Global Scale Modeller

Posted: **Sun Mar 01, 2020 8:57 pm**

This one has been in the bottom of a storage drawer for too long.

Classic body stylings with a muscle car flair. This thing was the fastest production car until the F40 and others caught up
I have a Testarossa and a F40 both partially built on the shelf of doom at the moment, but will push this one through the cue into the frontish of the line.

Posted: **Sun Mar 01, 2020 8:58 pm**

This is a great Jay Leno’s garage video of the car

Posted: **Sun Mar 01, 2020 9:23 pm**

Will be following this one for sure, love the styling of this car. Enjoy!

Posted: **Sun Mar 01, 2020 9:26 pm**

ryan81 wrote: Sun Mar 01, 2020 9:23 pm Will be following this one for sure, love the styling of this car. Enjoy!

Cheers

Me too, she is a lovely beast

Posted: **Mon Mar 02, 2020 3:09 am**

Oooo lovely! Nice big scale too, can’t wait to see the paint job on this classic! Good luck Scott

Posted: **Mon Mar 02, 2020 6:14 am**

Gary30 wrote: Mon Mar 02, 2020 3:09 am Oooo lovely! Nice big scale too, can’t wait to see the paint job on this classic! Good luck Scott

Cheers Gary

Yes it should be interesting and I think I saw it say ‘enthusiast series’ on the instructions...that means more details.
I am pushing to finish the little mini bike before starting this big red horse

BTW, my apologies for slagging the Porsche 959...
I detest when people do that to me...”oh you are into xyz, I hate that. PQRS is Soooo much better”
Need my mom around to say “ if you don’t have anything nice to say, shut the hell up”
My apologies bud

Posted: **Mon Mar 02, 2020 8:01 am**

Twokidsnosleep wrote: Mon Mar 02, 2020 6:14 am BTW, my apologies for slagging the Porsche 959...
I detest when people do that to me...”oh you are into xyz, I hate that. PQRS is Soooo much better”
Need my mom around to say “ if you don’t have anything nice to say, shut the hell up”
My apologies bud

Don't worry about it buddy, we're all entitled to opinions, otherwise the world would be a boring place! To be honest, I agree with you in some respects, the 959 is a bit of an ugly duckling, but I've always rooted for the underdog. It's arch rival, the F40, was always my bedroom wall pin up, and I built an F40 (VERY badly) as a kid and as I've never built a Porsche, and the kit was dirt cheap, I thought why the hell not give it a go.

If I can get my hands on another F40 kit before the GB is up I may build that too, would make a great pair next to each other in my cabinet.

Happy building

Posted: **Tue Mar 03, 2020 12:15 am**

Gary30 wrote: Mon Mar 02, 2020 8:01 am
Twokidsnosleep wrote: Mon Mar 02, 2020 6:14 am BTW, my apologies for slagging the Porsche 959...
I detest when people do that to me...”oh you are into xyz, I hate that. PQRS is Soooo much better”
Need my mom around to say “ if you don’t have anything nice to say, shut the hell up”
My apologies bud
Don't worry about it buddy, we're all entitled to opinions, otherwise the world would be a boring place! To be honest, I agree with you in some respects, the 959 is a bit of an ugly duckling, but I've always rooted for the underdog. It's arch rival, the F40, was always my bedroom wall pin up, and I built an F40 (VERY badly) as a kid and as I've never built a Porsche, and the kit was dirt cheap, I thought why the hell not give it a go.

If I can get my hands on another F40 kit before the GB is up I may build that too, would make a great pair next to each other in my cabinet.

Happy building

This may be a dumb question, but I've seen it referenced a lot - what does GB mean?

Posted: **Tue Mar 03, 2020 1:46 am**

ryan81 wrote: Tue Mar 03, 2020 12:15 am
Gary30 wrote: Mon Mar 02, 2020 8:01 am
Twokidsnosleep wrote: Mon Mar 02, 2020 6:14 am BTW, my apologies for slagging the Porsche 959...
I detest when people do that to me...”oh you are into xyz, I hate that. PQRS is Soooo much better”
Need my mom around to say “ if you don’t have anything nice to say, shut the hell up”
My apologies bud
Don't worry about it buddy, we're all entitled to opinions, otherwise the world would be a boring place! To be honest, I agree with you in some respects, the 959 is a bit of an ugly duckling, but I've always rooted for the underdog. It's arch rival, the F40, was always my bedroom wall pin up, and I built an F40 (VERY badly) as a kid and as I've never built a Porsche, and the kit was dirt cheap, I thought why the hell not give it a go.

If I can get my hands on another F40 kit before the GB is up I may build that too, would make a great pair next to each other in my cabinet.

Happy building
This may be a dumb question, but I've seen it referenced a lot - what does GB mean?

Group build mate

Posted: **Tue Mar 03, 2020 2:32 am**

Twokidsnosleep wrote: Tue Mar 03, 2020 1:46 am
ryan81 wrote: Tue Mar 03, 2020 12:15 am
Gary30 wrote: Mon Mar 02, 2020 8:01 am

Don't worry about it buddy, we're all entitled to opinions, otherwise the world would be a boring place! To be honest, I agree with you in some respects, the 959 is a bit of an ugly duckling, but I've always rooted for the underdog. It's arch rival, the F40, was always my bedroom wall pin up, and I built an F40 (VERY badly) as a kid and as I've never built a Porsche, and the kit was dirt cheap, I thought why the hell not give it a go.

If I can get my hands on another F40 kit before the GB is up I may build that too, would make a great pair next to each other in my cabinet.

Happy building
This may be a dumb question, but I've seen it referenced a lot - what does GB mean?
Group build mate

Oh duh, cheers

Posted: **Fri Mar 13, 2020 6:02 pm**

Alrighty gents, she is out of the box and moving forward
I trimmed and sanded some body seams on her big voluptuous curves

Then did a comparison photo with
1/8 Pocher Testarossa...a much more classic 80's car, but already started it.
1/25 Fujimi Daytona Spyder
1/16 GTO is right in the middle

Posted: **Sat Mar 14, 2020 9:11 pm**

So if you don’t know me, I love engines.
I especially love to detail scale engines and think there should be solitary kits of them...like this one for sure; it is gorgeous!
So far the work involves lots of priming Ultimate white and painting flat aluminum Alclad and aluminum Mr Metal
The kit has an engine stand on the left and the block is sitting in my fabricated one that I made for the F40.
I will put those engines side by side when I get this one done

The heads get the ultimate white and then flat red Tamiya

I am thinking of leaving the exhaust pipes white àla F1 Ferraris of old
The other thing painted was the gold around the driveshaft...that is decanted Tamiya spray TS 21. It is absolutely lovely stuff to work with, just beautiful.The brake callipers will get the same treatment.
The kit is detailed and lovely, but the parts have heavy seam lines, ejector pins and weird holes. There is no way in heck you could leave these on the sprue and paint them as one UTube guru claims is best for small parts. No Freaking Way.
I won’t get all the lines and marks off, will try, but am certain to miss some
Moving forward

Posted: **Sat Mar 14, 2020 10:32 pm**

Vs the F 40 engine same scale and maker

Posted: **Sun Mar 15, 2020 3:32 am**

Lots of parts on the cocktail sticks painted and drying

I got her to here tonight

Posted: **Sun Mar 15, 2020 6:21 am**

Coming together very nicely and great work as always.

Posted: **Sun Mar 15, 2020 7:09 am**

Painting skills are coming to the fore here with surgical precision.

Posted: **Sun Mar 15, 2020 11:09 am**

Looking good, love the size comparison..

Posted: **Sun Mar 15, 2020 4:31 pm**

Cheers guys

Having fun building her
Anticipating having some time off from work with this Pandemic thingy..maybe I can blast through and finish

Posted: **Sun Mar 15, 2020 5:21 pm**

Beautiful job as ever with these engines Scott!

Paul

Posted: **Sun Mar 15, 2020 6:41 pm**

Quax wrote: Sun Mar 15, 2020 5:21 pm Beautiful job as ever with these engines Scott!

Paul

Paul
I am having fun...and swearing just a bit

Posted: **Mon Mar 16, 2020 1:26 am**

I got a fair bit done this morning while awaiting for things to warm up outside
Some black pin wash and some oil stains too. Then wiring up the engine...using the kit’s red wire
Golden carbon black thick acrylic for the plugs, some round styrene rod for the distributor and some bent photoetch edges from a seatbelt set used to make the wire retainer.

She is getting there

Posted: **Thu Mar 19, 2020 6:15 pm**

Dry fit of finished engine to chassis to body...gonna be tight and slightly warped

Posted: **Thu Mar 19, 2020 8:38 pm**

Twokidsnosleep wrote: Sat Mar 14, 2020 9:11 pm So if you don’t know me, I love engines.
I especially love to detail scale engines and think there should be solitary kits of them...like this one for sure; it is gorgeous!
So far the work involves lots of priming Ultimate white and painting flat aluminum Alclad and aluminum Mr Metal
The kit has an engine stand on the left and the block is sitting in my fabricated one that I made for the F40.
I will put those engines side by side when I get this one done

The heads get the ultimate white and then flat red Tamiya

I am thinking of leaving the exhaust pipes white àla F1 Ferraris of old
The other thing painted was the gold around the driveshaft...that is decanted Tamiya spray TS 21. It is absolutely lovely stuff to work with, just beautiful.The brake callipers will get the same treatment.
The kit is detailed and lovely, but the parts have heavy seam lines, ejector pins and weird holes. There is no way in heck you could leave these on the sprue and paint them as one UTube guru claims is best for small parts. No Freaking Way.
I won’t get all the lines and marks off, will try, but am certain to miss some
Moving forward

That's awesome! When I first got into modelling (only been six months) engines were one of my first thoughts of what I'd like to build. What's the name of this model?

Posted: **Thu Mar 19, 2020 9:31 pm**

I think I shall name him Steve, no maybe Guido

From the thread title and first posts showing the Kit box, ahem

Fujimi Ferrari 288 GTO 1/16

Posted: **Thu Mar 19, 2020 9:34 pm**

Twokidsnosleep wrote: Thu Mar 19, 2020 9:31 pm I think I shall name him Steve, no maybe Guido

From the thread title and first posts showing the Kit box, ahem
Fujimi Ferrari 288 GTO 1/16

Oh I misread, I thought the engine was a separate kit

Posted: **Fri Mar 20, 2020 1:16 am**

ryan81 wrote: Thu Mar 19, 2020 9:34 pm
Twokidsnosleep wrote: Thu Mar 19, 2020 9:31 pm I think I shall name him Steve, no maybe Guido

From the thread title and first posts showing the Kit box, ahem
Fujimi Ferrari 288 GTO 1/16
Oh I misread, I thought the engine was a separate kit

Ahh I get it
Nope. Just poking fun at ya

Posted: **Fri Mar 20, 2020 6:33 am**

So testing the cockpit into the mix and I see that most of the front of the engine disappears

I was thinking of going curbside, but there are no provisions in the kit for the drivetrain rear end display or underside; you know, like fake panels of curbside kits.So I think I just go full on and keep the engine in despite seeing very little of it.
After some discussion with @bfrd this is the example of how it will get painted

Then the interior will be black with red accents

Posted: **Sat Mar 21, 2020 12:45 am**

Body in grey primer

But who gives a flying f

So you used great as Ultimate grey easily lays down super smooth, no diluting and is simple to clean with minimal fumes
As Matthew pointed out, it will be easier to paint the top coat black over grey than it would have been black over black

Posted: **Sat Mar 21, 2020 5:22 am**

Grey Ultimate
Dry fit
Fine

Posted: **Sat Mar 21, 2020 5:43 am**

Pinstripe test
Stretch it a little, tap in groove carefully

Posted: **Sat Mar 21, 2020 6:18 am**

How have I missed this

Great looking engine lovely detailing and super smooth primer on the body

Posted: **Sat Mar 21, 2020 2:01 pm**

Great Job, buddy! That engine looks amazing, it's a shame to hide it away..

Even though I'm a huge advocate of "if it's a Ferrari, it must be Ferrari Red", I reckon that paint scheme will look deadly!!!

Keep up with the great work!!!

Posted: **Sun Mar 22, 2020 5:28 am**

Cheers guys

Amazed anyone is actually posting

Posted: **Sun Mar 22, 2020 5:29 am**

I had a red car and I want to paint it black

So I did

Posted: **Sun Mar 22, 2020 5:30 am**

Posted: **Tue Mar 24, 2020 4:08 pm**

More work on the self isolation Ferrari build
This is interior work time. I drilled al the holes out of the Daytona-style seats

Then did the red black theme and used some photo etch I have as accents
Combos of Ultimate black(flat) and Ultimate gloss black. The red is Tamiya flat red over Ultimate white to let it pop

Thinking of deeper dishing the rear wheels

Probably not as it is not the standard look.

Found the car in blue, looks really sweet

Posted: **Fri Mar 27, 2020 12:56 am**

More work on interior and engine placements. Stuff is glued in now.
Seat belts out of tape , styrene clips made

Posted: **Sun Mar 29, 2020 7:39 am**

Wow busy forum, my car is like three pages deep! Awesome to see more action online

Messed with wheel details; a black insert or a red line....consensus is leave them be silver

Got the door hinges glued up and the front hood bonnet. The rear engine lid is still loose and can be added at the last moment

Touch up primer work around one fuel filler door as my TET ran out and spoiled the paint

Now the paint.
The Alclad black gloss base looks awesome right away and then fades fast with touching.
It is almost sticky and especially noticeable when you hold a spot and warm it up, the paint starts to feel weird. Tons of fingerprints too

So on the headlights, I tested some Mr Color GX2 gloss black overtop the Alclad...nice.

This is what I will do with a Mr Color GX gloss coat after

Posted: **Sun Mar 29, 2020 8:31 am**

Looking good and nice work and you seem to be having the Alclad black syndrome and the main reason I dont use it anymore. Lots of people report this problem its like you say its like its half cured and handling makes it even softer. It has been blamed on a bad paint batch but that was years ago and thinning it down too much [ you shouldnt thin it just use straight from the bottle/can] or its old and gone off in the bottle . Some people get it others dont but most people just strip and start again the main reason being it never really goes off and that there have been reports of bad paint reactions if you put anything but alclad on top of it. Sorry to be the bearer of bad news but I would bin the paint and use a good gloss black from any paint maker from now on and it may be the case that you will need to strip the body too.

Do a search on google using 'problems with alclad black base' and you can read the same as I have.

Posted: **Sun Mar 29, 2020 10:39 am**

Reminds me of the issues I had with Mr Hobby Auqeous gloss when I used levelling thinner, it dried like a rice pudding even after a week in an airing cupboard. What thinner if any have you been using Scott?

Posted: **Sun Mar 29, 2020 4:34 pm**

Kevthemodeller wrote: Sun Mar 29, 2020 10:39 am Reminds me of the issues I had with Mr Hobby Auqeous gloss when I used levelling thinner, it dried like a rice pudding even after a week in an airing cupboard. What thinner if any have you been using Scott?

Hawkmoon wrote: Sun Mar 29, 2020 8:31 am Looking good and nice work and you seem to be having the Alclad black syndrome and the main reason I dont use it anymore. Lots of people report this problem its like you say its like its half cured and handling makes it even softer. It has been blamed on a bad paint batch but that was years ago and thinning it down too much [ you shouldnt thin it just use straight from the bottle/can] or its old and gone off in the bottle . Some people get it others dont but most people just strip and start again the main reason being it never really goes off and that there have been reports of bad paint reactions if you put anything but alclad on top of it. Sorry to be the bearer of bad news but I would bin the paint and use a good gloss black from any paint maker from now on and it may be the case that you will need to strip the body too.

Do a search on google using 'problems with alclad black base' and you can read the same as I have.

Yes I remember the Alclad issues, especially with their clear before the Aquagloss came out
I used it neat right out of the bottle
At this point the Mr Color went on and hardened well overtop and I will monitor it, maybe try the bonnet first.
If not preforming, I will strip the whole thing

Posted: **Sun Mar 29, 2020 7:45 pm**

So far two coats on the rear deck of Mr Color GX gloss black with MLT have gone down nice and smooth.
It has hardened up very nicely as well
Will do a clear coat of GX 112 overtop tonight and see how it goes

Posted: **Mon Mar 30, 2020 7:16 pm**

So.
Black is all repainted and drying now.
The engine deck lid was my test piece and this is what it got

Coats of black (1:1 MLT) yesterday and then two coats of clear (1:1 w MLT) plus a final thin mist of just MLT to smooth everything
I have some dust in there as the slightly tacky Alclad black is a freaking dust magnet

Holy cow I fought to clean, tac rag and tape grab any bits of dust, styrene sanding residue.

The body is all painted, just gonna let it harden up before clear coat.

Posted: **Mon Mar 30, 2020 7:33 pm**

Looking good Scott and nice work

Posted: **Mon Mar 30, 2020 8:08 pm**

Hawkmoon wrote: Mon Mar 30, 2020 7:33 pm Looking good Scott and nice work

Thanks
Hopefully have dodged a black bullet

Posted: **Mon Mar 30, 2020 9:57 pm**

That will do pig, that will do

This is the gloss black, no clear yet.
I don’t have enough 2K clear to do the entire body or I would. Will have to settle for the GX 112

Posted: **Mon Mar 30, 2020 10:00 pm**

This is looking great, Scott!! I haven't been following (just missed it), but like where you took this one. In for the final for sure!

Posted: **Mon Mar 30, 2020 10:08 pm**

barryf1fan wrote: Mon Mar 30, 2020 10:00 pm This is looking great, Scott!! I haven't been following (just missed it), but like where you took this one. In for the final for sure!

Thanks Barry, it is getting closer to the end.
Doesn’t look like a full body strip for once

Posted: **Tue Mar 31, 2020 1:05 am**

Not far off before this is in the display case

Posted: **Tue Mar 31, 2020 1:31 am**

I think this looks great. I particularly like what you did with the wheels. Great build.

Global Scale Modeller

1/16 Fujimi Ferrari GTO

1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO

Re: 1/16 Fujimi Ferrari GTO