Global Scale Modeller

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, November 2nd**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

Revell 1/24 shelby cobra

Primed with ultimate modelling products gloss black primer
Base painted with 3 coats of badger minitair chrome silver then badger minitair ghost tint plasma fluid
All the back bits and bobs are ultimate modelling products black primer
Gloss coated with mr hobby gx100
And polished with tamiya polishing compounds
Finished with Tamyia wax

Tamiya 3.7cm AntiTank Pak 35/36 in 1:35th

Primed in Ultimate Black Primer
Painted with Tamiya and AK paints
Diorama made with Picture frame, Pollyfilla and AK interactive Wet mud effects and Winter Diorama stuff
All Airbrushing was done with Ultimate Apex

Hope you like it..

1:24 Revell 1966 Shelby Mustang GT 350 H.

Nearly finished on this build and I'm pleased with the result so far. Some parts of the build have been a challenge.
Body was painted with Mr Color GX 2 and cleared in Zero Paints 2K Diamond Clear Coat - still needs sanding and polishing.
Interior is mostly Tamiya Lacquer Paint LP-5 semi gloss black, with some Molotow liquid chrome, and black flocking for the carpet.
All primed in Ultimate black primer.
Tyres are a spare set from another kit (1/25 AMT Chevrolet Camaro Z/28), and I think they look much better than the box tyres.
Looking forward to finishing this one and moving on to the next build.

Have a great show everyone and thanks for all the kind feedback on the ISM Facebook Group.

I finally finished the Impala. The kit is an AMT 1967 Chevrolet Impala SS. I primed the kit with Ultimate Gray primer with a bit of sanding and buffing before applying the color. The color coat is Zero Paint's Red Pearl. I cleared the body with ZP 2K Diamond. All chrome parts were stripped with either Bleach or Sodium Hydroxide. Once stripped they were primed with Ultimate Gloss Black and then painted with Alclad Black Chrome. Trim parts were then cleared with Alclad AquaGloss. The aftermarket wheels are from Pegasus and I used two different sizes (same scale). The front end was dropped by relocating the attachment points of the wheels. The interior is mostly Ultimate Black primer (standard and gloss) with a few accents in the body color.

Tamiya 1/24 Castrol Mugen Honda NSX completed, bit of a challenge this one but got there in the end.

* Primed in Ultimate Modelling Products White primer
* Painted with Tamiya TS-26 white, then TS-35 Green, then TS-14 Black, all decanted and sprayed through the Ultimate Apex airbrush
* Kit decals were a nightmare but eventually went down ok
* Clear coated in Prorange 2k
* Paintwork flatted with 6000, 8000 & 12000 Micro mesh, then polished up with Novus and Tamiya compounds and given a Tamiya Wax

Good evening all. Tonight's offering is the Kora 1/72 Curtiss Wright SNC-1. This is a short run kit with most of the faults of those kinds of kits and is a real bugger to get together with lots of trimming and and testing and filling and sanding. It's decked out in the colours of the 28th Escuadron de Instruccion of the Peruvian Air Force based at Las Palmas around 1946. The base is Tamiya white primer with Tamiya XF-8 blue enamel and MRP Marking Yellow lacquer as the main colours. Most of the paint used in finishing the model are lined up behind it.

Hello all its Southport Steve here is what ive been up to this week, just a little bit more work on my Tamiya 1/32 Spitfire MK IX. here is where im upto with the cockpit, basically waitting on the seatbelts to be finished then I can start buttoning everything together ready for paint.
DSCN3944[1] by Steven Shepherd, on Flickr

Finished the Revell 359 Peterbilt
Primer used
body stynylrez metal primer. Then zero's purple pearl. Aqua glossed wet sanded and polished . Finished off with a good waxing.
Chassis Ultimate grey primer. Main colour was Ultimate gloss black primer. Metal areas wwas a mixture of alclad 2 chrome and black chrome.
Rear mud guards painted with tamiya rubber black. Ligths where a mixture of tamiya clar orange and a red sharpie

Really enjoyed doing this one and will be getting some more trucks in the future.
Hope you all have a good weeked Andrew

Managed to get this finished just in time for a model show last weekend. It's Eduards Bf109 G4 with added resin prop, wheels, canons, exhaust and control stick, turned metal barrels and pitot tube plus a couple of extra PE parts for the landing gear. I painted it in MR Paints RLM 74, 75, 76 colors and painted on some German markings. The markings where then covered in a home mixed Italian color and mottled, this was then chipped to reveal some of the German markings underneath.

Hey guys!
Working on Academys 1/350 warspite! With pontus detail set. Working on the delicate photo etch gangways, anchor chains and bits of weathering useing oils, Ak Naval sets, little touch ups with Mr hobby acyrilics and tamiya for the touch ups. Started the project early in the year, with a good 8months out, finally got to dust her down, and scratch the itch to complete the model.

KIT : Hobbyboss 1/35 SS-23 Spider

Work still continues on this beast, with 90% of the photo-etch cut, cleaned and folded into the correct shape. Ballistic missile and it's holding bay ready for primer, then painting, once all the photo-etch has been attached, then the main body can also go to the spray booth. crack on!!

PS : I still refuse to endorse any ISM or Ultimate advertising on my pictures.

Getting closer to finishing the diorama for my Italeri Transit.
Hedge and fence are complete. Tall grass and weeds in place but need some trimming and weathering.

Some bits to tweak and add but should be finished in time for Telford!

a small amount done on the wings. I have been trying to get the wing spar that is made of plastic threw the etch but its being rather precarious. Between either fitting perfect or bending the etch. im considering using metal bare instead

Amk 1:48 L-29
Sitting here tonight laying down some NMF