Page 1 of 1

Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Wed Oct 09, 2019 5:01 pm
by Kingdan
Image
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, October 11th**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Thu Oct 10, 2019 9:52 pm
by Hawkmoon
The A.F.V Club Achilles build continues. Bronco tracks assembled. Decals added front and rear, tools made painted and fitted, 50 cal assembled/painted, exhaust made up, crusted up/painted and the recovery hawser made up painted and fitted.

Started to apply the winter wash camo, im using Precision Ice and Snow winter camo paint for this.

ImagePA104647 by andrew purchase, on Flickr

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 8:04 am
by Tomcat64
Meng Kids Lancaster. Lovely quick little kit that went together much better than some mainstream kits I've battled over the last couple of years (looking at you Revell & Academy!). Only downside was using stickers instead of decals, but given it's a "Kids" kit that probably makes sense.

Paintwork was done with Ultimate Primer, Vallejo Model Air & a coat of AK Ultra Matte to finish.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 11:41 am
by F27pax
Good evening happy modellers.

Work progresses on the Micro-Mir 1/144 McDonnell Douglas MD-11. The wings are all painted (in TS-83 and my own mixture of Douglas Grey and Corogard). Hopefully the fuselage will be done in the coming week.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 12:45 pm
by digger303
Takom Mk.IV male
Trying to get it finished and off the shelf of doom. No real problems with the build. Finding the camo a pain in the ass which is what I have been doing this week. Still have to put the black border in and tidy up the camo.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 2:08 pm
by onemac
Unspecified scale Meng B-17G Eggplane - topcoat of MRP paints in Coastal Command colours completed. Had a decal failure but they were old and lifted some paint as I was rubbing them off :th:

Test fitting the 1/32 Revell Hawk intakes and discovered they are wrong way round :lol:

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 4:41 pm
by barryf1fan
Got the Tamiya Benetton B188 done!! WooHoo!
Love how it came out - by far the hardest paint scheme this pea brain has ever attempted (and not chucked in the trash!)

Built OOB and added only Scale Motorsports yellow CF for the radiator intakes.
Tamiya TS spray cans and brush paints (hope to get an airbrush soon).
Had to source new decals as the orig had yellowed a bit.
Build thread on ISM wip section.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 4:44 pm
by barryf1fan
Started this Fujimi Integra Type R for my youngest son (he has a silver Integra)
Will be built OOB with Tamiya TS spray cans and brushed paints
Just got the body parts attached and filled gaps and sanded down visible seams.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 4:50 pm
by barryf1fan
Finished this a couple months back and didn't have a chance to share it with the "Live Show". :D
(kinda proud of this one - came out really good for me...)
Tamiya Spain's No. 1 Yamaha YZR-M1 '04 Carlos Checa MotoGP bike
Built OOB with Tamiya TS spray cans and brushed paints.
Lot of learning on this one and really enjoyed the experience.

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 5:45 pm
by js1714
Greetings Slaves to the plastic and Sprue Smugglers,,this week we see progress being made on the Trumpeter 1:16 M16 Multiple Motor-Gun Carriage..Still plenty left to do and I'm enjoing every minute of it,,Hope you all have a great time on the show, Model on,,!! :dance: :dance:

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 6:13 pm
by DanEdmans
Good evening chaps, this week I finally finished my 1/24 Tamiya Opel Calibra Cliff.

For it's age its a great kit. The only issues I had were thick decals and a dodgy fitting bonnet.

It was built out the box using,

Ultimate Primers
Decanted Tamiya TS-14
Tamiya LP paints
Splash 2K
Zero textured paints
Ultimate decal solutions
Novus polish and Tamiya wax
Ultimate Apex used through out.

Have a great show ad a wonderful weekend everybody :cheers2:

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 6:22 pm
by Paul
First kit i've finished for some time now and one I've wanted to build for while, Love the Escort Cosworth and the Bastos scheme so nice to get this one in the display case. Although its a re release of an older kit its still a great kit
* Tamiya/Belkits 1/24 Escort Rs Cosworth
* Reji Bastos decals and Speedline wheels
* Primed in Ultimate White Primer
* Zero Bastos Red
* Tamiya TS-26 on the Wheels and Interior
* Pro Range 2k Clear
* All through the Ultimate Apex airbrush
* Pe and cloth seatbelts and Hobby Design Antenna
* Polished and Waxed ;)

Image

Re: Ism Friday's night live at the bench what have you been working on for *october 11th*

Posted: Fri Oct 11, 2019 11:01 pm
by barryf1fan
Sorry 'bout the multiple posts of different "work" - the rules don't say specifically that you can only post one piece per week. I just saw that you can only post one picture of your model. Now I know. :thumb1:

But I did notice that Paul had one on the forum and one on facebook (two different kits)... Not that it matters, I generally take a couple months or so for each kit. :lol: :lol: Just hadn't shared the ones I posted.

Anyhoo, enjoyed being a part of it and listening/watching the banter that was exchanged! Have a great weekend! :cheers2: