Ism Friday's night live at the bench what have you been working on for *March 15th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, March 15th ish**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.

[Kingdan]

Dragon 1/9 scale iron patriot all built a few seams to smooth out then ready for some Ultimate primer

[Claire]

Finished up on the Moebius (1/160 - 1/144) Orion III Space Clipper from 2001: A Space Odyssey last week for a friend and did final photography.

Fit was okay but not great, required a bit of filling. Primed in Ultimate Primer, base coated in Mr Hobby Mr Color GX1. Decals were tricky and silvered a bit, sealed with Windsor & Newton Satin UV Varnish. Overall I'm happy and my friend is delighted.

[sheppy]

Hi all Southport steve this week I have been working on my Tamiya 1/24 Ford GT. primed in Ultimate grey then painted with Splash paint miami blue.
DSCN3965 by Steven Shepherd, on Flickr

[kiwigav]

Hi team
Iv'e been busy working on my 1/24 Tamiya Toyota GT-One Le Mans Car. Never built a lemans style car before, but I think I'm hooked.

Body Primed with Badger Stynlerez Grey/White
Red is Decanted Tamiya TS 49 & TS 26 , thinned with MLT and sprayed thru Ultimate Apex

Decalling almost complete onto the 2k clear next

Have a great weekend all

[Timplastic]

Work on the wingnut 1/32 brandenburg slowly keeps moving forward. Trying to get tone thing done every night, well trying. The floats where sprayed a blue/black to start and then it was pointed out thees were covered in a tar so that was then changed with some black/brown highlighting. add worn black paint by showing the wood threw were the crew moved around on the floats. a black/brown oil wash filter has been applied and the clad aqua gloss to seal that before the next stage of weathering on them, salt

[Paul]

Tamiya 1/12 Repsol Honda Rc211v '03, great kit of an iconic "Rossi" bike. I've included some naked pics of the bike at the end too.
All out the box bar the Fork set and Carbon decals

* Primed in Ultimate Modelling White primer
* Painted in decanted Tamiya TS-64 & 56
* Wheels a mix of TS56 and Ts31
* Kit Cartograf Decals
* Pro Range 2k Clearcoat
* Tamiya Fork update set
* Scale Motorsport Carbon decal film
* Metallics a mixture of Ak extreme, Alclad and Mr Hobby Super Metallics
* All sprayed through the Ultimate Apex Airbrush
* Black Tamiya Panel line wash
* Micromesh 12000 and Novus Polishes

[Johno]

1/32 airfix ww1 b-type 'ole bill' bus. Been a long tough road with this kit, definitely gave my limited skills and patience a run for their money but finally got it ready for weathering. Primed in Ultimate black, base coated in vallejo english uniform and cleared with alclad aqua gloss. Thanks for looking, happy friday!

[F27pax]

Good evening gentlefolks.
Here is a FSC Dujin 1/72 model of a Castel Mouboussin (sorry Dan) C25s glider. This is a deceptively simple fully resin kit but, like many of Jean Pierre Dujin’s creations, a challenge to get just right. The cockpit is more or less scratch built and enclosed in a crash molded canopy which is a serious challenge. The white is Tamiya rattle can Pure White and the red if Tamiya rattle can Brilliant Red, sprayed over a Tamiya white primer base. The detailed markings on the wings is not my doing but the result of an excellent decal sheet.

[Spook]

Just a little something to freak everybody out I know its not my work but I spoke to Paul and he said it would be ok.
I cant tell you a lot about these as its something the wife is into [it may be her last] as she's moving more into crafting . The hair is individually rooted, and painted in genesis heat set paints. that's about all I can say on it as I don't have a clue the wife's the expert. There's a lot to be said about opening the oven and finding a head staring back at you. Its no wonder I have nightmares.

043.JPG

[Gary30]

Many congratulations @Spook, taking credit for somebody else's work is out of order though

We could all use a bit more good news in our lives at the moment I'm sure! Well done to you all and I hope everyone is healthy and happy, enjoy it

[Tomcat64]

Congratulations Spook!

I've been slowly pottering away at this over the past few weeks...
Short Version: It's a tank Dan
Longer Version: It's Tamiya's 1/35 Tiger 1 ausf E Late. Being a Tamiya tank the build mainly consisted of me sitting at a desk watching it fall together, although I have added Tamiya's zimmerit stickers to feel like I was contributing. Primed in Ultimate black and then painted with Vallejo model air colours - all ready for dirtying up now.

[warpedcrisis]

Project rat rod.
Started of as a 1:25th monogram 41 willys street rod added into a lot of plasicard / styrene products.
Primed in Ultimate grey primer then painted with ammo by mig rust paint set.
Currently is now attached. Squadren white putty to deal with the gap.
Next up some more weld seams and finish up the painting and onto weathering.

Hope you all have a good weekend Andrew

[Newbinob]

53865561_841283949604890_5825447371164614656_n.jpg

This Is The MPC 1/72 Space 1999 Eagle 1, Painted in Ultimate White Primer & due to Decal's going brittle used Ultimate Black Primer then finished off with Vallejo Silver.

[onemac]

1/32 Tamiya F-16CJ......... saga.....

Whilst waiting for bits to dry on the 1/32 Tamiya Spitfire Mk.IXc I started the oil weathering on the 16 using Abteilung 502 oils. One day later and I've had enough

22_03_19_F-16 by Alan MacNeish, on Flickr

[ElCapitan]

Just to prove I've not been sitting twiddling my thumbs for weeks on end, here's where I'm at with my entry for Tomcat64's Tank Destroyer SIG. It's a Tamiya 1/35 Jagdpanther. Almost ready for primer, I just need to add some mesh over the engine vents first.

[TommyKillander]

Hey Guys,

Finished my Thud the other day. The kit is Trumpeter 1/72 F-105G Wild Weasel with some aftermarket details (PE, metal pitot tube, resin air-scoops). Painted with Mr Hobby Aqueous paints and weathered with 502 Abteilung oils.
The build was really enjoyable, but I had one "YGBSM-moment" when I realised that there where no decal placement instructions for all the underwing stuff.
I had look at the 1/32 scale kit instructions and improvise from there...




Tommy

[Rallychef]

Finally some real progress with the resin and photo etch DAF unit (Euro 6 conversion), this project has been a real pain, sapped my mojo, fought me all the way,and should have been finished weeks ago.
Poor fit between the resin and the donor kit ,Italeri donor parts cast in yellow and bleeding through the white topcoat (finally sprayed the whole cab in Ultimate black primer, then grey then white to finally achieve the finish I required.
The company who wrapped the truck refused to give us their artwork, despite the truck owners request (their intellectual property) so had to create them from actual truck photographs. (thanks Dogers Decals)
BUT we are on the last lap, trailer body needs primed and painted, all sub assemblies built and decals added, hope to get it off the bench by the end of the month
No more trucks for a month or two, going to build myself a model car next !



Cheers Rallychef