So this Revell 1/35 Bell H-13H helicopter is finished
What an awesome gb idea and I have had a blast with it.
It turned this into a MASH helicopter the second I saw there were decals for it in the kit.
The TV show MASH was a huge influence on me as a child. I watched reruns daily and the weekly new show.
I am sure I cried during the last episode and have never watched it again, not even reruns now.
I thought I wanted to be a surgeon b/c of MASH and worshipped those guys. My personality is like BJ’s more than Hawkeye.
My grade 12 yr a senior medical student sat me down and told me to become a dentist and not a doctor. He was my oldest sister’s boyfriend at the time and she was finishing dentistry as he was finishing his medical undergrad...and then 4-6-8 more years after that.
So I changed but always loved the idea of being a surgeon.
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 7:26 pm
by Twokidsnosleep
A little video summary: Cannot do the copyrighted MASH theme unfortunately
The photos:
And there we go
A big thank you to @Tomcat64 for starting this up
And lots of praise to those commenting, posting and spurring me in
Thanks Guys
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 7:31 pm
by Hawkmoon
Nicely done and a top result
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 7:33 pm
by Twokidsnosleep
Hawkmoon wrote: Thu Jan 02, 2020 7:31 pm Nicely done and a top result
My friend, thanks for following along
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 7:52 pm
by DBMiller
Outstanding! I love the sign and landing pad!
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 8:10 pm
by Twokidsnosleep
DBMiller wrote: Thu Jan 02, 2020 7:52 pm
Outstanding! I love the sign and landing pad!
Thank you sir, they really do finish things off
Honestly that was the easiest part of the build! DB
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 8:13 pm
by smokeriderdon
I loved MASH as well. AndI can tell you I did cry during the last one. You did a fantastic job. In my mind you are already the winner.
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 8:29 pm
by Twokidsnosleep
smokeriderdon wrote: Thu Jan 02, 2020 8:13 pm
I loved MASH as well. AndI can tell you I did cry during the last one. You did a fantastic job. In my mind you are already the winner.
Thanks man, I loved that show too
I have no interest in any competition for the sig or gb so they can count me out
This was just for fun and a bit of thanks to the show for my childhood For following along Don
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 9:18 pm
by KalebB
Beautifully done sir
I teared up a bit on the last episode, but I can't stop rewatching the show. One of the best in my opinion.
Cheers
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 9:21 pm
by Twokidsnosleep
KalebB wrote: Thu Jan 02, 2020 9:18 pm
Beautifully done sir
I teared up a bit on the last episode, but I can't stop rewatching the show. One of the best in my opinion.
Cheers
Thank you for your support following along
You were a big motivational factor and kept this build engaging for me To you sir
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 9:28 pm
by bfrd
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 9:31 pm
by Twokidsnosleep
bfrd wrote: Thu Jan 02, 2020 9:28 pm
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
Nah, this is just me on a Christmas Vacation having fun modelling
I have a non competition clause
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 9:49 pm
by Kingdan
that looks freakin awesome mate nicely done Scott
Re: MASH 4077 Homage
Posted: Thu Jan 02, 2020 10:32 pm
by Twokidsnosleep
Kingdan wrote: Thu Jan 02, 2020 9:49 pm
that looks freakin awesome mate nicely done Scott
Cheers Danno, thanks for following along mate
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 2:59 am
by RangerNeil
Seeing the build was amazing - to see it set in the tribute diorama is nothing short of awesome. Well done sir!!
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 3:26 am
by Twokidsnosleep
RangerNeil wrote: Fri Jan 03, 2020 2:59 am
Seeing the build was amazing - to see it set in the tribute diorama is nothing short of awesome. Well done sir!!
Bud
Some really nice words, thanks
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 9:11 am
by Quax
bfrd wrote: Thu Jan 02, 2020 9:28 pm
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
I agree Matthew it is getting tiresome just how consistently good Scott is, perhaps we should instigate a handicap system where "the boys" go round and remove a finger until he's at the same standard as the rest of us As that seems unlikly I can only offer:
Paul
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 9:56 am
by Stokesy44
Cracking build and finish mate
Not sure about the longevity of that sign though! Little bit of rotor pruning......
bfrd wrote: Thu Jan 02, 2020 9:28 pm
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
I agree Matthew it is getting tiresome just how consistently good Scott is, perhaps we should instigate a handicap system where "the boys" go round and remove a finger until he's at the same standard as the rest of us As that seems unlikly I can only offer:
Paul
He is my friend, and I can't condone violence against him. Perhaps we go in the other direction and send him lots of rum. Perhaps he will stay sloshed enough to be on our level.
bfrd wrote: Thu Jan 02, 2020 9:28 pm
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
I agree Matthew it is getting tiresome just how consistently good Scott is, perhaps we should instigate a handicap system where "the boys" go round and remove a finger until he's at the same standard as the rest of us As that seems unlikly I can only offer:
Paul
Uhhh, thanks?
All you guys model as well if not better than I do.
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 4:55 pm
by Twokidsnosleep
Stokesy44 wrote: Fri Jan 03, 2020 9:56 am
Cracking build and finish mate
Not sure about the longevity of that sign though! Little bit of rotor pruning......
bfrd wrote: Thu Jan 02, 2020 9:28 pm
Gentlemen, in case you hadn’t noticed; this is the bar. It is set quite high.
I agree Matthew it is getting tiresome just how consistently good Scott is, perhaps we should instigate a handicap system where "the boys" go round and remove a finger until he's at the same standard as the rest of us As that seems unlikly I can only offer:
Paul
He is my friend, and I can't condone violence against him. Perhaps we go in the other direction and send him lots of rum. Perhaps he will stay sloshed enough to be on our level.
Yes
A Spiced rum will always find a happy home here
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 5:39 pm
by jmurphy18
Awesome Scott! As I said I give this build an 11!! Quoting Spinal Tap. I ditto BFD on setting the bar here!! LOL I look at yours and I want to hide mine, but then you just push me to do better and learn more!
I spent many a day watching M.A.S.H. 4077 This is a wonderful tribute.
Re: MASH 4077 Homage
Posted: Fri Jan 03, 2020 7:09 pm
by Twokidsnosleep
jmurphy18 wrote: Fri Jan 03, 2020 5:39 pm
Awesome Scott! As I said I give this build an 11!! Quoting Spinal Tap. I ditto BFD on setting the bar here!! LOL I look at yours and I want to hide mine, but then you just push me to do better and learn more!
I spent many a day watching M.A.S.H. 4077 This is a wonderful tribute.
Thank you for the kind words
I really don’t like the idea of anything I make intimidating someone to stop doing what they are making
I try to show simple and inexpensive things to use and ways to do stuff In my builds that make it look better and detail it more.
I am no master by any means and am happy to share any techniques with anyone...just ask.
Push you to do better, Murph THAT I like. You have done the same for me
Re: MASH 4077 Homage
Posted: Sat Jan 04, 2020 5:24 pm
by jmurphy18
Twokidsnosleep wrote: Fri Jan 03, 2020 7:09 pm
Push you to do better, Murph THAT I like. You have done the same for me
Thanks Scott!! Some days on this 1/35 I think I feel overwhelmed and bit off too much. But I am making progress and I got some ideas from you . I even get to do an update today
HAGD!
Re: MASH 4077 Homage
Posted: Sun Jan 05, 2020 10:32 am
by TommyKillander
Holy Styrene!
This is totally outstanding!
What a fantastic vignette with the sign and everything
That is worth a toast I think
Tommy
Re: MASH 4077 Homage
Posted: Sun Jan 05, 2020 4:05 pm
by Twokidsnosleep
TommyKillander wrote: Sun Jan 05, 2020 10:32 am
Holy Styrene!
This is totally outstanding!
What a fantastic vignette with the sign and everything
That is worth a toast I think
Tommy
Ha ha, awesome post Tommy
Re: MASH 4077 Homage
Posted: Mon Jan 06, 2020 3:18 pm
by Tomcat64
That's an awesome result mate and well deserved BOTW on the live show too
So glad you stuffed the Horseman back into his Sleep Hollow and dug out a 'copter instead
Thanks for joining in!
Re: MASH 4077 Homage
Posted: Mon Jan 06, 2020 4:03 pm
by Twokidsnosleep
Tomcat64 wrote: Mon Jan 06, 2020 3:18 pm
That's an awesome result mate and well deserved BOTW on the live show too
So glad you stuffed the Horseman back into his Sleep Hollow and dug out a 'copter instead
Thanks for joining in!
Cheers
I had an absolute blast with this
It was an easy build and base. It just kinda wanted to come out of me.
Have not had a build flow out so naturally before where things just seemed to click...well maybe that Star Wars one
Re: MASH 4077 Homage
Posted: Mon Jan 06, 2020 7:02 pm
by BobM
Hawkeye approves....
And so do I...
Re: MASH 4077 Homage
Posted: Mon Jan 06, 2020 8:50 pm
by Twokidsnosleep
BobM wrote: Mon Jan 06, 2020 7:02 pm
Hawkeye approves....
And so do I...
Thanks
Love it Bob
Such an Iconic character, Hawkeye
Re: MASH 4077 Homage
Posted: Mon Jan 06, 2020 10:58 pm
by digger303
Marvelous another great diorama from such a fertile mind. It comes up with a lot of engaging banter as well... ....was going to say something else.....
Re: MASH 4077 Homage
Posted: Mon Jan 20, 2020 9:04 pm
by aur0ra145
That is a great looking build!
Re: MASH 4077 Homage
Posted: Mon Jan 20, 2020 9:40 pm
by Twokidsnosleep
aur0ra145 wrote: Mon Jan 20, 2020 9:04 pm
That is a great looking build!