Ism Friday's night live at the bench what have you been working on for *November 23rd*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, November 23rd**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[GPalileo]

Hello all,

Been working on this Revell Leopard 2A6/A6M. I used styrene and a few 3d printed parts to add things like additional armor, stowage, other bits. Originally wanted this to be a Leo 2A7v, but I've since added parts from the PSO, A7+, and A7DK. Any naming suggestions?

Cheers

- Gino

[aur0ra145]

Howdy all,

Finally finished a model. First one in over 6 months! This is an Academy MiG-21PF Fishbed-D. Basecoated in Ultimate Gloss Black Primer. Painted in Alclad Aircraft Aluminum. Other stuff was painted in the Tamiya acrylic range. Quite the fun little kit.

Hope everyone had a good Thanksgiving and will have a good weekend!

Reveal thread: viewtopic.php?f=45&t=25976

[ElCapitan]

Zvezda 1/35 Panzerjager 1 is almost there - just a bit more dirt to do now that the friul tracks are on. Will be using this in a diorama so there will be a few figures and other bits and pieces added later as part of that.

[Tomcat64]

Work has continued on the WW1 GB Resicast Ford-T Vickers Gun Carrier this week. Everything's been dirtied up with Mig Pigments and given a coat of AK Ultra Matte. The Vickers gun and two figures have been painted up and dry-fitted to make sure it all still goes together ok.

Hoping to get some time to work on the base and four other figures this weekend.

[Maverick231]

Preshading done on the 1/72 Zvezda MiG-1.44 Flatpack using Valley Model Air Black.
My first experience preshading using an airbrush so let's see how it works out...

[Novorus]

So Mathew work continues on 1.48 Tamiya Spitfire for Tim's #Brit48 build. Premiered in black Ultimate and base coated with Mr Hobby 364 Aircraft Gray green.
Pilot replaced with a figure from PJ Productions Ref 481102 and painted with a mixture of model color. Instrument panel dry brushed and then a drop of Aqua Clear Gloss. Hope you enjoy.

[F27pax]

Don’t mind the cat in the background, he’s only four months old and I’m lucky he’s not trying to eat the models rather than just wandering past.

This is the Anigrand 1/144 model of the Nakajima G5N2 (Liz). When you buy these Anigrand kits you also get three smaller ‘bonus kits’ and I thought I’d make them all together this time so, from the right, the Aichi E16A (Paul), the Kawasaki Ki-78 (Ken) and Yokosuka R2Y. Yesterday my bottle of Ultimate black primer arrived from BNA so I thought I’d try it on these models. I’m pretty impresses.

No progress report next time, I’m spend next week in the fleshpots of Sydney.

[Paul]

Beemax Audi Quattro S1 completed, great kit out the box, even better with the added detail up set. The kit went together with no issues at all highly recommended

* Beemax 1/24 Audi Quattro S1
* Beemax detail up set
* Primed in Ultimate Modelling White Primer
* Base painted in Zero Audi white
* Kit decals went on perfectly
* Prorange 2k clear
* Polished with Novus polish

Iconic Grp B car everyone should build

[onemac]

Hello folks

This week I have mainly been catching up on stuff but managed to find a few micro seconds to stick together the Tamiya 1/32 Spitfire Mk.IXc (9c Dan). OK it's just the stand but it's a start

Glue used - Tamiya Extra Thin as demonstrated in the Ultimate Glue Bottle Holder

23_11_18 by Alan MacNeish, on Flickr

I'm defo going to win tonight with this complex yet stunning build

Al

[JonMW]

Been working on a SBS Model 1/48 Caudron C.600 Aiglon for the past week. It's one of the best resin kits I have seen, most parts can be press fit together with no glue. As there isn't much reference material available I've picked colors that looks kind of close to the one color photo I've found of the cockpit and added details as I wanted. The control sticks are scratch build from 0.5-0.9 mm brass tubing and the seat belts where made from Tamiya tape and some PE buckles. It's been painted in Vallejo Model Air PRU blue and Model Color Green Sky and then chipped a lot, the seats are a number of different browns. It was then given a dark brown oil wash and finally added pigments from dried Ultimate Earth to the floor and bottom half of the walls.

[Styreneworx]

Hello Paul & the Live Crew
haven't finished anything worth showing model-wise, but did get a small selection of displaybases done for future models. Getting spraypaint to cover outside at this time of the year is a pain in the a**.
I also received my Ultimate-goodie bag for my Panther diorama i won a while ago, and would like to use this opportunity to thank everyone who voted for it. It made me very proud
Also converted over to the Forum so Dan wouldn't butcher my name again
Have a nice Weekend everyone!

[Timplastic]

This week I have been going cross eyed rigging up the wingnut wings 1/32 salmson.
120 odd eyelets made
120 turn buckles cut
52 lines half rigged
Already for the next big push

[Black73Cat]

More work on the Hobby Boss King Tiger

Zimmerit applied to turret...sub assemblies made up.

Loving this!

[Kingdan]

Well I'm going too call him done for now he needs a plinth and maybe some decent pictures but he's done it's not my best work and I may change a couple of things later but for now he's done
Paint was mostly badger minitaire and Ultimate black and white primer
And the gloss and Matt coat were Aqua gloss and Windsor and Newton uv Matt varnish

[MakingModels]

.
Italeri Military German Motorcycle and Sidecar in 1:9th Scale

Engine is assembled and test fitting the frame..



Thanks

Karl

[TheSmoo]

probably too late with this but scratch built this tardis with working lighting from the 2005 series totally scratch built from balsa wood