Global Scale Modeller

Posted: **Sat Nov 30, 2019 8:01 pm**

Going to start this baby it will an out of box build with scratch additions like wiring ect. I have already striped the chrome parts and tidied up the mould seams on the main body.

Progress so far is the lower body tub has been cleaned up and assembled and ready for undercoating tomorrow.

Posted: **Sat Nov 30, 2019 9:37 pm**

Epic! You don’t hang about do you

Posted: **Sun Dec 01, 2019 7:24 am**

Thanks for looking in and your comments Gary, it had to be done it was calling me from the box like an earworm

Posted: **Sun Dec 01, 2019 8:34 am**

looking forward to see this taking shape
have the older boxing in the stash
Have fun

Mark

Posted: **Sun Dec 01, 2019 8:34 pm**

Thanks for looking in and your comments every one

Posted: **Sun Dec 01, 2019 8:45 pm**

That's what I like to see a man on a mission to build as many things as possible well done that man

Posted: **Sun Dec 01, 2019 8:47 pm**

Today was spent preping the lower body tub. First a double check everything was ready then a coat of black primer inside and out. When it was dry the inside of the cockpit was sprayed semi gloss black.

When dry this was Masked off and then the rest of the tub sprayed with white undercoat. This will be left to cure for a couple of days then more prep before the top coats start to go on.

Posted: **Sun Dec 01, 2019 8:48 pm**

Thanks for looking in Dan just had to be done

Posted: **Sat Dec 07, 2019 8:14 pm**

The body had more prep where and if needed then four light Coates of Zero orange were applied.

Again the body was left to cure and then more prep where needed then the clear coat went on today.

Posted: **Sat Dec 07, 2019 8:35 pm**

I like that colour. When I've seen that livery before it can seem a bit flat, but that really pops!

Posted: **Sun Dec 08, 2019 9:17 am**

Thanks for looking in and your comments Pete. I do like Zero paints but you never see the real colour until the 2K goes on as the base colour coat is like a semi matt when dry and every time I get that wow as it pops for the first time.

Some more pics now the masking is off

Posted: **Sun Dec 08, 2019 10:24 am**

Yep that's orange, but nicely done....

Posted: **Sun Dec 08, 2019 3:32 pm**

This is looking really cool!!

Posted: **Sun Dec 08, 2019 3:42 pm**

Oh nice

Off to a cracking start HM.
I bought 3 TS rattle cans when i bought my own kit as i didnt know about Zero paints back them. Do you think 1 bottle of the Zero paint will be enough as i'll probably go down that road as well ?
Keep up the good work. I may not be that far behind you

Posted: **Sun Dec 08, 2019 4:39 pm**

Thanks for looking in and your comments John and John.

I have used about a quarter of a 60ml jar so far on the lower body and still have the rest of the upper body to spray. Also remember that the inside of the upper body will need to be sprayed the same colour too as its a striped down racer.

If I'm careful I could just about get away with one pot of paint but just in case I always buy 2. I have had to wait for paint too many times now having run out with just a little bit left to spray.

Its also a big body and will eat paint.

Andy

Posted: **Sun Dec 08, 2019 8:58 pm**

Suspension has been added front and rear next we start on the power house

Posted: **Wed Dec 11, 2019 7:43 pm**

engine is going together quite nicely and have started to add some detail.

Posted: **Wed Dec 11, 2019 8:38 pm**

Looking great so far

Keep at her

Posted: **Wed Dec 11, 2019 9:06 pm**

Sweet work here Hawkmoon! Awesome build

Posted: **Thu Dec 12, 2019 8:24 am**

Thanks for looking in and your comments every one

Posted: **Thu Dec 12, 2019 8:46 am**

great work
will try to follow have the older boxing over here

Mark

Posted: **Thu Dec 12, 2019 2:08 pm**

Thanks for looking in and your comments Mark

Posted: **Sat Dec 14, 2019 9:11 pm**

The engine is about done, dirtied it up a little with some panel wash. It wil be shoe horned into the tub in the morning.

Posted: **Sat Dec 14, 2019 11:12 pm**

The difference in detail between 1/12 & 1/24 is really big! Awesome job

Posted: **Sun Dec 15, 2019 8:31 am**

Thanks for looking in and your comments Pete. Lots of small parts to paint and clean up if you strip the chrome but it goes together well

Posted: **Sun Dec 15, 2019 10:37 am**

Engine is in, tight fit but no real problems here

Posted: **Thu Dec 19, 2019 8:08 pm**

I have been a bit busy with life the past week or so but have managed to do a bit where possible. The dash was made up and fitted along with the steering shaft being fixed to the steering rack then the oil tank ,battery fuel tank. heater, fire extinguishers and various other parts painted and fixed in position. the front three rads were also fitted along with the pipe work front to rear. started to make up the seat.

PC195525 by andrew purchase, on Flickr

PC195526 by andrew purchase, on Flickr

PC195529 by andrew purchase, on Flickr

PC195530 by andrew purchase, on Flickr

PC195532 by andrew purchase, on Flickr

PC195538 by andrew purchase, on Flickr

PC195535 by andrew purchase, on Flickr

PC195536 by andrew purchase, on Flickr

Posted: **Thu Dec 19, 2019 8:51 pm**

Oh man
You are kicking orange Azz on this build

Super work

Posted: **Thu Dec 19, 2019 11:02 pm**

Twokidsnosleep wrote: Thu Dec 19, 2019 8:51 pm Oh man
You are kicking orange Azz on this build
Super work

Ditto!

Posted: **Thu Dec 19, 2019 11:19 pm**

Looking sweeeeeettttt

Posted: **Thu Dec 19, 2019 11:35 pm**

Wish I could get my metals as..... metal-y!

Posted: **Fri Dec 20, 2019 2:20 pm**

Pete75 wrote: Thu Dec 19, 2019 11:02 pm
Twokidsnosleep wrote: Thu Dec 19, 2019 8:51 pm Oh man
You are kicking orange Azz on this build
Super work
Ditto!

Kingdan wrote: Thu Dec 19, 2019 11:19 pm Looking sweeeeeettttt

Twokidsnosleep wrote: Thu Dec 19, 2019 8:51 pm Oh man
You are kicking orange Azz on this build
Super work

Thanks for looking in and your comments everyone

Posted: **Fri Dec 20, 2019 2:30 pm**

tomabromaitis wrote: Thu Dec 19, 2019 11:35 pm Wish I could get my metals as..... metal-y!

For ages I had the same problem with Alclad metals but I then found I was trying to do it too quick by laying down too much in one go the secret is to do it in mist coats slowly building up the paint. But beware you can still over do it so be careful.

Also for a different finish I sometimes use a semi gloss black rather than a full gloss black the small oil tank on the left hand side was undercoated with full gloss black whilst the large fuel tank had the semi gloss treatment. Both were sprayed with Alclad Aircraft Aluminium but the fuel tank has a darker finish to the shinier oil tank.

A black wash has also been applied to bring out the high lights too.

Andy

Posted: **Fri Dec 20, 2019 3:18 pm**

very nice work
keep on going like this masterpiece

Mark

Posted: **Fri Dec 20, 2019 6:29 pm**

markske wrote: Fri Dec 20, 2019 3:18 pm very nice work
keep on going like this masterpiece

Mark

Thanks for looking in and your comments Mark

Posted: **Fri Dec 20, 2019 6:31 pm**

Forgot to add the hose clamps to the front side rads now done and the seat has had a coat of undercoat

PC205540 by andrew purchase, on Flickr

PC205542 by andrew purchase, on Flickr

Posted: **Sat Dec 21, 2019 8:05 pm**

The seat was sprayed up and fitted along with the roll cage. The seat belts were then added. The upper body work has been prepped and then sprayed with undercoat. Next some rubbing back and the white undercoat will go on.

PC215545 by andrew purchase, on Flickr

PC215547 by andrew purchase, on Flickr

PC215549 by andrew purchase, on Flickr

PC215550 by andrew purchase, on Flickr

PC215552 by andrew purchase, on Flickr

PC215554 by andrew purchase, on Flickr

Posted: **Sun Dec 22, 2019 8:15 pm**

The wheel rims have been sprayed with Vallejo liquid gold on the inner halves and liquid silver on the outer rims, these were then joined together and are now ready for a clear coat.

The upper body parts were rubbed back and then given a couple of coats of white primer. After a clean up where needed when the paint was dry the Orange went on. The main body was sprayed inside and out and where needed on the doors,front fender, hood and boot.

The sprayed parts will be checked in good light to ensure I have an even colour coating then any rectification needed before the decals are added and then its clear coat time.

PC225556 by andrew purchase, on Flickr

PC225559 by andrew purchase, on Flickr

PC225563 by andrew purchase, on Flickr

PC225565 by andrew purchase, on Flickr

Posted: **Wed Dec 25, 2019 7:15 pm**

The majority of the body decals have been added . I will clear coat tomorrow

PC255567 by andrew purchase, on Flickr

PC255568 by andrew purchase, on Flickr

PC255569 by andrew purchase, on Flickr

PC255572 by andrew purchase, on Flickr

PC255573 by andrew purchase, on Flickr

Posted: **Wed Dec 25, 2019 8:16 pm**

This is going to be epic

Posted: **Thu Dec 26, 2019 9:51 am**

Gary30 wrote: Wed Dec 25, 2019 8:16 pm This is going to be epic

Thanks for looking in and your comments Gary

Posted: **Thu Dec 26, 2019 9:52 am**

this is going fast
nice work you put down here i love it
keep going

Mark

Posted: **Thu Dec 26, 2019 2:19 pm**

Nice one! Loving those two-tone wheels - was the masking difficult?

Posted: **Thu Dec 26, 2019 6:33 pm**

markske wrote: Thu Dec 26, 2019 9:52 am this is going fast
nice work you put down here i love it
keep going

Mark

Thanks for looking in and your comments Mark

Posted: **Thu Dec 26, 2019 6:36 pm**

Pete75 wrote: Thu Dec 26, 2019 2:19 pm Nice one! Loving those two-tone wheels - was the masking difficult?

Hi Pete thanks for looking in and your comments

The wheel hubs in the kit are supplied in two parts an inner and an outer for each hub so it was easy enough to spray the inner's gold and the outer's silver then glue them together when dry.

Posted: **Thu Dec 26, 2019 6:48 pm**

The wheels and the rest of the bodywork have been clear coated and another decal added to the boot/ engine cover.

PC265585 by andrew purchase, on Flickr

PC265575 by andrew purchase, on Flickr

PC265578 by andrew purchase, on Flickr

PC265579 by andrew purchase, on Flickr

PC265588 by andrew purchase, on Flickr

PC265583 by andrew purchase, on Flickr

Posted: **Thu Dec 26, 2019 11:14 pm**

Wow that orange is looking great it's making me either want a satsuma or get pissed on jäger bombs lol
Nice work mate

Posted: **Fri Dec 27, 2019 7:26 am**

Thanks for looking in and your comments Dan

Posted: **Fri Dec 27, 2019 6:42 pm**

All done . Link to finished builds below-

posting.php?f=46&mode=post&sid=f0da018c ... 99024c2088

PC275589 by andrew purchase, on Flickr

Posted: **Fri Dec 27, 2019 6:43 pm**

Hawkmoon wrote: Fri Dec 27, 2019 6:42 pm All done . Link to finished builds below-

viewtopic.php?f=46&t=27975

PC275589 by andrew purchase, on Flickr

Global Scale Modeller

Tamiya 1/12 Porsche 934 'Yagermeister'

Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'

Re: Tamiya 1/12 Porsche 934 'Yagermeister'