Page 1 of 1

Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Thu Jan 02, 2020 7:13 pm
by Kingdan
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, January 3rd**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Thu Jan 02, 2020 7:21 pm
by Hawkmoon
1/12 Tamiya Porsche 934 'Jagermeister'

Nice kit to build although its starting to show its age now [1976 molds ] but it certainly makes a show stopper when finished.

Paint used-

Tamiya Lacquer semi gloss black.
Tamiya acrylics.
AK Liquid Metals [alcohol based metal paint] used on the wheels.
Alclad metal paints.
Molatow liquid chrome used on the re-chromed parts.
Zero Jagermeister orange.
Zero 2K Diamond clear.
Zero window mask.

Final assembly where it was all screwed together went without any problems and the attachment points are all hidden .

ImagePC275593 by andrew purchase, on Flickr

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Thu Jan 02, 2020 9:30 pm
by Twokidsnosleep
Worked on this over my Christmas Break for the ISM Forum Helicopter buddy build sig
Revell 1/35 Bell H-13H MASH Helicopter on its landing pad
Mostly Ultimate Primer paints used with some silvers from AK True Metal
My favourite part is the sign made from some scrap wood :D

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Thu Jan 02, 2020 10:10 pm
by KalebB
Tamiya 1/35th scale T-34/76

Currently sitting at a winter white wash camo and a dark wash. Next will be decals, matte clear coat, weathering, etc

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Thu Jan 02, 2020 11:58 pm
by Tat2bhoy
Finished the Miniart 1/35 T-54-2 Soviet tank for the Track and Wings GB over the festive period.
Painted using the Ammo Mig soviet green modulation set and weathered using oils and various pigments

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 12:13 pm
by F27pax
Happy New Year Happy Modellers.

Tonight, fresh from its final decalling, is this 1/144 Zvezda Airbus A.320 in the livery of Kiwi International. The paint is Tamiya Pure White on the fuselage, Airbus grey on the flying surfaces and various splashes of Tamiya metallic TS lacquer paints. The decals are from Oldmodels, Ric Warcup, Skyline, 8S Decals and and my spares box.

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 1:29 pm
by bfrd
This week I finished up my entry into the tracks and wings sig. It is a 1:144 scale Zvezda Airbus A320. The decals are inkjet aftermarket and were terrible. I ended up masking and painting the red stripe because the decals wouldn't stick well enough to handle masking. The model was primed in Ultimate white and painted with Vallejo Model Air colors. The base is extruded polystyrene insulation material. I covered it with toilet paper and a watered-down PVA mixture. I did the base paint with cheap acrylics and topped with Tamiya translucent blue and smoke. The final clear is Aquagloss. To make the impact splash I took a small jar of water and PVA glue and tore up small bits of toilet paper. I then let that turn into mush and placed it around a small divot in the base.

PS: I think my biggest accomplishment for this build was NOT breaking off the tiny little canards on the tips of the wings. I came close, but they stayed on!!

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 1:51 pm
by onemac
1/32 Revell Tornado GR 1 - WIP.

You get the best advice in the hangouts - paint them pink they said :doh: ...... so I did :roll:

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 1:52 pm
by Gary30
Finished off my Tyrrell P34 this week, barring a couple of really minor final touches, looking forward to moving on to a new project now though:

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 5:57 pm
by RocketSurgeon
I almost finished painting my Trumpeter T-80BV. Still have a million separately painted parts to add to the turret and a couple to the hull, but then it's ready for a clearcoat and weathering.
Primed with Ultimate black, painted with Tamiya, Akan and Vallejo acrylics through my Apex. Crappy picture taken with my iPhone.

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 7:18 pm
by Paul
Fujimi 1/24 Mercedes SLS AMG GT3
Primed in Tamiya Pink Primer
Base Painted in Tamiya LP 7
Racing 43 Decals
Gravity (Spain) 2k Clearcoat
All through the Ultimate Apex airbrush
2k Sanded with Micromesh and polished with... polish

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Fri Jan 03, 2020 8:36 pm
by JustinHart
Monogram 1:24 Lotus Esprit

Interior is finished except for the gauge decals. Hope to get those this weekend. Then I'll have he whole kit wrapped up.
Base color is 50/50 Zero Ferrari Beige and Interior saddle tan.
Painted burl-wood effect on the door controls, Gauge cluster, and shift knob.
Have a great weekend.

Image

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Sat Jan 04, 2020 6:26 am
by Gary30
I just checked in on the last hour of chat from last night, more than happy for the Ultimate goody bag to go to M4H, I was in chat while the vote was going on but had to shoot off.

Well done Scott, some great work all round.

Re: Ism Friday's night live at the bench what have you been working on for *January. 3rd*

Posted: Sat Jan 04, 2020 8:10 am
by Twokidsnosleep
Gary30 wrote: Sat Jan 04, 2020 6:26 am I just checked in on the last hour of chat from last night, more than happy for the Ultimate goody bag to go to M4H, I was in chat while the vote was going on but had to shoot off.

Well done Scott, some great work all round.
Ya good, happy for that tooo....I should have sent it straight there
My bad :oops: