Page 1 of 1
Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 2:30 am
by Kingdan

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, February 28th**
To Claim Your Prize please email
ismprizeclaim@gmail.com with your You tube name, real name and full postal address
Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!
This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.
We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.
Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 3:39 am
by KalebB
Finished this build
Tamiya 1/35th SU-122
-Primed in badger Stynylrez
-Painted in Vallejo Model Air 4BO Russian Green and AK Interactives washable white
-weathered with Mig enamal washes, Mig Pigments, and Vallejo black brown for paint chips

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 10:54 am
by onemac
1/48 Trumpeter F-106A Delta Dart:
Black nose curve fixed and all the grey paint that lifted sorted. Intakes and tailpipe painted silver and is now ready to clear coat. PE on the cockpit of the 1/32 Revell Hawk continues to upset me

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 7:47 pm
by Hawkmoon
Starting to add the radiators,pipework and inter coolers to the McLaren 4-4.
P2266228 by
andrew purchase, on Flickr
Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 9:03 pm
by Paul
Tamiya 1/24 Ford Sierra RS Cosworth, again doing as a road/track day car. A lot more limitations with this kit than the escort due to its age but I did the best I could with what I had
* Tamiya 1/24 Ford Sierra RS Cosworth
* Primed in Ultimate Grey Primer
* Base painted in Ford Moonstone Blue (from touch up paint)
* Tamiya black panel line wash
* Cleared in Gravity (Spain) 2k Clearcoat
* Scale production BBS RS wheels
* Tamiya LP paints used elsewhere
* All sprayed through the Ultimate Apex airbrush
* Hobby Design Recaro seat, Micro ballooned for texture
* Pe and ribbon Harnesses

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Wed Feb 26, 2020 11:16 pm
by RangerNeil
Starting to finalize the Kamov "Black Ghost" - a bit of a misnomer as the painting guide gives Humbrol 79 Blue-Grey as the overall finish. Still debating whether to use that or, as this is an entirely fictitious design, go for a more modern Russian splinter camouflage.
Fuselage is complete bar glazing and undercarriage is going on. Rotor head is complete and just needs permanent attachment then the blades added. I am leaving the glazing as I have asked Revell if they had a replacement decal sheet both to increase the finishing options and because it came with instrument panel and cockpit decals... Next step is the armament.

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Thu Feb 27, 2020 4:32 pm
by Kingdan
Working on this alien (don't want to call him Paul)
Kit manufacturer is killerkits/creaturefeatures
Not sure on scale he is about 13 inches tall
Painted in a plethora of Tamiya lp paints with some badger minitaire paint thrown in
All sprayed with the fabulous ultimate apex airbrush
Still a bunch to do

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Fri Feb 28, 2020 7:00 am
by Tankboy76

Just glued the interior of this 1970 'Cuda into the body. Many little pieces are left but it looks like my desk will be clean come the start of the '80s build.This is the Revell kit - relatively new tooling which has so far gone together very well. The purple is Iridescent Plum Purple from Mission Models with a polished clear coat.
Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Fri Feb 28, 2020 11:33 am
by F27pax
Good evening happy modellers.
Here’s another airliner. This time an Eastern Express 1/144 Airbus A.220 in the livery of Swiss Airlines. The main colour (one might say the only colour) is Tamiya TS-26 Pure White. There are splashes of TS-83 Metallic Silver on the leading edges and nine different colours on the engine pods (not that you’d notice). For an Eastern Express kit this is not the worst I’ve made, but that’s not saying much.

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Fri Feb 28, 2020 2:15 pm
by Tomcat64
Have just about finished off the crew for my 1/35 Tamiya Late Tiger I. Paints have been predominantly Vallejo Model colour and doing the camo pretty much sent me cross eyed. They've got a few more details to finish off before installation into the tank.

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Fri Feb 28, 2020 5:23 pm
by barryf1fan
Working on the "now" challenging Revell Corvette C7R, 1/25.
Painted in Tamiya X-8 lemon yellow & X-18 semi-gloss black, over Tamiya fine grey surface primer.
Two small areas to fix

then the decals will follow.
Have a great show and an even better weekend, guys!

Re: Ism Friday's night live at the bench what have you been working on for *February 28th*
Posted: Fri Feb 28, 2020 7:40 pm
by RocketSurgeon
This week I've been slowly working on decaling my Platz M6 GT3. It is mostly done now with only a few small bits to go. I was a bit scared of the larger decals as this is my first time decorating a racecar model, but Paul's 'how to' videos and the Ultimate Decal Solutions helped a lot. I used the Extra Strong solution for the M stripes and the carbon decals. This stuff is brilliant. Seriously, I can't recommend it enough. Cheers Paul!
I thought I'd snap a couple of pictures of the model before I go ahead and destroy it all with the clear coat. Wish me luck!
