Global Scale Modeller

Hi guys!
One project nearly finished, time to start another.
This time the Revell Tornado F.3 ADV
I'm going to build this one out of the box with closed canopy.
Details on the parts are reasonable but they need a lot of cleaning.
So I think this would make an interesting build.
Here's the box art, and a pic of sprue mountain.

One of my fave aircraft! Looking forward to seeing how it comes together. What markings will you be doing?

ElCapitan wrote: Wed Oct 17, 2018 8:43 pm One of my fave aircraft! Looking forward to seeing how it comes together. What markings will you be doing?

It's a great kit by the looks of it
Not sure about the markings jet, I was thinking maybe the boxart

I'm just coming to the end of building this kit, its not without it's challenges.

MrBowcat wrote: Thu Oct 18, 2018 11:50 am I'm just coming to the end of building this kit, its not without it's challenges.

I like a challenge...lol

First progress.
I started by adding the nose weight .
I used a iron ball that we have laying around at work, and these are around 40 grams what most instructions are asking for, so lucky me...



Instead of gluing it in and wait for ever to dry, I glue in a piece of sprue to hold the ball in place.
This way I can remove it when necessary.



Then the construction of the cockpit followed.



Not going to display it with open canopy, so I'm not going to spent a lot of time detailing the cockpit.
The decals gives enough details



The seats are looking great, great on details. Need to paint them up though.



So far a good start, I will keep the updates coming!
Cheers, Frans

More progress..

Wings glued together and at the inside of them there's a complicated construction that allows the fuel tanks to stay straight when the wings are folded back. Great engineering but imo the more complex the model, more fragile it will be .



The two cockpit halves together, always leaves a seam line. Now in stead of Sanding that line and paint that part black, I used adhesive cloth that is used for saddles of scale motor bikes. Seam line gone, and it does look fancy ...lol







Wings added..





I started the engines and the top of the fuselage as we speak, but boy o boy... talking about fit issues there...
I will have to to some re shaping and filling, I will get back soon!

Frans

This is one I have recently got. Will be interested in how you find its going together, hear lots of various comments as to quality of parts/fitting. Two builds to go then will be on the bench with it

archivist wrote: Mon Oct 22, 2018 8:57 pm This is one I have recently got. Will be interested in how you find its going together, hear lots of various comments as to quality of parts/fitting. Two builds to go then will be on the bench with it

It isn't a bad kit, but it definitely has some challenges...
Inside the wings there's some kind of lever construction witch can be very fiddly.
The top of the fuselage looks like it's 4mm too long, but maybe I did something wrong, solved it by cutting a small strip off the back
Bit of filler was required as well..
If you are going to build it, test fit the parts before going glue crazy and you'll be fine.
Like I said, not a bad kit, but it needs attention

Looks great so far. The HobbyBoss version that I built only allows you to build it with the wings unswept, so much simpler in that aspect.

ElCapitan wrote: Mon Oct 22, 2018 11:32 pm Looks great so far. The HobbyBoss version that I built only allows you to build it with the wings unswept, so much simpler in that aspect.

Thank you.
This model does have the workable wings, but half way through the instructions you still have to choose for wings in or out.
But by cutting a piece of hull a bit further I managed to keep the wings working!
Thinking out of the book....lol

Boy oh boy oh boy...
This kit is testing my skills...
The fit of the upper hull that was 4mm too long wasn't the hard part and with some cutting and filling it was ok.
But the Air intakes.... my god.... the Air intakes are a nightmare
Nothing fits correctly, and I had to cut away stuff and make the sides thinner. Even had to reshape some parts!
And off course, filler.... by the gallon.





But if you know me, I don't give up that easily!
Sanding....a lot of it, but I'm happy with the result.
Even if it means I lost some details, but it could be a lot worse!



And here's how far I'm now...






Lets hope the rest of the build will be smooth sailing from here..
But I'm scared of building the landing gear now....lol

Stay tuned!

Wings are finished now.
Front slats up and rear are down.
Got to say, complex build but worth the effort.





With the slats down, it's impossible to fold the wings back, so after all my effort to keep the wings foldable I glued them in this steady position..





Looking good so far,





See you next update !

I was thinking...
Should I add the reverse trust buckets or not..
Are they used only by landing? Hmmm.
For what I understand they can only be used when the plane is on all his wheels, so I think the could be used when the plane was parked . And I think its cool looking and hide the Seam line at the inside of the engines, so yeah! Let's do it.





Kits version.



I will paint them first, and glue them last.

Dry fit the landing gear as well.
Unclear instrucktions, good to have lots of reference pictures at hand.



And last but not least,
Masked the canopy.
I will go for I closed canopy, but not sure jet.



Cheers, Frans

Cockpit as good as finished.
If I would build this kit again, I would go for after market seatbelts.
These moulded on things are crap..
But I'm going to close the canopy, so it's ok by me as it is now.







And I closed the canopy as I said I would do.
But I forgot to add the tiny rear view mirrors....lol
No not forgot, didn't like them and the are so tiny that they will be hardly visable.
So I decided to let them off.



I think she will get her black Ultimate primer tomorrow

Small update:
Primed the Tornado in grey.



And pre-shadedit with black



Then the base colour ofa mediumsea grey was applied.









Lots more paint work need to be done, but the basics are there!

More progress....
I painted the Tornado in a base from medium grey and highlighted some areas with light gull grey.









Added the landing gear, and made a start at the decals.

Trust reverse buckets added....

Looking good.

The walkway line marker decals on the top were fun huh?

That looks amazing. The flaps detail is far better than the HobbyBoss kit!

MrBowcat wrote: Tue Oct 30, 2018 10:49 am Looking good.

The walkway line marker decals on the top were fun huh?

Thank you
Those lines were not easy!
I thought it were "cut here" lines... lol

ElCapitan wrote: Tue Oct 30, 2018 11:47 am That looks amazing. The flaps detail is far better than the HobbyBoss kit!

Thank you!
I was amazed myself, for a rather cheap Revell kit there's a fair amount of details!

I am wondering how you have the table so clean.
I have a total messy in my table.

JoaquinGM wrote: Tue Oct 30, 2018 9:33 pm I am wondering how you have the table so clean.
I have a total messy in my table.

Ha! That'sbecause I'm working really organized and I have a lot of workspace, that helps too...

weathering progress.
Added a wash and a pin wash with AK panel liner.
Pops up the details, but also the details that aren't there....lol











Still got to do the underside.

Stunning work as always Frans!

Great to see you back on the forum.

Looks so good, congrats.

alextheblue wrote: Mon Nov 05, 2018 4:33 pm Stunning work as always Frans!

Great to see you back on the forum.

Thank you and It's great to be back!
The integration of Flickr is a major improvement and so much easier to upload pics.
I might even join a GB again!
For old times sake. I missed being on the forum.

JoaquinGM wrote: Mon Nov 05, 2018 6:24 pm Looks so good, congrats.

Thank you very much