Page 1 of 1

Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Wed Dec 26, 2018 1:35 pm
by Kingdan
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, December 28th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.
Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 10:55 am
by F27pax
Here’s the models made from the Anigrand 1/144 Nakajima G5N2 kit which offers three ‘bonus’ kits along with the main one. From the top we have the Aichi E16A, the Kawasaki Ki-78, the big one is the G5N and the bottom one is the Yokosuka R2Y. All were primed in Ultimate Black Primer (no problems with product placement here), the Imperial Japanese Navy models were painted using the AK Interactive Japanese Navy paint set and the Ki-78 was painted with AK Xtreme Metal Aluminum. The R2Y is incomplete because one of the cats ate its propeller.

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 3:40 pm
by Twokidsnosleep
Da plane, da plane!!!
Working on da Wing Nut Wing SE5a plane
Upper Wing test fitted and now dangerously close to having to rig :shock: :? :roll:
Might just get her done before New Years

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 4:17 pm
by Tomcat64
I've been masking & spraying my Zvezda SU-27 for Paul's "Plane? What plane? I never said anything about a plane" build. :)

Colours used were all Vallejo Model Air and included "Flanker Light Blue", "Flanker Light Grey" and "Flanker Blue". I've got some tidying up to do with two specific areas where I didn't detack the tape enough. The nose cone has been permanently attached and the tail fins just dry-fitted. I reckon I've probably got a week's worth of work left to get it finished so it's going to overrun a bit but it's been a really nice kit to put together.
Image

Happy New Year folks! :cheers2:

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 4:29 pm
by aur0ra145
Finished up my Tamiya 1/35 Panther ausf. D! Primed in Ultimate Black, painted in XF-60 Dark Yellow as a base; then, camo colors are the XF-61 Dark Green, and XF-64 Red Brown. Used the Vallejo Environment line for weathering with some Vallejo Pigments.

Fun build, really easy to put together. Highly Recommended!

Have a wonderful weekend and new year everyone!

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 5:51 pm
by onemac
Evening folks,

Hasegawa 1/72 F-15E Strike Eagle for the "Graeme Pearson for Honorary Santa" Build 2018.

Got the resin cans together and painted. Meanwhile most of my time has been spent removing flash, gluing the body/wings and conformal tanks together (they don't conform) and all whilst taking part in the recent festivities - that slowed me down a bit :cheers2:

Onwards and sideways as they say - but I will finish in time......... possibly!

Image28_12_2018 by Alan MacNeish, on Flickr

Thanks for looking.

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 6:15 pm
by Maverick231
This week I've restarted 3 of the Harrier's I have on the go at the moment.
Left to Right:
1/72 Fujimi Harrier GR.1 XV741 "Racer Harrier" - 1/72 Airfix New Tool Harrier GR.7 ZD408 "Armistice Harrier" - Airfix Old Tool Harrier GR.7 ZD464 "Wet Harrier":
Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 6:24 pm
by NormanD
Trumpeter 1/35 Mil Mi-24-E Hind

In conjunction with the Academy 1/48 CH-46 (NO it's not a chinook) I've been working on this beast, I've had this kit a while, it was the last gift from a very close friend who passed away, I've not had the heart to do anything to it for some time, but now is that time, last few weeks has been spent adding scratch built detail to the cabin area (it is lacking in there) I'm also going to open up a few panels along the way, just to add a little extra to the model, tonight will be the weapons pylons and build the engines ready for detailing, chopper on.

I still refuse to endorse any Ultimate advertising within my pictures

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 6:40 pm
by Paul
* Hasegawa 1/24 Lancia 037
* Primed in Ultimate Modelling Products White primer
* Base Sprayed in Zero Paints Bianco white
* Kit Cartograf decals were great
* Clearcoated in Pro Range 2k clear
* Wheels Primed in Ultimate black primer and painted in Mr hobby super fine silver
* All sprayed through the Ultimate Apex airbrush
* Added my own PE and Fabric seatbelts and an Hobby design antenna
* Flatted with 8000 and 12000 micro mesh
* Polished With Novus Polish

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 6:59 pm
by Black73Cat
Pin wash, primary chipping and decals on the Hobby Boss King Tiger 1/35

Still a fair way to go but rattling along and loving it.

Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 7:04 pm
by Kingdan
Had a small hellboy bust for Christmas so decided to start him to pick my mojo up and really enjoying it so far
Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 7:28 pm
by MakingModels
Dragon Smart Kit

Pz.Bef.Wg.III Ausf.J w/Shurzen in 1/35th

Wheels and lower hull complete.

Image

Thanks Dan ;)

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 7:33 pm
by Timplastic
Very glad to be able to get some of the parts stuck together on the Wingnut Wings 1/32 Brandenburg Image

Re: Ism Friday's night live at the bench what have you been working on for *December 28th*

Posted: Fri Dec 28, 2018 9:25 pm
by Paintingupfoster
Imagejust a single character from warhammer 40'00 as busy with an army paint at the minute. this is a 28mm space wolf character Ulric the Slayer, all hand painted with artis opus brushes and citadel paints. Not quite a shiny car but came out okay. Its Alan Foster btw.