Ism Friday's night live at the bench what have you been working on for *March 6th*

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by Kingdan »

Imagee
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, March 6th/13th**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.
Last edited by Kingdan on Wed Mar 11, 2020 4:56 pm, edited 1 time in total.
User avatar
KalebB
Command Sergeant Major
Command Sergeant Major
Posts: 934
Joined: Thu Feb 06, 2014 6:01 am
Location: Southern Indiana, USA
United States of America

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by KalebB »

Currently working on a Zvezda T-26 in 1/35th scale.

Currently still needs the fenders attached, camouflage applied, decals put on and then the weathering shall commence! :banana:
Image

Cheers and happy Friday to the live stream dream team
"This is Jack Burton in the Pork Chop Express, and I’m talkin’ to whoever’s listenin’ out there" ~ Jack Burton

On the Bench
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by Kingdan »

Been working on the aliens (don't want to call him Paul) eyes he's close to being finished now🙃
Kit manufacturer is killerkits/creaturefeatures
Not sure on scale he is about 13 inches tall
Painted in a bunch of Tamiya lp paints with some badger minitaire paint thrown in
The eyes have been painted with Ultimate black primer then a few coats of gx100 to give then a good shine still a bit to do but he's close
All sprayed with the fabulous ultimate apex airbrush
Image
Hawkmoon
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2121
Joined: Fri Mar 01, 2019 7:19 pm
England

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by Hawkmoon »

Meng Leopard 2 A7+ 1/35

Getting close to the finish line with this one now lower hull painted with AK real color lacquers sandbeige and weathered with Kursk earth.

The upper hull has had a base coat of sand beige with the other colors used grey beige and light olive to finish the camo. just the detail to add now before she is complete.

ImageP3056287 by andrew purchase, on Flickr
F27pax
Sergeant
Sergeant
Posts: 136
Joined: Mon Jun 18, 2018 2:52 pm
Australia

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by F27pax »

Good evening happy modellers

Just off the work bench is this 1/72 Farman 370, a very short run resin kit sent to me by the French modeller Adrien Roy. The base is Tamiya rattle can grey primer, the top coat is Tamiya TS-10 French Blue with Tamiya LP-20 Light Gun Metal for the radiators, AK Real Color RAF Dark Earth overpainted with Modelmaster Non-buffing Brass Metalizer for the exhausts and Modelmaster Wood for the propellor. It's not a large model.

Image
User avatar
onemac
Sergeant First Class
Sergeant First Class
Posts: 317
Joined: Sun May 15, 2016 6:24 pm
Location: Lossiemouth, UK
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by onemac »

1/48 Trumpeter F-106A and 1/35 Academy AH-1Z. Decalling started on both with the aftermarket decals on the 106 being quite fragile :doh: The kit decals on the AH-1Z are too close to the paint callout for my liking but hey, it'll work :thumb1:

Image
Currently on the bench:

1/32 Tamiya F-15E Strike Eagle
1/48 GWH T-33 Shooting Star
1/48 Revell (Monogram) F-15C Eagle
Tankboy76
Corporal
Corporal
Posts: 60
Joined: Thu Apr 25, 2019 6:37 am
Location: Crystal, MN, USA
United States of America

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by Tankboy76 »

I'm in the middle of this Tamiya 911. Its primed and base coated in Splash paints - grey primer and Slate Grey Metallic. Clear Coating tomorrow after I touch up a torn decal.

Image
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

Post by RangerNeil »

I'm still working on the Zvezda Ka-28..... Mostly complete, this weeks is working on the armaments whilst waiting to hear from Revell.de if they have a spare decal sheet for their version which includes the IP and cockpit walls.

Image
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    User avatar
    Kingdan
    Warrant Officer
    Warrant Officer
    Posts: 1407
    Joined: Thu Jun 05, 2014 11:42 pm
    Location: Sutton in Ashfield nr Mansfield Nottinghamshire
    Contact:
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Kingdan »

    It’s a roll over this week folks
    Hawkmoon
    Chief Warrant Officer 3
    Chief Warrant Officer 3
    Posts: 2121
    Joined: Fri Mar 01, 2019 7:19 pm
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Hawkmoon »

    Meng 1/35 Leopard 2 A7+

    Calling this one done went together well despite the postys attempts to destroy the kit in transit. The tracks went together ok but the joining pieces can be on the fragile side. All in all a nice kit from Meng. There are two decal crosses to add decal wise but I didn't add them as this was a prototype tank.

    Main colors used were AK's real color lacquer's Sand biege, grey beige, light olive Tamiya and Vallejo colors used on the tracks other parts, light weathering done with a 50/50 mix of enamel Kursk earth and odourless thinners.

    ImageP3076308 by andrew purchase, on Flickr
    User avatar
    Twokidsnosleep
    General
    General
    Posts: 18481
    Joined: Thu Aug 07, 2014 4:07 pm
    Location: BC,Canada
    Canada

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Twokidsnosleep »

    Howdy all and happy Friday..all going well I have the day off :banana:
    Got something built and off the desk MPC 1/8 Honda Trail bike
    Bit of a pig of a kit, no numbers on part sprues, rubber tires in four halves etc etc, moan moan moan :shifty:
    Paint is Bare Metal Foil aluminum+red Sharpie felt pen+clear Tamiya red on top. Thus a metallic candy red.
    Hope everyone has a great weekend :cheers2:

    Image
    Scott

    On, Under or near the desk
    Mr Tamiya Memorial build...Alfa Romeo Bt-46
    User avatar
    KalebB
    Command Sergeant Major
    Command Sergeant Major
    Posts: 934
    Joined: Thu Feb 06, 2014 6:01 am
    Location: Southern Indiana, USA
    United States of America

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by KalebB »

    Working on this Trumpeter PT-76 Amphibious tank in 1/35 this week
    Construction is finished and now onto primer and paints

    Great kit so far!

    Image
    "This is Jack Burton in the Pork Chop Express, and I’m talkin’ to whoever’s listenin’ out there" ~ Jack Burton

    On the Bench
    CaptainBigelow
    Private First Class
    Private First Class
    Posts: 36
    Joined: Fri May 11, 2018 3:36 am
    Location: Virginia, USA
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by CaptainBigelow »

    I just finished my 1/72 GWH F-14D. Great kit and a blast to build. OOB with the exception of some Quickboost resin seats. I displayed it with a couple of Reedoak 1/72 ground crew figures and a Coastal Kits base.

    I painted this using various lacquer paints, LP Tamiya and Hataka. Weathering was done using a clay wash for the panel lines and then neat oils on top of that.

    I have been really busy lately, but hope to have the time to join another hangout again soon!

    Image
    User avatar
    Tomcat64
    Brigadier General
    Brigadier General
    Posts: 7188
    Joined: Thu Sep 22, 2016 3:24 pm
    Location: Swindon, UK
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Tomcat64 »

    Think I'm finally on the finishing stretch with my 1/35 Tamiya Tiger 1 (late) dio. The crew have been finished off and installed, there's a couple of lads from the field maintenance kit trying to work out what's wrong with the engine supervised by a suitably shouty NCO and a group from the Machine Gun crew on Manoeuvres set hoping the tank crew put the hand-brake on. Figures so far have been painted using a mix of Vallejo & Andrea colours. Just the last six figures to do and then a handful of accessories and we'll call it done unless I can think of something else to throw at it.
    Image
    Cheers, Neil

    On the Bench:
    Revell 1/72 Millennium Falcon - stalled due to stupidity
    Tamiya 1/35 Stegosaurus Stenops
    Tamiya 1/35 Sherman Firefly VC
    DanEdmans
    Private
    Private
    Posts: 18
    Joined: Fri Apr 26, 2019 1:18 pm
    Location: Saffron Walden
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by DanEdmans »

    Hi Dan, this week I finished my 1/24 Aoshima Greddy Rocket Bunny Toyota 86. Great kit for the money, bar having to modify the lights to get them to fit after the body work was painted. Pretty pleased how this one turned out.

    Primed in Ultimate Gelb for the body.
    Other Ultimate primers used elsewhere.
    Zero paints Toyota Lightning Red for the body.
    Tamiya LP paints everywhere else.
    All Chrome bleached and repainted.
    Pro Range 2K.
    Micro mesh, Micro Gloss and Tamiya Wax.
    Zero textured paints for some interior.
    Ultimate decal solutions
    Ultimate Apex with both 0.2 and 0.35 needle sets.

    Have a great show and a wonderful weekend everybody 👌

    Image
    User avatar
    Paul
    Site Admin
    Site Admin
    Posts: 12622
    Joined: Thu May 23, 2013 4:47 pm
    Location: Merseyside, England, UK
    Contact:
    England

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Paul »

    Tamiya Toyota Supra SARD
    Primed in Ultimate Modelling Grey Primer
    Painted in Gravity (spain) Mclaren Lantana Purple
    Cleared in Gravity (spain) 2k Clear
    Wheels painted in Tamiya LP-70 Gloss aluminium
    All painted with the Ultimate Apex
    Polished with Micromesh and Ultimate polished and Wax

    Image
    User avatar
    Novorus
    Master Sergeant
    Master Sergeant
    Posts: 401
    Joined: Mon Jul 06, 2015 5:03 pm
    Location: Hertfordshire
    Great Britain

    Re: Ism Friday's night live at the bench what have you been working on for *March 6th*

    Post by Novorus »

    Well Bob, this week I have cracked on with the 1/48 Diorama base of a dock for a little off the wall build for myself.
    Balsa foam for the walls on a base of Styro foam and a little cork for the stairs thrown in for good measure.
    Happy modelling all, thanks for looking.
    Image
    James
    https://www.youtube.com/channel/UCZnEdt ... s3LTfQW4Eg Remember like, share and subscribe
    Remember the 20th March 2020 is the Model Officer Mess birthday bash, come and join in."Fokker's Foe's"
    https://www.facebook.com/groups/217021638777483/
    Post Reply

    Return to “Modelling Chat”