with Ultimate Black Primer and base coated with Tamiya XF-63 German Grey. The grey was then lightened with some lighter greys and blues, to add some paint fading and highlights to the body.
Weathering done with assorted MiG and AK products along with Abteilung 502 oils.

May have overweathered it in some folks' eyes but I got the look that I wanted.