Ism Friday's night live at the bench what have you been working on for *October 26th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, October 26th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[js1714]

Greetings Slaves to the plastic,,,this week then, we see further progress on the Trumpeter 1:35 Karl Gerät..The lower hull and tracks assembly is almost complete,,The upper hull and Mortar assembly will begin this week culminating in weathering and touch up's...not for you Dan . Have a great show,,see you all on the night..Model on Slave's ,,,or else,,!!

[Twokidsnosleep]

Working Friday for me gents, so have fun tonight whilst I slave away
Small update on my Wingnut Wings 1/32 SE5A for the WWI GB...making two planes from the kit
Ultimate gelb primer on the left plane and Windsor Newton oils on the right airframe and all the wood



to all for a good weekend

[Tomcat64]

Progress on the Resicast Ford T Vickers Gun Carrier is moving at the speed of a lame racing snail but still plodding along.

After finishing the build the vehicle was washed down and then given a coat of Ultimate Black primer followed by Vallejo Model Air Dark Olive Drab and a misting of US Olive Drab. The front grille's had a black clay wash, and the decking has a wooden base colour applied.

The driver has been painted in various shades of ModelColour Greens & Khakis and obviously left it parked up in a rough part of town as some bugger's nicked the wheels.

[aur0ra145]

Howdy all!

Finally back to making models. Here is my 1/48 Academy Mig-21MF. Primed in Alclad Gloss Black. Shiny bits are in Alclad Aircraft Aluminum . Still a ways to go; but, it's been fun so far.

Hope everyone has a great week!

[Rallychef]

New Project DAF XF with Custom box trailer 1/24. Trade Copiers Ltd Penrith.
As I am waiting parts to finish the Jenkinson Scania, I thought I would plan the next build. I acquired the tractor blueprints and rescaled them on the computer to 1/24, this allows me to use it as a template when fettling the donor kit, cutting plastic for custom building or deciding on what resin is required for the project. Artwork has been provided from the vehicle wrapping company so I can get custom decals ordered, truck brochure acquired for reference and loads of photo's taken. Big shopping list for Telford, KFS have a trade stand there, lots of resin already on order from A & N resin in Latvia.



Regards Ian D

[Timplastic]

Work on the Eduard 1/48 dh.2 is under way
Many words have been muttered about the great idea by my self to my self, yes I can confirm, I’m nuts
My dear friend photoetch and I are in an understanding, that we don’t always get along but when we do it’s bliss

[F27pax]

I admit it, I’ve been binge watching ‘The Blacklist’ and haven’t got much modelling done. However, I imagine that most modellers are like me and have a few kits on the go at one time in various stages of completion. So, here are the six kits that I’m currently working on. Starting from the top right and working clockwise: A 1/72 Fujimi Aichi D3A2 almost ready for decalling. A Kora 1/72 Curtiss SNC-1 that only needs some yellow on the wings and will be in Peruvian markings. Next the Welsh Models 1/144 Fokker F-27 that is giving me all kinds of grief in getting the grey to go down right. Then the Amodels 1/72 Dassault Falcon 100 which is almost ready for buttoning up. Next the 1/144 F-Rsin resin Potez 62 that I’ve just started cleaning the parts on before assembly. On the top left hand corner is my nemesis, a 1/144 VLE Models vacform and white metal Sikorsky S.38 kit. I’ve been working on it for four or five years and every time I feel like throwing it in the bin I put it back in its box and wait six months. At this rate it should be ready to show by 2024.

[MakingModels]

Trumpeter USS Lexington 1:700th

Construction is almost complete, just the planes to finish then we are on to paint..

Thanks

[Paul]

Tamiya 1/24 Castrol Honda NSX

Manflu is hindering progress but its getting there slowly, all the engine and running gear painted and glued in place.

Going to flat and polish the body work tonight and make a start on the interior

[heyMika]

I've finished working on Monogram GSX '70 1/24. Primer Tamiya Fine Surface Primer Pink and main colour is Tamiya TS-39 Mica Red + TS-13 clear. Little bare metal foil here and there. White Tamiya X-2 inside. + Fujimi's trolley jack 1/24 for future maintenance in that car.

[NormanD]

Hobbyboss 1/35 SS-23 Spider

It's still not back in it's box, which is a good thing, will be doing more fiddling on this during tonights live show

I still refuse to endorse any ISM or Ultimate Modelling Products advertising in any of my pictures.

[Kingdan]

Not much from me this week just started to add the Matt black bits and bobs to the 1/24 revell cobra, all the Matt black is Ultimate primer with Windsor and Newton uv Matt varnish

[Black73Cat]

More work on the diorama for my 1/24 Italeri Transit.

Original scatter base, covered with a loose mix of household filler, which was painted grey with some cheap acrylics. Then sealed with AquaGloss before liberal application of assorted Ultimate washes.
Some spider webs added to the van, using UHU glue!

Enjoying this now and on should be finished in plenty of time for Telford.

[Novorus]

Evening one and all, mainly this week I have been laying around in bed but did manage to do some base prep. Not to exciting this week sorry Dan ......

[Maverick231]

I've been working on my 1/72 Condor Mikoyan-Gurevich MiG-25U Foxbat for the IPMS Cold War SIG display at Telford.

She's taken me to hell and back but a hell of an Aircraft and well worth it even at this stage.

[Andreas]

Hello guys. I have had a bussy week this week and my progress has been weak.
This picture illustrates the extent of the progression that has been done on the 1:48 supermarine spitfire Mk. VIi
It’s gray!

[JoaquinGM]

Millenium Fallcon couch



Not finished.

[effikovec]

Oh hi there first post on forum. Yeeey!
Well i finished my 1/72nd typhoon by Airfix it was a sweet build it fitted so well i didnt believed it was Airfix at all.
i decided not to use any decals for insasion stripes, greenish stripe on tail and yellow lines on the wing, all masked and airbrushed.
Paints are mix of Tamiya and MR hobby
Black was done using umton oil woth zippo fuild as thinner then sealed with Tamiya Xf-86 and bit of weathering.
Hope you like! Nice live lads.

[Tat2bhoy]

Finished the Revell 1/48 Roland CII
Used MRP primer with mr hobby paints for the camouflage scheme and Tamiya for the markings which I made my own masks. First attempt at the rigging, very fiddly and time consuming but well worth the effort.
Have still got to put up the final build photos in the WWI GB thread and then get started on a base for it